80 Best Books on Fluid Mechanics

Book Review: This is the most highly followed textbook in the field of fluid mechanics. The book provides a balanced and competitive approach to learn the major critical concepts in the field of fluid dynamics. The book also provides problem solving approaches that help the readers to trace out the correct solution thereby linking the results to correct physical behavior. The book also contains numerous examples as well as problems at the end of every chapter.

Book Review: This book provides a solid understanding of fluid dynamics. The book also helps in solving problems that occur in various fields like biochemical, chemical, mining, petroleum, polymer and waste management industries. The book covers recent advancements made in the field of microfluidics, computational fluid dynamics and also addresses problems that occur in turbulent mixing and recirculating flows. The book also contains chapters on macroscopic fluid mechanics, hydrostatics, mass, energy and momentum laws and many more.

Book Review: This book provides an application based foundation to process fluid dynamics. The book contains chapters on differential equations of fluid dynamics, viscous flow problems like polymer processing, porous media flows, turbulent flows, bubble motion, microfluids, electrophoresis, COMSOL multiphysics and many more. The book is known for its innovative research and advanced concepts coverage. This book is useful to students studying in all the streams of engineering who deal with fluid dynamics.

Book Review: This is a very good textbook on fluid dynamics for students of all streams who deal with fluid flow phenomena and its modeling. The book enables the students to give more importance to basics of physical concepts by not focusing on mathematical concepts in detail. The book contains chapters on euler acceleration formula, Reynolds transport theorem, Bernoulli equation and many more approximations. The book illustrates the applications with the help of solved numericals .

Book Review: This book covers detailed information about heat transfer, dimensional analysis basics, polymer flow concepts, discussions on convective momentum, energy transport, mass transport, two phase system transport and many more. The book provides a perfect balance between transport phenomena basics and this is the major reason for the success of the book. The book also corrects all the errors that had occurred in the previous editions so far.

“Development of Pump and Pipe Flow Laboratory” Book Review: The book explains the development of a cost-effective laboratory apparatus. Academicians or students interested in developing a pump flow apparatus can refer to this book. Two systems are covered in the book. First system consisting of a pump with interchangeable impellers and several other essential parts required in the design. Another system deals with separate pipes with pipe networks used to simultaneously employ series and parallel operation. The book also describes Venturi flow meters, a rotameter, pressure tappings and U-tube manometers.

“Computational Fluid Dynamics for the Petrochemical Process Industry” Book Review: The book describes concepts of computational dynamics from a petrochemical industrial standpoint. It can be accessed by researchers and scientists of the field. The book contains a total of 10 chapters. Initial chapters entail concepts of CFD in research, modelling turbulence, monte carlo PDF method. Subsequent chapters dwell into particle-laden turbulent flows, hydrodynamic scaling, stability analysis. The last section of the book deals with flow computation with lattice gases, large eddy simulation of turbulence. Other concepts covered include numerical analysis of states of fluid flow, separated flow modelling, interfacial transport phenomena.

“Polymer Melt Processing: Foundations In Fluid Mechanics and Heat Transfer” Book Review: The book covers all the vital topics of polymer melt processing. It is suitable for advanced undergraduate or graduate level students studying polymer processing. Fluid mechanics and heat transfer concepts on which polymer melt processing is built are elucidated. It is written in an easily comprehensible manner.

“Computational Fluid Mechanics And Heat Transfer” Book Review: The book lays the foundation for solving problems related to fluid mechanics and heat transfers. It is recommended to students of undergraduate and graduate level courses in the field. The book is divided into two parts. The first part of the book focuses on providing the concepts and preliminary knowledge required to understand and solve the fluid equations and problems illustrated in the second part. Concepts covered include: turbulence, large-eddy simulation (LES), detached-eddy simulation (DES) and direct numerical simulation (DNS). Along with theoretical portions it also covers the applications of it. Solved examples and questions with answers are also covered in this book.

“Vortex Processes and Solid Body Dynamics: The Dynamic Problems of Spacecrafts and Magnetic Levitation Systems” Book Review: The book presents concepts of vortex fluid and body dynamics and their applications extended to various flying vehicles. It is recommended to researchers or scientists as well as practitioners involved in the field of aviation. The book consists of a total of 9 chapters. The book begins by an introduction before diving into mathematical models, analytical and numerical methods of dynamics investigation. Further, the book elucidates concepts of eddy currents, vortex motions of liquid, dynamics problems for various aircrafts.

