Pollution Control Books

«
»

We have compiled the list of Best Reference Books on Pollution Control subject. These books are used by students of top universities, institutes and colleges. Here is the full list of best books on Pollution Control along with reviews.

Kindly note that we have put a lot of effort into researching the best books on Pollution Control subject and came out with a recommended list of best books. The table below contains the Name of these best books, their authors, publishers and an unbiased review of books on “Pollution Control” as well as links to the Amazon website to directly purchase these books. As an Amazon Associate, we earn from qualifying purchases, but this does not impact our reviews, comparisons, and listing of these top books; the table serves as a ready reckoner list of these best books.

List of Pollution Control Books with author’s names, publishers, and an unbiased review as well as links to the Amazon website to directly purchase these books.

advertisement

1. Pollution Control and Monitoring

1. “Environmental Pollution Monitoring and Control” by S M Khopkar

“Environmental Pollution Monitoring and Control” Book Review: This book introduces air and water pollution, waste and water management and noise pollution. It describes environmental modelling, impact assessment and how to recycle waste water. This text mentions bio monitoring and relationships between environment, energy and population. Several tables of pollution and its facets are covered. Monographs are present in the book related to pollution with various references. This acts as a reference for undergraduate and postgraduate students. Active research workers will also be benefitted from this book in the areas of environmentally science and engineering.

2. “Air Pollution: Supplement to Measurements, Monitoring, Surveillance, and Engineering Control: 7 (Environmental Sciences)” by Arthur C Stern

advertisement
advertisement
“Air Pollution: Supplement to Measurements, Monitoring, Surveillance, and Engineering Control: 7 (Environmental Sciences)” Book Review: This book includes important topics like asbestos, carbon dioxide, lead and nuclear accidents. Non-ionizing radiation, stratospheric ozone and visibility are covered in this text. This will be suitable for the air pollution control agency, research scientists and consultants. This text will also be beneficial to the law firms engaged in air pollution litigation. Even instrument manufacturers can find this book useful. Topics like acidic deposition, indoor air pollution, long range transport and toxic substances are highlighted in this book.

3. “Pollution Monitoring and Control” by V K Prabhakar

“Pollution Monitoring and Control” Book Review: This book focuses on the domains of environment and predictions through the EiA study. Climatological and environmental factors are covered in this book. It features the regulatory mechanisms of environmental compliance and implications. The book highlights the pollution monitoring and control. Topics like air pollution monitoring, control, ganga action plan, waste water treatment and management are mentioned here. It includes industrial pollution abatement and environmental audit.

4. “Urban Air Pollution: Monitoring and Control Strategies (Nato Science Partnership Subseries: 2)” by Ivo Allegrini and Franco DeSantis

advertisement
“Urban Air Pollution: Monitoring and Control Strategies (Nato Science Partnership Subseries: 2)” Book Review: This book includes the proceedings of NATO workshop. Different researches of urban air pollution are covered in this book. It explains the level of atmospheric pollutants in the air and concerns of developing countries among the authorities. Air quality guidelines are provided in the book. Problems on pollutants like nitrogen oxides, nitric, nitrous acid and photochemical oxidants are addressed in the book. The book highlights atmospheric chemistry and processes in the urban atmosphere.

5. “Power Generation: Air Pollution Monitoring and Control” by Kenneth E Nell and Wayne T Davis

“Power Generation: Air Pollution Monitoring and Control” Book Review: This book covers pollutants, emission, monitoring and their effects. Different Sox and Nox emissions are addressed in the book. This book focuses on the domains of environment and predictions through the EiA study. Climatological and environmental factors are covered in this book. It features the regulatory mechanisms of environmental compliance and implications. The book highlights the pollution monitoring and control. Topics like air pollution monitoring, control, ganga action plan, waste water treatment and management are mentioned here. It includes industrial pollution abatement and environmental audit.

6. “Air Pollution Control: Measuring and Monitoring Air Pollutants Pt. 3 (Environmental Science and Technology Series)” by W Strauss

“Air Pollution Control: Measuring and Monitoring Air Pollutants Pt. 3 (Environmental Science and Technology Series)” Book Review: This book introduces urban meteorology and air pollution distribution. Information on plant life, coatings, filtration and incineration are mentioned here. It also describes the environmental control on quality analysis.

advertisement
7. “Air Pollution Control and Monitoring Techologies in China: A Strategic Entry Report, 2000” by Waste Management Research Group

“Air Pollution Control and Monitoring Technologies in China: A Strategic Entry Report, 2000” Book Review: This book deals with strategic planners initially. It covers the methodologies and explains how to access markets. It mentions the demand forecasts and accessibility benchmarks. This book highlights marketing and distribution, economic fundamentals and export investment options. Topics such as risk assessments on political, legal, culture and human resources are included. Many graphs are provided in this book.

