This set of Advanced Manufacturing Engineering Questions & Answers focuses on “Grinding-2”.
1. Which of the following grinding wheel specified in ISO designation will represent Vitrified bond?
a) Z 46 K 5 E 17
b) C 600 K 5 B 17
c) C 8 K 5 R 17
d) A 80 K 5 V 17
View Answer
Explanation: Fifth place of ISO designation of the grinding wheel represents a type of bond and “V” represents Vitrified bond type.
2. Grinding wheel specified as “C 8 K 5 R 17” in ISO designation. What is the type of bond present in grinding wheel?
a) Vitrified
b) Rubber
c) Shellac
d) Epoxy
View Answer
Explanation: Fifth place of ISO designation of the grinding wheel represents a type of bond and “R” represents rubber.
3. Which of the following grinding wheel specified in ISO designation will represent Resin bond?
a) Z 46 K 5 E 17
b) C 600 K 5 B 17
c) C 8 K 5 R 17
d) A 80 K 5 V 17
View Answer
Explanation: Fifth place of ISO designation of the grinding wheel represents the type of bond and “B” represents resin bond.
4. Which of the following grinding wheel specified in ISO designation will represent Shellac bond?
a) Z 46 K 5 E 17
b) C 600 K 5 B 17
c) C 8 K 5 R 17
d) A 80 K 5 V 17
View Answer
Explanation: Fifth place of ISO designation of the grinding wheel represents a type of bond and “E” represents shellac.
5. Grinding wheel specified as “A 8 K 5 P 17” in ISO designation. What is the type of bond present in grinding wheel?
a) Vitrified
b) Rubber
c) Shellac
d) Epoxy
View Answer
Explanation: Fifth place of ISO designation of the grinding wheel represents a type of bond and “P” represents rubber.
6. Which of the following will not have open structure?
a) A 46 K 5 B 17
b) C 600 K 8 B 17
c) C 8 K 5 9 17
d) A 80 K 10 B 17
View Answer
Explanation: Fourth place of ISO designation of the grinding wheel represents Structure and “5” comes under dense structure.
7. Which of the following has open structure?
a) A 46 K 5 B 17
b) C 600 K 8 B 17
c) C 8 K 5 3 17
d) A 80 K 4 B 17
View Answer
Explanation: Fourth place of ISO designation of the grinding wheel represents Structure and “8” comes under open structure.
8. A grinding wheel is specified as “C 10 K 8 R 17”. Which of the following is correct about this grinding wheel?
a) Very fine grains
b) Open structure
c) Aluminum oxide abrasive
d) Coarse grain
View Answer
Explanation: Fourth place of ISO designation of the grinding wheel represents Structure and “8” comes under open structure.
9. A grinding wheel is specified as “A 5 K 5 R 17”. Which of the following is correct about this grinding wheel?
a) Very fine grains
b) Open structure
c) Aluminum oxide abrasive
d) Coarse grain
View Answer
Explanation: First place of ISO designation of the grinding wheel represents grain type and “A” represents aluminum oxide.
10. A grinding wheel is specified as “C 5 K 5 R 17”. Which of the following is correct about this grinding wheel?
a) Very fine grains
b) Open structure
c) Rubber bond
d) Coarse grain
View Answer
Explanation: Fifth place of ISO designation of the grinding wheel represents a type of bond and “R” represents rubber.
11. A grinding wheel is specified as “A 8 K 5 P 17”. Which of the following is correct about this grinding wheel?
a) Very fine grains
b) Open structure
c) Rubber bond
d) Coarse grain
View Answer
Explanation: ‘8’ represents grain size, which is coarse.
12. Friability of grinding wheel is associated to
a) Hardness
b) Fracture
c) Size
d) None of the mentioned
View Answer
Explanation: Friability is the ability to fracture under pressure so that when cutting edge become dull, the grain breaks off and exposes new grains which are sharp.
13. With time, grinding wheel starts rubbing work piece instead of cutting, due to a decrease in sharpness. This phenomenon is known as
a) Loading
b) Glazing
c) Dressing
d) Trueing
View Answer
Explanation: Glazing occurs when grinding wheel starts rubbing work piece instead of cutting.
14. Loss in the sharpness of grinding wheel due to the presence of chips in gaps of grains is termed as
a) Loading
b) Glazing
c) Dressing
d) Trueing
View Answer
Explanation: Loading decrease sharpness of grinding wheel, when foreign material comes in between free space of wheel.
Sanfoundry Global Education & Learning Series – Manufacturing Engineering.
To practice advanced questions on all areas of Manufacturing Engineering, here is complete set of 1000+ Multiple Choice Questions and Answers.
If you find a mistake in question / option / answer, kindly take a screenshot and email to [email protected]
- Check Manufacturing Processes I Books
- Apply for Mechanical Engineering Internship
- Check Mechanical Engineering Books
- Practice Mechanical Engineering MCQs
- Practice Metallurgical Engineering MCQs