“Hydraulics and Fluid Mechanics” Book Review: This book is a detailed study of SI units in hydraulics and fluid mechanics. It starts with basic concepts that include properties of fluids, fluid pressure and its measurements, hydrostatic forces on surfaces, buoyancy and floatation etc. Then it goes on to include separate chapters on the flow of fluids such as flow through orifices and mouthpieces, flow over notches and weirs etc. The book also covers some technical topics such as impact of free jets, hydraulic turbines, reciprocating pumps, centrifugal pumps etc. In addition, it contains several questions from previous year university and competition exams that makes the book important for students preparing for engineering services, AMIE and ICS exams.

“A Textbook of Fluid Mechanics and Hydraulic Machinery” Book Review: This book covers many important topics related to fluid mechanics and hydraulic machinery. In the beginning it describes properties of fluids, pressure and its measurement, hydrostatic forces on surfaces, buoyancy and floatation and other basic topics. Then it goes on to include separate chapters on kinematics of flow and ideal flow, dynamics of fluid flow, viscous flow , turbulent flow and flow through pipes. At last objective type questions are given for the students to test their understanding of the subject matter. The diagrams and pictures help in technical understanding of the subject. The book is useful for students preparing for competitive examinations and for those studying civil engineering at colleges.

“Fluid Mechanics through Problems” Book Review: This book introduces the readers to the important subject of fluid mechanics. The seventeen chapters of the book include topics like Fluid Properties, Dynamics, Dimensional Analysis, Kinematics, Laminar Flow, Turbulent Flow etc. The book describes properties of fluids along with their kinematics of flow with the help of topics such as fluid statics, Bernoulli’s theorem, equation of motion and momentum equation. It explains the principles of fluid mechanics in a more practical manner with the application of these principles in solving engineering problems. The topics are illustrated with diagrams and pictures to help the students understand the subject clearly. The book is designed for undergraduate and graduate students studying fluid mechanics in an engineering course.

“Hydraulics and Fluid Mechanics Including Hydraulics Machines” Book Review: This book is meant for all engineering branches, competitive examinations such as ICS and AMIE. This book is a detailed study of SI units in hydraulics and fluid mechanics. It starts with basic concepts that include properties of fluids, fluid pressure and its measurements, hydrostatic forces on surfaces, buoyancy and floatation etc. Then it goes on to include separate chapters on the flow of fluids such as flow through orifices and mouthpieces, flow over notches and weirs etc. The book also covers some technical topics such as impact of free jets, hydraulic turbines, reciprocating pumps, centrifugal pumps etc. In addition, it contains several questions from previous year university and competition exams that makes the book important for students preparing for engineering services, AMIE and ICS exams. Standard International Units have been used for the entire book. An appendix containing computer programs to solve problems of uniform and critical flows in open channels has been given. Over 200 multiple choice questions and answers have been provided for practice. Several problems from the latest question papers of the different Universities as well as competitive examinations have been incorporated.

“Fluid Mechanics: Including Hydraulic Machines” Book Review: This book contains a comprehensive coverage of fluid mechanics and hydraulic machinery. The seventeen chapters deal with basic concepts of fluid mechanics and other important aspects of fluids. The topics are explained with the help of illustrations, pictures, diagrams that help the students understand the subject in a practice-oriented manner. The objective type questions and questions from previous year examinations help the students prepare for university and competitive exams.

“Textbook of Fluid Mechanics and Hydraulic Machines” Book Review: The book is suitable for students of civil engineering, aerospace engineering, biological engineering, and others. This book contains a detailed coverage of important topics in hydraulic machines. In the beginning it includes topics such as turbines, centrifugal and reciprocating pumps. Then it goes on to describe miscellaneous hydraulic machines such as hydraulic press, accumulator, intensifier, ram, lift and crane. A detailed discussion on kinematics and dynamics of Fluid Flow, laminar, turbulent and compressible flow is also included in the book. It contains 600 solved examples, 365 numerical problems along with other questions to help the students prepare for examinations and test their understanding of the subject. Theoretical explanations and mathematical derivations are included along with illustrations to make the learning easier. The book will benefit students of engineering subjects and those who wish to appear in different competitive exams. Theoretical explanations and mathematical derivations have been supported with well-labeled and clear figures.