8. “Air Pollution Control Equipment Calculations” by Louis Theodore

“Air Pollution Control Equipment Calculations” Book Review: This book introduces air pollution control equipment and important applications. Factors of the equipment performance is present in the book. The book highlights topics such as gaseous pollutants, absorption and incineration equipment. The book includes airborne particulate pollutants, gravity settlers, cyclones and baghouses. Other information on electrostatic precipitators and scrubbers are present in the book. It features different appendices on hybrid systems and SI systems. A cost equipment model is present in the book. It describes developments in pollution control, performance equations and maintenance calculations. This book is a good reference for engineering students, engineers and technicians in air pollution control standards.

9. “Monitoring, Control and Effects of Air Pollution” by Corbin Tennyson

advertisement
“Monitoring, Control and Effects of Air Pollution” Book Review: This book reflects problems of pollutants, emissions, monitoring and their effects. Different aspects of pollutants with their effects and principles are mentioned in the book. It explains the portable monitoring tools to control monitoring effects.

10. “Environmental Impacts of Mining Monitoring, Restoration, and Control” by Mritunjoy Sengupta

“Environmental Impacts of Mining Monitoring, Restoration, and Control” Book Review: This book covers environmental problems of mining. The book highlights information on destruction of landscapes, agricultural and forest lands. Sedimentation, erosion, soil contamination and groundwater pollution are mentioned in this book. It also describes air pollution and waste management. It discusses various techniques on how to reduce environmental damage. Also it provides solutions for degraded areas. This book is very much useful for environmental consultants, regulators and workers involved in the mining industry. It will act as a reference for geologists, hydrologists and instructors in environmental sciences.


2. Pollution Control Systems

1. “Pollution Control in Process Industries” by Mahajan S P

“Pollution Control in Process Industries” Book Review: The book covers aspects of industrial pollution and ways to prevent the same. Students of undergraduate and postgraduate level courses in chemical engineering and practising engineers can access this book. Analysis of liquid gaseous effluents and control of specific effluents is elucidated. Emphasis is laid on pollution control aspects of fertiliser industries, petroleum refineries and petro-chemical units. The book also includes actual pollution data of various industries thereby demonstrating pollution control strategies in an application-based approach.

2. “Liquid waste of Industry – Theories, Practices and Treatment” by N L Nemerow
3. “Physico-Chemical Processes for Water Quality Control” by W J Weber
4. “Industrial Gas Cleaning” by W Strauss
5. “Innovation in Air Pollution Control Systems” by Sumit Luthra

“Innovation in Air Pollution Control Systems” Book Review: The main idea of the book is advancements in technology to prevent air pollution in recent times. It suits the needs of researchers and practitioners of the field. Strategies employed by Air Quality Control Systems (AQCS) and Environmental Control Services (ECS) are illustrated. Analysis of technological breakthroughs is based on the principle that certain companies employ research and development to innovate and hence patent them.

6. “Combustion and Pollution Control in Heating Systems” by Hanby Hanby

“Combustion and Pollution Control in Heating Systems” Book Review: The book focuses on combustion of hydrocarbon fuels. It is mainly prescribed for students of undergraduate level courses. Algorithms that can be extended as code to solve various numerical problems are incorporated. Calculation of fluid properties and their applications in larger programs is explained. The readers can find numerical problems included wherever required.

7. “Model Predictive Control of Wastewater Systems” by Carlos Ocampo-Martinez

“Model Predictive Control of Wastewater Systems” Book Review: The book focuses on analysis and treatment of wastewater systems. It can be referred to by researchers and control engineers working in the field. Numerous model predictive control strategies employed in control of complex wastewater systems are described. Effects of system disturbance on the control loop is covered. Fault-tolerant architecture and faults in system actuators are elaborated. Actuator faults are explained using hybrid modeling techniques.

8. “Safety Health and Security in Wastewater Systems” by Water Environment Federation

“Safety Health and Security in Wastewater Systems” Book Review: The book covers all the important aspects of health safety related to wastewater systems. It can be accessed by anyone interested in the domain. Regulatory compliance, reduction of liability, reduction of costs, and prevention of injury and illness along with biological hazards are covered. The book begins by introducing readers to health and safety before dealing with predictability of hazards. Further, the book talks about safety and health concerns in wastewater treatment facilities and sewer collections. The book also elucidates concepts of hazardous waste and personal protective equipment.

9. “Water-Quality Engineering in Natural Systems” by David A Chin

“Water-Quality Engineering in Natural Systems” Book Review: The book in discussion emphasises on multi-facetted concepts of the water environment. Undergraduate and graduate students in the field of civil engineering or environmental sciences along with researchers can refer to this book. Impact of chemical discharges into various water bodies such as rivers, lakes, wetlands, ground water, and oceans is covered along with the limitations of the type of pollutant discharged. Characteristics of water runoff in urban and agricultural watersheds is explained. Readers can find several worked out problems and numericals at the end of each chapter. A few other concepts included are: fate and transport of contaminants in the water environment, design of remediation systems, regulatory constraints, use–attainability analysis, estimation of total maximum daily loads.

