This set of Metal Forming Multiple Choice Questions & Answers (MCQs) focuses on “Extrusion and Wire Drawing”.
1. Extrusion process is not suitable for which of the following?
a) Steel alloys
b) Non-ferrous alloys
c) Stainless steel
d) Iron
View Answer
Explanation: Extrusion process is not suitable for any of the iron alloys, neither is it suitable for iron metal. For extruding stainless steel or other non-ferrous alloys or steel alloys, extrusion process can be used.
2. Which of the following is not made using extrusion?
a) Window frames
b) Doors
c) Helmets
d) Rods
View Answer
Explanation: Among the following, helmets are not manufactured using extrusion, whereas all other products can be manufactured using extrusion.
3. What is the shape of the billet used in extrusion process?
a) Cubical
b) Spherical
c) Cylindrical
d) Pyramidal
View Answer
Explanation: The shape of the billet in an extrusion process is designed to be cylindrical only. A cubical or spherical or a pyramidal billet cannot be designed for a good output.
4. Which of the following is also called as forward hot extrusion?
a) Direct extrusion
b) Indirect extrusion
c) Impact extrusion
d) Hydrostatic extrusion
View Answer
Explanation: Direct extrusion is also called as forward hot extrusion. This method is most widely used and maximum production is done by this method in extrusion.
5. Backward extrusion is another name for which of the following?
a) Direct extrusion
b) Indirect extrusion
c) Impact extrusion
d) Hydrostatic extrusion
View Answer
Explanation: Direct extrusion is also called as backward extrusion. In this method, the metal is extruded back into the plunger.
6. In which of the following operations is a dummy block used?
a) Indirect extrusion
b) Direct extrusion
c) Impact extrusion
d) Hydrostatic extrusion
View Answer
Explanation: In direct extrusion or forward extrusion, a dummy block is used during the functioning of the extrusion process.
7. Indirect extrusion needs a large amount of force for functioning.
a) True
b) False
View Answer
Explanation: Indirect extrusion or backward extrusion does not require a large amount of force for operation, as the billet is stationery.
8. Up to what size can wires can be drawn by wire drawing process?
a) 0.01mm
b) 0.02mm
c) 0.03mm
d) 0.04mm
View Answer
Explanation: It may be counted among one of the limitations of drawing process, that very thin wires can only be drawn from it. In wire drawing process, wires can be drawn up to the size of 0.03mm.
9. Which of the following metal is used in the wire drawing process in die making?
a) Copper
b) Iron
c) Tungsten
d) Magnesium
View Answer
Explanation: For making dies in the wire extrusion process, copper or iron or magnesium cannot be used, but the compound tungsten carbide is used.
10. A solid ram is used in direct extrusion.
a) True
b) False
View Answer
Explanation: A solid ram is used in direct extrusion or forward extrusion, whereas a hollow ram is used in indirect extrusion.
Sanfoundry Global Education & Learning Series – Forming.
To practice all areas of Forming, here is complete set of 1000+ Multiple Choice Questions and Answers.