“Fluid Mechanics and Hydraulics (Schaum’s Outline Series)” Book Review: This book covers all the important aspects of fluid mechanics. It includes 622 fully solved problems to help the readers understand the subject in a clear and concise manner. The book contains a detailed description of Introduction to Fluid Dynamics, Introduction to Hydraulics, Fluid Mechanics, Statics and Mechanics of Materials. In addition, it contains detailed explanations of free-body analysis, vector diagrams, the principles of work and energy and impulse momentum and Newton’s laws of motion. Separate chapters on fluid statics and the flow of compressible fluids are also included. The practical examples of proofs of theorems and derivations of formulas help in a thorough understanding of the subject. The book is a useful learning source for students in engineering courses and for those appearing for competition exams.

“Fluid Mechanics: Hydraulics” Book Review: This book covers many important topics related to fluid mechanics and hydraulic machinery. In the beginning it describes properties of fluids, pressure and its measurement, hydrostatic forces on surfaces, buoyancy and floatation and other basic topics. Then it goes on to include separate chapters on kinematics of flow and ideal flow, dynamics of fluid flow, viscous flow , turbulent flow and flow through pipes. At last objective type questions are given for the students to test their understanding of the subject matter. The diagrams and pictures help in technical understanding of the subject. The book is useful for students preparing for competitive examinations and for those studying civil engineering at colleges.

“Fluid Mechanics and Hydraulic Machines” Book Review: This book provides a detailed understanding of basic concepts and methods of fluid mechanics and hydraulic machines. The sixteen chapters of this book include conceptual aspects of fluid mechanics and the application based working of hydraulic machines. It comes with a set of theoretical questions and numerical problems at the end of each chapter. The summary present at the end of each chapter highlights the key points and examples help in application based understanding of fluid mechanics. The book also includes previous year questions from competition exams that help the students in preparing for these exams. It will be useful for the undergraduate students of civil, mechanical, chemical and aeronautical engineering.

“Fluid Mechanics and Hydraulic Machines Lab Manual” Book Review: This book provides a basic knowledge of fluid mechanics and machinery. It focuses on problems involving flow of fluids in aerodynamics, force of fluid on structural surfaces and fluid transport. The aim of this lab manual is to help the students understand how to apply scientific knowledge to find solutions for problems of practical importance. The experiments are explained in a step-by-step manner with diagrams and well-labelled pictures to make the learning experience more convenient for students. The manual is designed for students in degree courses in Mechanical, Chemical, and Electrical and Electronics Engineering.

“Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction (Fluid Mechanics and Its Applications)” Book Review: This book talks about the treatment of the cavitation erosion phenomenon and state-of-the-art research in the field. It consists of 2 parts where one part gives knowledge about the computational and experimental approaches to cavitation erosion, the facilities and measurement techniques commonly used, presentation of various stages of cavitation damage (including incubation and mass loss) and the contribution of computational methods to the analysis of both fluid and material behavior which is based on a detailed description of impact loads generated by collapsing cavitation bubbles and a physical analysis of the material response to these loads. The second part of this book has a selection of nine papers presented at the International Workshop on Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction (Grenoble, France, 1-2 March 2011). Innovative numerical and experimental investigation illustrations are available in this book. This book is useful for those interested in the field of fluid mechanics and cavitation erosion.

“Dynamics of Droplets (Experimental Fluid Mechanics)” Book Review: This book discusses the dynamical behaviour of single droplets and regular droplet systems. The different experimental facilities and methods necessary for the investigation of single droplets are described in detail. The language in this book is simple and a summary of important applications is given for deeper understanding. This book is useful for those in the field of fluid mechanics and experimental researchers.

Book Review: This book provides a structured introduction in the field of fluid mechanics and helps the students in upgrading their mathematical skills along with the fundamentals of fluid mechanics. The book also demonstrates fluid mechanics problems in precise mathematical language. The book carefully defines each problem, treats the physical aspects of problems thereby visualizing the things and their working in real world and finally represents the physical model by appropriate mathematical symbols and operators. The book also contains numerous problems that demonstrate problem solving techniques. This book is very suitable for students and engineers involved in the field of fluid mechanics.