10. “Basic Environmental Technology: Water Supply, Waste Management & Pollution Control” by Jerry A Nathanson M S P E

“Basic Environmental Technology: Water Supply, Waste Management & Pollution Control” Book Review: The book presents concepts of waste supply and pollution control mainly. It is prescribed for civil engineers, water treatment professionals and workers of the field. An overview of the environment technology and applications in public health, ecology, geology, and soils is provided. The required mathematical concepts are included wherever necessary. Emphasis is laid on water and wastewater topics such as hydraulics and hydrology, water quality and water pollution. A few other topics incorporated include: drinking water treatment and distribution, sewage collection, sewage treatment and disposal, stormwater water management, air pollution and noise pollution.


3. Atmospheric Environmental Pollution and Control

1. “Atmospheric Environmental Research: Critical Decisions Between Technological Progress and Preservation of Nature” by Detlev Möller

“Atmospheric Environmental Research: Critical Decisions Between Technological Progress and Preservation of Nature” Book Review: This book provides knowledge on the impact of chemical components of the environment on climate and global chemistry. This book includes knowledge of forest damage and is summarized as an instance of atmospheric impact on the environment. This book mainly focuses on the issues of tropical environments such as acid rain, global warming, ozone depletion, physical and chemical state of the environment and also written in a student-friendly way which makes students understand each topic clearly. This book is especially for those who want to have knowledge about our environmental issues and impact of atmospheric changes.

2. “Introduction to the Scientific Study of Atmospheric Pollution” by Billy McCormac

“Introduction to the Scientific Study of Atmospheric Pollution” Book Review: This book gives different perspectives of atmospheric pollution on an introductory level. This book is written to provide a scientific introduction to air pollutants for the students who are interested in learning about it. This book is written in simple language for better understanding. It covers topics such as transport and meteorology, sources and sinks of atmospheric pollutants, effects on vegetation, atmospheric chemistry. This book also includes subtopics like surveillance of air quality and human health effects and significance of various pollutants is explained in understandable terms. This book is for the people who are interested in environmental science and study it as a basis for further research as well as leyman and government officials.

3. “Physico-Chemical Behaviour of Atmospheric Pollutants (1989): Air Pollution Research Reports” by G Restelli and G Angeletti

“Physico-Chemical Behaviour of Atmospheric Pollutants (1989): Air Pollution Research Reports” Book Review: This book includes the posters and oral papers that are presented in the conference. This book contains details about the conference that was first held in Italy on Physico-Chemical Behaviour of Atmospheric Pollutants then after ten years a conference was organised in Italy regarding the same where 185 scientists participated and peresented 110 papers. This book covers new issues that arose during those years and the scientific community was concerned about the problems related to the atmosphere. The contents of this book have been organized according to the new structure of the COST 611 project. From this book users will get knowledge about environmental issues, physical and chemical behaviour of atmospheric pollutants.

4. “Atmospheric Pollutants in Forest Areas: Their Deposition and Interception” by H W Georgii

“Atmospheric Pollutants in Forest Areas: Their Deposition and Interception” Book Review: This book included details about a conference on Acid deposition on Atmospheric Pollutants was organized first in Oberursel Taunus in November 1981. Problems related to atmosphere and research on wet and dry deposition of pollutants and on acid precipitation were introduced. So from this volume anyone can get every information related to this conference. It is mainly focused on analyzing pollutants in forest areas and new techniques of sampling. This book provides an understandable knowledge related to the deposition and interception of pollutants in forest atmosphere, interception of fog-droplets by vegetation and composition of fog.

5. “Atmospheric Computations to Assess Acidification in Europe” by J Alcamo and J Bartnicki

“Atmospheric Computations to Assess Acidification in Europe” Book Review: This book is a summary and conclusion of the Warsaw II meeting on Atmospheric computation to assess acidification in Europe. In this summary the subjects that are reviewed are sensitivity/uncertainty analysis of long range transport models, Linkage between atmospheric and ecological models, The interface between atmospheric models of different scales. This book is written in a user-friendly way so anyone can understand every topic in this book. This book covers topics such as relationships between primary emissions and regional air quality and acid deposition in eulerian models determined by sensitivity analysis. This book also includes topics like application of the fast method to analyze the sensitivity, uncertainty of a lagrangian model of sulphur transport in europe and application of the ‘Fast’-Method to a long term interregional air pollution model. It also includes coupling air pollution transport models of different scales and climatological variability of sulfur depositions in europe. This book explains the assessment of impacts of possible climate changes on the results of the Iiasa rains sulfur deposition model in Europe, forest canopy transformation of atmospheric deposition.

