Advanced Machining Questions and Answers – Abrasive Jet Machining – Introduction and Machining system

This set of Advanced Machining Processes Multiple Choice Questions & Answers (MCQs) focuses on “Abrasive Jet Machining – Introduction and Machining system”.

1. In advanced machining processes, what is the full form of AJM?
a) Automatic Jet Manufacturing
b) Abrasive Jet Machining
c) Automated Jet Machining
d) Abrasive Jet Manufacturing
View Answer

Answer: b
Explanation: In advanced machining processes, full form of AJM is Abrasive jet machining.

2. In AJM, which of the following materials are used as abrasive grains?
a) Al2O3
b) SiC
c) Glass beads
d) All of the mentioned
View Answer

Answer: d
Explanation: In Abrasive jet machining, any of the particles mentioned above can be used as abrasive grains.

3. In Abrasive jet machining, work piece material of removed by which of the following means?
a) Vaporization
b) Electro plating
c) Mechanical abrasion
d) Corrosion
View Answer

Answer: c
Explanation: Abrasive particles hit the surface with high pressure and high velocities, which removes the material.
advertisement
advertisement

4. Which type of materials can be machined using Abrasive jet machining?
a) Glass
b) Ceramics
c) Hard materials
d) All of the mentioned
View Answer

Answer: d
Explanation: Materials like ceramics, glass, hard and super hard materials can be machined using Abrasive jet machining.

5. In machining system of AJM, which is the medium of carrying the abrasive grains for machining?
a) Liquids
b) Gases
c) Any fluids
d) None of the mentioned
View Answer

Answer: b
Explanation: In AJM, different types of gases are used as the medium for carrying abrasives.
Sanfoundry Certification Contest of the Month is Live. 100+ Subjects. Participate Now!

6. In machining system of AJM, what is/are the gas/es used for carrying the abrasives?
a) CO2
b) Air
c) Nitrogen
d) All of the mentioned
View Answer

Answer: d
Explanation: In AJM, gases like CO2, air or nitrogen are used to carry the abrasives.

7. What is the pressure of gas that is to be supplied, for carrying the abrasives?
a) 0.1 to 1.0 kg/cm2
b) 2.0 to 8.0 kg /cm2
c) 10.0 to 18.0 kg/cm2
d) 25.0 to 35.5 kg/cm2
View Answer

Answer: b
Explanation: The pressure of the carrying gas should range between 2 to 8 kg/cm2.
advertisement

8. Which of the following gas, should never be used as the carrier of abrasives?
a) Nitrogen
b) CO2
c) Oxygen
d) Air
View Answer

Answer: c
Explanation: Oxygen should not be used as carrier because it causes a violent chemical reaction with abrasives or work piece.

9. What is the frequency of mixing chamber, consisting of gas and abrasives?
a) 10 Hz
b) 30 Hz
c) 50 Hz
d) 70 Hz
View Answer

Answer: c
Explanation: Mixing chamber consisting of carrier gas and the abrasive grains, vibrates at a frequency of 50 Hz.
advertisement

10. In Abrasive jet machining, what may be the size of the abrasive grains used?
a) 10 – 40 µm
b) 50 – 100 µm
c) 100 – 150 µm
d) 200 – 300 µm
View Answer

Answer: a
Explanation: Abrasive grains of size, between 10 – 40 µm can be used for machining.

11. What are the processes where Abrasive jet machining can be used?
a) Cleaning
b) Cutting
c) Deburring
d) All of the mentioned
View Answer

Answer: d
Explanation: Abrasive jet machining can be used for deburring, cutting, cleaning and for many other heavy duty applications.

12. State whether the following statement is true or false.
“In Abrasive jet machining, commercial grades powders can be used for machining.”
a) True
b) False
View Answer

Answer: b
Explanation: For AJM, commercial grade powders are not used because their sizes are not classified widely.

13. In machining system of AJM, which of the following controls the relative motion between work piece and nozzle?
a) Cam drives
b) Pantographs
c) Trace mechanisms
d) All of the mentioned
View Answer

Answer: d
Explanation: Relative motion in Abrasive jet machining can be controlled by the above mentioned means.

14. Masks, which are used to confine the jet stream location on work piece are made of, which type of materials?
a) Copper
b) Glass
c) Rubber
d) All of the mentioned
View Answer

Answer: d
Explanation: Masks can be made of any of the above-mentioned materials.

Sanfoundry Global Education & Learning Series – Advanced Machining.

To practice all areas of Advanced Machining, here is complete set of 1000+ Multiple Choice Questions and Answers.

If you find a mistake in question / option / answer, kindly take a screenshot and email to [email protected]

advertisement
advertisement
Subscribe to our Newsletters (Subject-wise). Participate in the Sanfoundry Certification contest to get free Certificate of Merit. Join our social networks below and stay updated with latest contests, videos, internships and jobs!

Youtube | Telegram | LinkedIn | Instagram | Facebook | Twitter | Pinterest
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & discussions at Telegram SanfoundryClasses.