Book Review: This book stresses the importance of the basic understanding of various principles of fluid mechanics thereby covering important topics in complete depth. The book deals with all the streams of engineering that require fluid mechanics. The book also links the theory and practice with very good examples and computer science. The book performs three types of calculations they are simple calculations, calculations meant to provide solutions for steady state system operations and unsteady flow simulations.

“Fluid Mechanics” Book Review: This is a brief account of theory aspects of the subject. This book is for students of American Universities. It can be used by first and second year graduates. Meteorology, physics and engineering students may benefit from it. The book has 10 chapters and two appendices. Chapters are Fundamentals and Basic Equations. General Theorems for the Flow of an Inviscid Fluid are also given. Irrotational Flows of an Inviscid Fluid of Constant Density is described. It also describes Waves in an Incompressible Fluid and The Dynamics of Inviscid Compressible Fluids. Effects of Viscosity and Heat Transfer and Boundary Layers of a Gas are described. Hydrodynamic Stability and Turbulence are also included.

“Fluid Mechanics” Book Review: This book is useful for civil and mechanical engineering students. Students can learn about the fundamental principles of fluid mechanics in depth by reading this book. All engineering disciplines that require fluid mechanics can use this book to learn more about it. This book contains examples to show the link between theories and practical concepts. Computer programs are present in this book to allow students to perform calculations. You can perform simple calculations using the programs. This book provides solutions to the steady-state system and unsteady flow simulation.

“Flows and Chemical Reactions in Homogeneous Mixtures (Fluid Mechanics)” Book Review: This book provides information about dimensional analysis, statistical thermodynamics with coupling between internal modes and chemical reactions. It also consists of topics like apparition and damping of fluid turbulence as well as its statistical processing, bifurcations, flames in a confined medium and diffusion. This flow with chemical reactions can occur in various fields such as combustion, process engineering, aeronautics, the atmospheric environment and aquatics. The book includes examples on applications based on homogeneous reactive mixtures that can occur in propellers within the fields of process engineering and combustion.

“Fluid Mechanics and Hydraulic Machines” Book Review: This book is designed for undergraduate civil and mechanical engineering students. This book explains the fundamentals of fluid and hydraulic machines. It also contains the properties of fluids, pressure measurement, hydrostatic forces on surfaces, buoyancy and floatation. It also includes fluid kinematics, fluid dynamics, dimensional and model analysis, laminar flow, turbulent flow and boundary layer theory. This book also discusses the impact of free jets, hydraulic turbines, centrifugal pumps, reciprocating pumps and water power development. This book also contains frequently asked university questions with solutions for enhanced learning.

“Engineering Fluid Mechanics” Book Review: This book is apt for undergraduate civil and mechanical engineering students. This book contains the fundamentals of fluid mechanics. It also contains the topics of fluid statistics, kinematics and dynamics, measurements. It also discusses the laminar flow, boundary layer flow, flow around immersed bodies, flow through pipes, flow through open channels, compressible flow dimensional analysis and similitude. This book also contains multiple choice questions with answers and tutorial problems at the end of each chapter to provide practical knowledge to students.

“Fluid Mechanics and Machinery” Book Review: This book is useful for undergraduate mechanical engineering students. This book contains properties of fluids, mass density, specific weight, volume and gravity, viscosity and vapor pressure. It includes surface tension, capillarity, hydraulic and energy gradient. It also briefs on laminar flow, welsbach equation, friction factor, moody diagram, commercial pipes and minor losses. It also discusses the methods of dimensional analysis, similitude, euler’s equation, velocity triangles, centrifugal pumps and pelton wheel. This book also contains multiple choice questions with answers and tutorial problems at the end of each chapter to provide practical knowledge to students.

“Fluid Mechanics” Book Review: This book is beneficial for undergraduate mechanical engineering students. This book explains the concept of the continuum and kinematics. It also explains the fundamental laws of continuum mechanics, constitutive relations for fluids, equations of motion for particular fluids and hydrostatics. This book deeply explains the concepts of laminar flow, supersonic flow, stream filament theory, potential flow, creeping flows and boundary layer theory. It also contains a wide variety of descriptive type problems, illustrations and real life application for enhanced learning.