6. “Physico-Chemical Behaviour of Atmospheric Pollutants” by B Versino and H Ott
7. “Environmental Technologies and Trends: International and Policy Perspectives (Environmental Science and Engineering)” by Ravi K Jain and Yves Aurelle

“Environmental Technologies and Trends: International and Policy Perspectives (Environmental Science and Engineering)” Book Review: This book is mainly focused on technical and scientific areas related to environmental issues. This book covers integrated technical issues, environmental issues related to air pollution, wastage of water. An overview paper for each topic covers the current state of technology. It also focuses on the future trend, outbound technology and on current research activities. This book is also refereed by scientists and engineers. This book also includes an introductory chapter in English and French which provides an overview of important issues discussed in the papers.

8. “Measurement of Atmospheric Emissions” by Heikki Torvela

“Measurement of Atmospheric Emissions” Book Review: This book provides knowledge about greenhouse effects and global warming for which air quality has become poor and this is a major environmental issue. So monitoring and controlling emission into the atmosphere needs to be done. This book includes technologies to control, monitor emission and analysis from energy plants. This book provides knowledge on different emission techniques, physical and chemical basis as well as practical knowledge. It includes topics such as origin of emissions, determination of mass concentration of particulate material, determination of particle size distribution. This book also includes topics like determination of mass emission, measurements of gaseous emission, optical spectroscopy in emission measurements. This book is specially for researchers and engineers who are interested in air pollution control and environmental technology.

9. “Ocean Waves Breaking and Marine Aerosol Fluxes (Atmospheric and Oceanographic Sciences Library)” by Stanislaw R Massel

“Ocean Waves Breaking and Marine Aerosol Fluxes (Atmospheric and Oceanographic Sciences Library)” Book Review: This book is focused on the study of breaking waves and the relationships of breaking rate with marine aerosol fluxes. This book provides theoretical as well as practical experiments which is very helpful for the students. This book includes problems related to energy dissipation, fundamentals of marine aerosols and their generation, estimation of energy loss because of wave breaking. This book is specially for the professional and researchers who are interested in ocean physics and meteorology. This book is also helpful for graduates, postgraduates, engineers, Phd students who want to work in an ocean environment.

10. “Global Atmospheric Change and Public Health” by James C White

“Global Atmospheric Change and Public Health” Book Review: This book is based on the changes in atmosphere globally and its impact on public health. This book provides knowledge about communicable disease, impact on society for health related problems, cancer, immunity, human respiratory problems, nutrition. It is beneficial for the ones who are interested in the study of global climate change and impacts on human health. This book covers topics such as Overview of Global Atmospheric Change, Immune System and Ultraviolet Light, Effects of UVB on Infectious Diseases, Infectious Diseases and Atmospheric Change, Human Nutrition. This book also includes topics like Atmospheric Change, Skin Cancer and Ultraviolet Light: Risk Estimates Due to Ozone Depletion, Atmospheric Change and Temperature-Related Health Effects, Respiratory Effects Associated With Global Climate Change.


4. Air and Noise Pollution Control

1. “Advanced Air and Noise Pollution Control: Volume 2 (Handbook of Environmental Engineering)” by Lawrence K Wang and Norman C Pereira

“Advanced Air and Noise Pollution Control: Volume 2 (Handbook of Environmental Engineering)” Book Review: This book explains how different processes can be combined to solve air, noise, and thermal pollution problems. It covers technical and economic evaluations. The book describes the principles behind the design and other new designs which are beneficial for the practicing engineers. The focus on engineering solutions from principles of physics, chemistry and maths. Various references, cost data, design methods and installation are included in the book. It also mentions the operations of air pollution control process equipment and best available technologies for air thermal and noise pollution control.

2. “Textbook of Noise Pollution and Its Control” by S C Bhatia

“Textbook of Noise Pollution and Its Control” Book Review: This book covers basic concepts on noise, its effects and control in industrial and non-industrial sources. This book mentions the use of silencers, mufflers, shields, barriers and improvement in the design of machinery. These are important engineering approaches. The control measures of noise in industries namely paper, mining, food processing, metal, rubber and plastics are covered in this book. Different instruments for noise analysis are included. This book highlights the measures which are taken to control noise pollution. It also describes some general awareness like education through the media and cooperating with environmental authorities. This book will act as an excellent reference for students concerned with environmental degradation. It is also beneficial for the researchers of environmental sciences.

3. “Air and Noise Pollution Control: Volume 1: 001 (Handbook of Environmental Engineering)” by Lawrence K Wang and Norman C Pereira

“Air and Noise Pollution Control: Volume 1: 001 (Handbook of Environmental Engineering)” Book Review: This book describes how serious is the pollution and what kind of technology can prevent pollution from hampering our lives. It also explains how the cost of abatement justifies the degree of abatement. It also includes different kinds of pollution and its degrading effects. Demands for zero discharge and converting pollution into noxious form are included in the book. The book mentions traditional approaches of true solutions regarding specific pollution problems. This has been the success of environmental engineering. This book also highlights the methodology of pollution control.

4. “Noise Control Manual: Guidelines for Problem-Solving in the Industrial / Commercial Acoustical Environment” by David A Harris

“Noise Control Manual: Guidelines for Problem-Solving in the Industrial / Commercial Acoustical Environment” Book Review: This book discusses noise pollution having adverse effects in our environment. Noise effects cause fatigue and loss of productivity. It discusses that noise pollution is almost everywhere like schools, hospitals. High level noise in factories causes speech communication. This book explains that noise pollution can cause hearing problems. The book also sets an example why foremen are unable to hear warning shouts. The book mentions noise pollution as a kind of distraction to many occupants, impairment of speech communication and lack of speech privacy.

5. “Sound Analysis and Noise Control” by John Foreman

“Sound Analysis and Noise Control” Book Review: This book introduces fundamental concepts of sounding and rating of sound. It covers age related and noise induced hearing loss. This text provides the fundamentals of sound, generation, propagation and measurement. There is a section on the newest and most valu­ed application of fundamentals to sound control which is present in the book. It contains tools in noise study and intensity. Noise control and measurement of sound intensity is contained in this book. This book deals with physics, instrumentation and limitations of sound.

6. “Air Pollution Control” by S P Mahajan and T V Ramachandra

“Air Pollution Control” Book Review: This book mentions the causes of air pollution like increasing traffic, growing cities, rapid economic development and industrialisation. It also describes the issues of air pollution, its characteristics and concentrations. It also includes effects on human health and ecology.

7. “AMIE Air Pollution and its control CV 423 Solved Paper” by Jain Brother

“AMIE Air Pollution and its control CV 423 Solved Paper” Book Review: This book includes solved papers on AMIE air pollution and its control.

8. “Air Pollution Control Technology Handbook (Mechanical Engineering)” by Karl B Schnelle Jr and Charles A Brown

“Air Pollution Control Technology Handbook (Mechanical Engineering)” Book Review: This book covers information on air pollution control technology. This book includes environmental regulations, process design, cost of air pollution control and various methods for designing equipment for control of gaseous pollutants. It explains how to examine equipment proposals from vendors and how to select control methods. This book acts as a guide for practicing engineers who are engaged in process engineering, cost estimation and design of air pollution control systems. The methods are described in full detail so that the readers can apply the process in detail and proceed further.

9. “Air Pollution Control Engineering” by Noel De Nevers

“Air Pollution Control Engineering” Book Review: This book highlights the complete air pollution field from an engineering point of view. Topics like control devices and its theory are mentioned in the book. It provides magnitudes of important quantities to help the students. Different practical applications and theoretical treatments are presented in this book. This text discusses topics on pollution effects, the structure of U.S. air pollution law and atmospheric models.

10. “Air Pollution Control Technology Handbook” by Karl B Schnelle Jr and Russell F Dunn

“Air Pollution Control Technology Handbook” Book Review: This book highlights the air pollution control system and process engineering. It covers the techniques and equations used for air pollution control. This book acts as a reference for engineering or science background students. Topics on methods for designing control equipment, equipment proposals from vendors and major advances in the field are discussed in the book. The book also describes the strategy for identifying the most cost-effective design. It also provides new legislation, air regulation and advances in process integration design techniques. It also acts as a guide for industry professionals. A basic introduction to air pollution control equipment design and air pollution control processes are highlighted in this book.

5. “Heterogeneous and Liquid Phase Processes: Laboratory Studies Related to Aerosols and Clouds: Volume 2 (Transport and Chemical Transformation of Pollutants in the Troposphere)” by P Mirabel and G A Salmon

“Heterogeneous and Liquid Phase Processes: Laboratory Studies Related to Aerosols and Clouds: Volume 2 (Transport and Chemical Transformation of Pollutants in the Troposphere)” Book Review: This book presents recent advances in the field, including photochemical and free radical reactions in cloud droplets. It has reaction mechanisms for the oxidation of sulfur(IV) by ozone and hydrogen peroxide. It explains the role of transition metal ions in aqueous oxidation. Also, the exchange of pollutants between air and cloud droplets, and some studies of aerosol surface reactions and photocatalysis is included.