“Fluid Machinery: Application, Selection, and Design” Book Review: This book is a guide for undergraduate mechanical engineering students. This book explains the fundamentals of flow in turbomachinery. This book also contains dimensional analysis and similarity for turbomachinery, scaling laws, limitations, and cavitation. This book also deeply explains the turbomachinery noise, performance estimation, machine selection, and preliminary design. This book also discusses on the velocity diagrams and flow path layout, two-dimensional cascades, quasi-three-dimensional flow and advanced topics in performance and design. It also contains a wide variety of descriptive type problems, illustrations and real life applications for enhanced learning.

“Fluid Power with Applications” Book Review: This book is suitable for undergraduate mechanical engineering students. This book discusses the fundamentals of hydraulic mechanics. This book also contains the physical properties of hydraulic fluids, energy and power in hydraulic systems and frictional losses in hydraulic pipelines. This book also briefly explains the maintenance of hydraulic systems, basic electrical controls for fluid power circuits, fluid logic control systems, advanced electrical controls for fluid power systems and automation studio computer software. It also contains a wide variety of descriptive type problems, illustrations and real life application for enhanced learning.

“Fundamentals of Cavitation (Fluid Mechanics and its Applications)” Book Review: This book is referred by undergraduate mechanical engineering students. This book discusses the fundamentals of cavitation. This book explains the main features of cavitating flows, nuclei and cavitation, the dynamics of spherical bubbles. This book also contains bubbles in a non-symmetrical environment, further insights into bubble physics, supercavitation, and partial cavities. This book also explains the bubbles and cavities on two-dimensional foils, ventilated super cavities, vortex cavitation, shear cavitation and cavitation erosion. It also contains a wide variety of descriptive type problems, illustrations and real life application for enhanced learning.

“Fluid Mechanics and Machinery” Book Review: this book is suggested for undergraduate and postgraduate students of mechanical, civil engineering, electrical, aerospace, chemical and production engineering. The book provides the essential concepts of the mechanics of fluids. This book also explains fluid pressure and its measurements, hydrostatic forces on surfaces, fluid masses subjected to acceleration, buoyancy and flotation. It also briefs on the kinematics fluid dynamics, dynamic similitude, flow through orifices and mouthpieces, flow over notches and weirs. It also explains the open channel flow, potential flow, vortex flow, compressible fluid flow, impact of jet and centrifugal pumps. A large number of solved examples have been provided to help the students grasp the fundamentals and apply them to real-life situations.

“Product Details Computational Methods in Hypersonic Aerodynamics (Fluid Mechanics and Its Applications)” Book Review: This book explains computational methods in hypersonic aerodynamics. Chapters included are nonlinear navier-stokes equations, vibrational excitation, dissociation and recombination. Other topics included are ionization, radiation, nonequilibrium at very high speeds, real gas effects and the effects of high temperature and low density. Methods and techniques are discussed in a detailed manner. This book can be used by mechanical and aerospace engineering students.

“Advances in Fluid Mechanics: Proceedings of a Conference Held at Aachen, March 26–28, 1980 (Lecture Notes in Physics)” Book Review: This book will be of interest to postgraduate students and researchers whose work involves quantum optics, solid state spectroscopy and its applications.Topics dealt with include the interaction of quantum light with trapped atoms and condensed matter; quantum tomography and phase analysis; and many applications of quantum optics from mesoscopic physics to correlation spectroscopy of non-classical states, which are of major importance in understanding the nature of collective excitations in solids.

“Fluid Mechanics” Book Review: This book is focused on students and professors of various undergraduate and graduate courses offered for various streams of engineering. It covers fundamentals in an easy to understand manner. It also covers widespread application of fluid mechanics in space like technology, power plant, geophysics and much more. It pays attention to concepts like laminar boundary layer equations, vector field equations, stream function treatment, computational fluid dynamics and much more. The book contains numerous solved and unsolved examples, diagrams, graphs and theoretical question and answers to enhance knowledge of the reader.

“Fluid Mechanics” Book Review: This book deals with the major aspects of force and displacement of fluids particularly of an object with mass. It is highly recommended for students from Mechanical Engineering, Civil Engineering, M.Sc. physics, and chemical branches. Researchers can refer to this book for concept clarifications. This book focuses on both inward and outward forces of the fluids along with their direction, flow, friction, and waves. The content of the book includes Cartesian Tensors, kinematics, dynamic similarity, turbulence, aerodynamics, and vorticity. Many Figures, illustrations, classifications, and formulae are given for each topic. Numerous solved problems, exercises, short questions, theories, and practice problems are given in each chapter for practice.