11. “Air Pollution by Photochemical Oxidants: Formation, Transport, Control, and Effects on Plants (Ecological Studies)” by Robert Guderian and K H Becker


5. Air Pollution Control and Design of Equipment

1. “Air Pollution Control: A Design Approach” by C David Cooper and F C Alley

“Air Pollution Control: A Design Approach” Book Review: This book introduces the causes, sources, effects and regulations of air pollution. It covers the philosophy of design and economic analysis for control of air pollution. This book is beneficial for the engineers. Different diagrams, chapter exercises, examples, key points and design techniques are mentioned in this book. This text includes a new section on photochemical smog formation and air quality trends. There is also a section on capital and operating costs.

2. “Air Pollution Control Equipment: Selection, Design, Operation and Maintenance (Environmental Science and Engineering)” by Louis Theodore and Anthony J Buonicore

“Air Pollution Control Equipment: Selection, Design, Operation and Maintenance (Environmental Science and Engineering)” Book Review: This book is written on various control devices. Reducing maintenance cost and deterioration of collector perform­ance are included in the book. Operation and maintenance topics are discussed in this book. It also includes problems with air pollution control equipment. This book focuses on factors that have a major impact on maintenance problems of control devices.

3. “Encyclopaedia of Air Pollution Control Equipments: Selection, Design, Operation and Maintenance” by Frederick W Lipfert and Litao Wang Hsiaolan Liu
4. “Fundamentals of Air Quality Systems: Design of Air Pollution Control Devices” by Kenneth E Noll

“Fundamentals of Air Quality Systems: Design of Air Pollution Control Devices” Book Review: This book discusses the rational bases for the design of air pollution control devices. It also includes removal of gases and emissions from industrial sources. The book focuses on the aspects of design and state of the art procedures for air pollution control systems. It explains the theory of each design system and its philosophy. The book covers topics like cyclones, fabric filters, wet scrubbers, absorption and incineration. This text is suitable for undergraduate and graduate students in environment, chemical, civil and mechanical engineering.

5. “Process Engineering and Design for Air Pollution Control” by Jaime Benitez

“Process Engineering and Design for Air Pollution Control” Book Review: This book comprises general methodology for process engineering. It also introduces designs to solve air pollution control problems. Optimization techniques, cost estimation methodology and control of gaseous pollutants are discussed in this book. It covers information based on emissions and nitrogen oxides, design of fabric filters, flue gas desulfurization systems and control of matter emissions. The chemical engineers will be benefited from this book to get solutions to air pollution control engineering problems.

6. “Air Pollution Control Engineering (Handbook of Environmental Engineering)” by Norman C Pereira and Yung-Tse Hung

“Air Pollution Control Engineering (Handbook of Environmental Engineering)” Book Review: This book acts as a guide for educators and practicing professionals. The book discusses the principles and practice of the control process for practicing engineers. It mentions the performance potential and limitations of the major control processes. Fabric filtration, cyclones, electrostatic precipitation, dry scrubbing, and condensation are included in this book. The book contains additional chapters on topics like flare processes, thermal oxidation and catalytic oxidation. Gas phase activated carbon adsorption and gas-phase biofiltration are mentioned in this book. There are best available technologies for air pollution control. It also covers various examples, theoretical explanations, and engineering methods for the design and operation of air pollution equipment. Many numerous calculations are also present in this book.

7. “Catalytic Air Pollution Control: Commercial Technology” by Ronald M Heck and Robert J Farrauto

“Catalytic Air Pollution Control: Commercial Technology” Book Review: This book discusses use of catalysis for solving real world environmental problems. It acts as a reference for scientists and engineers and gives them a “nuts and bolts” view of the most important catalytic technologies. Topics like catalytic processes, characterization, kinetics and deactivation of commercial catalysts are covered in this book. It also includes emissions from gasoline and diesel exhausts
ozone inside flying aircraft. Different organic emissions, power generation stations, hydrocarbons and carbon monoxide from power plants are highlighted in this book. Rich and lean burn stationary engines are also mentioned. This book is suitable for the people who are investigating how to abate harmful emissions for compliance with environmental regulations.

8. “Air Pollution: Volume 4 (The Handbook of Environmental Chemistry)” by C Gries and F Lipfert

“Air Pollution: Volume 4 (The Handbook of Environmental Chemistry)” Book Review: This book introduces various aspects of chemistry and chemical reactions in the environment. The book explains the chemical industry producing 150 million tons of synthetic chemicals. Mining operations, geophysical modifications, large quantities of inorganic and organic materials are mentioned in this book. It also discusses the chemical and waste products released during production, storage and transport. This leads to a natural cycle and disturbs the natural system.


6. Industrial Pollution Control Engineering

1. “Industrial Combustion Pollution and Control” by Charles E Baukal Jr

“Industrial Combustion Pollution and Control” Book Review: This book is written for engineers and people looking for information about industrial combustion pollution and control. This book contains experimental techniques, simulation strategies, and practical applications. It also provides information on the control of pollutants generated by combustion processes in the metals, minerals, chemical, petrochemical, waste, incineration, paper, glass, and foods industries. This book has more than 1300 references and 750 tables along with figures and illustrations for better understanding.

2. “Biomass for Sustainable Applications: Pollution Remediation and Energy (Green Chemistry Series)” by Venkata Mohan and Hisao Yoshida

“Biomass for Sustainable Applications: Pollution Remediation and Energy (Green Chemistry Series)” Book Review: This book is written for policy makers and local officers. It is also useful to chemical engineers and environmental scientists in both academia and industry. This is a two-volume set that examines the potential use of biomass as both a source of sustainable energy and a resource to tackle contaminated soils and wastewaters. Topics like non-food crops, bacteria and fungi as sources of biomass are also included in this book. This book also has many example scenarios for better understanding.

3. “Electrospinning for Adv Energy and engineering applications” by sara

“Electrospinning for Adv Energy and engineering applications” Book Review: This book is written for both the field newcomers and experts. This book provides elaborate information on the use of electrospun fibers in energy conversion and storage, as well as in environmental sensing and remediation. The author also writes about electrospinning technique and its origins. Discussions on the use of electrospun materials in energy devices like hydrogen storage, dye-sensitized solar cells, lithium-ion batteries, and supercapacitors are also included. Many environmental applications of electrospun fibers are also included.

4. “Handbook of Chemical Engineering Calculations, Fourth Edition (Mechanical Engineering)” by Tyler G Hicks and Nicholas P Chopey

“Handbook of Chemical Engineering Calculations, Fourth Edition (Mechanical Engineering)” Book Review: This book is written for both the field newcomers and experts. It is also useful for practicing engineers. Topics like stoichiometry, phase equilibrium and physical and chemical properties are elaborately explained in this book. Other topics like head transfer, distillation, filtration, air pollution control and many more are also included in this book. This book also contains worked-out numerical procedures for better understanding. New calculations covering the latest green technologies and environmental engineering standards are included in this book.

5. “Storm Water Pollution Control: Municipal, Industrial and Construction NPDES Compliance” by Roy D Dodson
6. “Handbook of Air Pollution Prevention and Control” by Cheremisinoff Consulting Engineer

“Handbook of Air Pollution Prevention and Control” Book Review: This book is written for both the field newcomers and experts. Information about the latest technologies for managing industrial air pollution in petrochemical, oil and gas, and allied industries is included in this book. The author provides detailed explanations on topics like equipment selection, sizing, and troubleshooting. Practical design methodology is also included. Other topics like energy-efficient technologies, implementing environmental cost accounting measures are also included in this book.

7. “Process Engineering for Pollution Control and Waste Minimization” by Donald L Wise
8. “Phenolic Resins: Chemistry, Applications and Performance” by Volker Böhmer and Louis A Pilato
9. “Special Types of Life Cycle Assessment (LCA Compendium – The Complete World of Life Cycle Assessment)” by Matthias Finkbeiner


7. Automotive Pollution and Control

1. “Fuels and Pollution Control (Automobile Pollution Control Engineering)” by R B Gupta

“Fuels and Pollution Control (Automobile Pollution Control Engineering)” Book Review: This book contains an in-depth overview of pollution control systems in automobiles. It describes the working of these systems in different kinds of automotive systems. Various aspects of automobile pollution control engineering are discussed in the book. It is designed for practising automotive engineers. Also useful for postgraduate and undergraduate students of related engineering courses. The illustrations related to the topic are provided that helps in a better understanding of the subject. Technical know-how is also explained with the help of step-by-step procedures and diagrams. The short answer questions and multiple choice questions help the readers to test their understanding of the subject matter.

2. “Automobile Catalytic Converters” by Kathleen C Taylor

“Automobile Catalytic Converters” Book Review: This book is a comprehensive guide to the automotive catalytic converter technology that is used for the purification of automotive exhaust gases. In the beginning, it describes how this process of purification of gases is required in today’s world for the purpose of preservation of the environment. The contents of the book are emission regulations in the United States, exhaust emission characteristics, emission control technology, converters, control system, catalyst Screening, laboratory testing and other related topics. The book is useful for automotive engineers working in the field of catalytic converters, researchers and students of the related subject. The questions given at the end of each chapter help the students to test their understanding of the subject. The application based examples provide a practice-oriented approach to the readers.

3. “Catalytic Air Pollution Control: Commercial Technology” by Ronald M Heck and Robert J Farrauto

“Catalytic Air Pollution Control: Commercial Technology” Book Review: This book offers a detailed account of various kinds of modern catalytic technology. It focuses on commercial technology as the primary source for commercial catalytic air pollution control technology. It covers all the new advances in technology in automotive catalyst control technology and diesel engine catalyst control technology. Small engine catalyst control technology and alternate sustainable fuels for auto and diesel have also been discussed in detail. The book provides a blend of theoretical and application based understandinding. It is useful for engineers working in commercial technology and students in automotive engineering courses.