“Vectors, Tensors and the Basic Equations of Fluid Mechanics (Dover Books on Mathematics)” Book Review: This book is designed for engineers, physicists. And also for applied mathematicians at advanced undergraduate and graduate levels. It covers Cartesian and general tensors to physical field theories. It includes calculus of partial differentiation and multiple integrations, algebra, and calculus of Cartesian vectors. It also includes subsequent chapters like the kinematics of fluid motion, stress in fluids, equations of motion, and energy in Cartesian coordinates, tensors. Later it focuses on the geometry of surfaces in space, the equations of surface flow, and equations for reacting fluids. It contains a generous number of exercises and diagrams.

“Finite Element Computational Fluid Mechanics” Book Review: This book provides a fundamental overview on the finite-element method. It aims at advanced level undergraduates of engineering and researchers and scientists in fluid mechanics, mechanical and chemical engineering. It derives, develops, and applies finite-element solution methodology directly to the differential equation systems which governs distinct and practical problem classes in fluid mechanics. It is aimed for readers with a basic interest in fluid mechanics. It provides numerous real-world examples to enhance understanding of the reader.

“Springer Handbook of Experimental Fluid Mechanics” Book Review: The book is an updated and revised piece of work featuring latest theory and recent developments in advanced mechanics in fluids. This book discusses the experiments in Fluid Mechanics, Measurement of Primary Quantities, Specific Experimental Approaches, and Analyses and Post-Processing of Data. This book covers experimental methodology and techniques for application purpose. It covers various principles and key concepts of fluid mechanics. The book is an excellent blend of both theoretical as well as practical concepts and therefore describes various experiments in fluid mechanics. The topics like measurement of primary quantities, specific experimental approaches, and analyses and post-processing of data are thoroughly explained. The citations given in the book helps in finding the source of the information and to research more on it. The book delicately focuses students, researchers, professionals, physicists, engineers in the development of fluid mechanics, in industry and in other research institutions.

“Orifice Plates and Venturi Tubes (Experimental Fluid Mechanics)” Book Review: The book aims in introducing the differential-pressure flow measurement underlying orifice plates and venturi tubes. It highlights the importance of ISO standards for orifice plates and Venturi tubes. The book features applications, effects, and consequences of deviations from the standards. The book will be suitable for the students, researchers, professionals, and engineers related to the field of differential pressure meters, orifice plates, and venturi tubes.

“Turbulence (Experimental Fluid Mechanics)” Book Review: This book covers the major problems of turbulence and turbulent processes including physical phenomena, their modeling and their simulation. Illustration of aspects dealing with turbulent flows, averaged equations and kinetic energy budgets is provided in this book. The concept of turbulent viscosity as a closure of the Reynolds stress is introduced. The book is an updated and revised piece of writing featuring the fundamental concepts and basic principles of fluid mechanics as well as turbulence. Wall-bounded flows are presented and aspects specific to boundary layers and channel or pipe flows are also pointed out. Free shear flows, namely free jets and wakes and vortex dynamics are also talked about. It covers important issues of turbulence and turbulent process including their physical phenomena, modelling, and simulation. Homogeneous turbulence, isotropy and dynamics of isotropic turbulence and time dependent numerical simulations are presented along with an introduction to large eddy simulation. This book contains important results as well as details and demonstrations. The results are found by way of experiments and numericals. The book also provides several references for further research and to acquire a deeper knowledge. The chapters of this book deeply cover topics like aspects of dealing with turbulent flow, kinetic energy budgets, turbulent viscosity, and vortex dynamics. The book is written for advanced engineering students, postgraduate engineers, professionals, and researchers.

“Experimental and Computational Fluid Mechanics (Environmental Science and Engineering)” Book Review: The book is basically for the advanced engineering students as well as postgraduate engineers and researchers. It will be equally important for the scientists in physics and chemistry. The book is a balanced piece of work featuring experimental, theoretical as well as computational aspects of fluid mechanics. It also highlights latest developments and research in fluid dynamics. The book includes various applications of fluid dynamics like oceanography, multiphase flows, convection, diffusion, heat transfer, rheology, granular materials, viscous flows, porous media flows, and astrophysics.