4. “Automobiles and Pollution” by Paul Degobert and Nissim Marshall

“Automobiles and Pollution” Book Review: This book explores the impact of automobile emissions on air pollution. It focuses mainly on the share of pollution that can actually be attributed to the use of vehicles. After general information on atmospheric pollution, the book’s focus then shifts to a more in-depth analysis of how pollutants can be eliminated from car exhaust emissions. In its fourteen chapters the book covers characterization of air pollution, an inventory of air pollutants, air pollution and health, air pollution and the environment laws and regulation, and other related topics. The book is intended for automotive engineers working with the pollution control in automobiles and students studying automotive engineering.

5. “A report on automobile fuel economy” by United States. Environmental Protection Agency

“A report on automobile fuel economy” Book Review: This book focuses on the ongoing efforts to reduce fuel consumption. The factors described in the book responsible for this reduction are increased engine performance, reduced friction, use of lightweight materials, and reduced aerodynamic drag. The results of experiments assessing the various factors affecting fuel economy have been described in the book. This provides a practical understanding of the subject along with theoretical knowledge. It summarizes many of the state-of-the-art theories and data, and provides extensive lists of references to the readers. It is useful for specialists and practicing engineers interested in the fuel economy of automobiles.

6. “How to Use Automotive Diagnostic Scanners” by Tracy Martin

“How to Use Automotive Diagnostic Scanners” Book Review: This book helps to understand how to choose the right scanner so that it would work effectively on modern cars. It teaches the readers how these scanners can be used to diagnose operational faults. The book also examines the working of these scanners so that they can be used as low-budget data acquisition systems and dynamometers, so that the performance of vehicles can be maximized. It is illustrated with photos and diagrams to help the readers understand OBD-I and OBD-II systems. Also includes a comprehensive list of codes and what they mean. The book is useful for practising automotive engineers and students.

7. “Air Pollution, the Automobile, and Public Health” by The Health Effects Institute and National Academy of Sciences

“Air Pollution, the Automobile, and Public Health” Book Review: This book provides a comprehensive study of atmospheric exposure and the biological effects of toxic substances emitted by automobiles. It examines what is known and not known about the human health risks of automotive emissions. The book combines scientific and institutional learning that helps the readers to understand the subject theoretically as well as practically. The book covers topics related to air pollution and studies in-depth how the pollution emitted by automobiles affect public health and what can be done to reduce this effect. The book is useful for automotive engineers working with reducing the air pollution caused by automobiles. It will also benefit students and researchers.

8. “Automotive Fuel and Emissions Control Systems (Professional Technician)” by James D Halderman and James Linder

“Automotive Fuel and Emission Control Systems, Third Edition” Book Review: This book is designed to include the topics covered in the NATEF program. This comprehensive text covers all aspects of automotive fuel and emissions. It emphasizes diagnosis and troubleshooting, and features tech tips and diagnostic stories throughout. This provides the readers with a practical understanding of the subject matter. The book covers topics such as engine performance (ASE A8 content area) and the advanced engine performance (L1) ASE. By combining these two complementary subjects into one comprehensive textbook, the readers are able to get a thorough understanding of the subject in just one book. It is designed for automotive engineers, researchers and students.

9. “Automobile Pollution: Concern, Priorities and Challenges – a Collection of 21 Papers” by S K Agarwal

“Automobile Pollution: Concern, Priorities and Challenges – a Collection of 21 Papers” Book Review: This book presents a state-of-the-art review of automobile pollution and standards and regulations. It covers the two principal international systems of vehicle emission standards: those of North America and Europe. An evaluation of measures for controlling emissions from in-use vehicles is also given in the book. It also describes the role of fuels in reducing vehicle emissions. After that the benefits that could be gained by reformulating conventional fuels and the potential benefits of alternative cleaner fuels are also included. The book will benefit automotive engineers interested in learning technologies related to cleaner fuels for vehicles. The research included in the book provides a practical knowledge of the subject to readers.

People who are searching for Free downloads of books and free pdf copies of these books on Pollution Control – we would like to mention that we don’t have free downloadable pdf copies of these good books and one should look for free pdf copies from these Authors only if they have explicitly made it free to download and read them.

We have created a collection of best reference books on “Pollution Control” so that one can readily see the list of top books on “Pollution Control” and buy the books either online or offline.

If any more book needs to be added to the list of best books on Pollution Control subject, please let us know.

advertisement
advertisement
Subscribe to our Newsletters (Subject-wise). Participate in the Sanfoundry Certification contest to get free Certificate of Merit. Join our social networks below and stay updated with latest contests, videos, internships and jobs!

Youtube | Telegram | LinkedIn | Instagram | Facebook | Twitter | Pinterest
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & technical discussions at Telegram SanfoundryClasses.