“Experimental Fluid Mechanics (C.I.L.)” Book Review: The book introduces dimensional analysis along with its role in relation between the results of model tests and flows at full scale. The topics like tunnel, test rigs, fluid velocity, shear stress measurements, force and position measurement, flow visualization, and specified branches of fluid mechanics are discussed in detail. It contains the essential results as well as details and demonstrates the ones whose oral transmission is often tedious. It provides numerous references which allow readers to study regarding their work and acquire a deeper knowledge on their topics of interest. The book is written for advanced engineering students, postgraduate engineers, and researchers.

“Recent Advances in Experimental Fluid Mechanics” Book Review: The book is an updated and revised piece of work featuring latest theory and recent developments in fluid mechanics and flow physics. This book is a collection of the research papers in the area of flow process. The topics like flow visualization techniques, measurements in high- and low-speed flows, flow control techniques, environmental flows, hydraulics, and computational fluid dynamics are thoroughly explained. The book will be an excellent resource for the students and professionals in civil, aerospace, mechanical, and chemical fields.

“Recent Developments in Theoretical and Experimental Fluid Mechanics: Compressible and Incompressible Flows” Book Review: The book is an excellent blend of conceptual, mathematical, numerical, and experimental aspects of fluid mechanics. The chapters of this book are nicely interpreted and cover various topics like concepts of compressible flows, transonic, supersonics, nozzle and rarefied gas flow. The book also contains problems in the field of incompressible flows such as stability phenomena, boundary layer problems, and fluid machinery. This book will be beneficial for the students and professionals in civil, mechanical, aerospace fields.

“Laser Techniques for Fluid Mechanics: Selected Papers from the 10th International Symposium Lisbon” Book Review: This book contains revised versions of selected papers from the International Symposium on Applications of Laser Techniques. Learn about instrumentation development for scalar flow and velocity. This text allows you to understand the applications of laser techniques and the contributions to laser techniques. You can learn about fluid flow research and the new fluid mechanic research. Get to know about other methods like laser Doppler anemometry.

“Fundamentals of Mechanical Engineering: Thermodynamics, Mechanics, Theory of Machines, Strength of Materials and Fluid Dynamics” Book Review: This book is designed for the UG students of mechanical engineering. The topics which are covered in this book are thermodynamics, mechanics, theory of machines and fluid dynamics. It explains the fundamentals of mechanical engineering in the area of thermodynamics, mechanics, theory of machines, strength of materials and fluid dynamics. The three laws of thermodynamics have been explained in detail. Some other important topics covered are vapour and thermodynamics cycles, simple machines, force system, friction, analysis of beams, trusses, etc. It covers the zeroth, first and second law of thermodynamics. The book includes a series of objective type questions (True and False, Fill in the Blanks and Multiple Choice Questions) with explanatory answers for thorough practice. It also provides a large number of solved problems from the latest university and competitive examination papers.

“Fluid and Thermodynamics: Volume 2: Advanced Fluid Mechanics and Thermodynamic Fundamentals (Advances in Geophysical and Environmental Mechanics and Mathematics)” Book Review: It is designed for the undergraduate students of mechanical engineering, researchers and scientists. This book provides the basic concepts of fluid and thermodynamics. It discusses the creeping motion in an advanced manner. Chapters which are covered in this book are dimensional analysis, similitude and physical experiments. Various theories are also covered in this book. Some of them are stokes flows, oseen correction and lagerstrom-kaplun expansion theories. It also explains the difference-quotient turbulence model. The zeroth, first and second law of thermodynamics are also discussed in this book.

“Wave Dynamics of Generalized Continua (Advanced Structured Materials)” Book Review: It is designed for the postgraduate students, researchers and scientists. This book provides the concept of linear and nonlinear waves. It explains the non-conductive liquid, magnetoelastic, piezo-semiconductors and crystals. It focuses on the propagation of a laser beam through a two-level medium. This book discusses the mechanics of continuous media, physical acoustics and physics of the solid state. The main aim of this book is to provide the fundamental concept of wave dynamics.

“Advanced Dynamics of Mechanical Systems” Book Review: It is designed for the students of mechanical engineering, aerospace engineering and researchers. The main aim of this book is to deal with dynamics of the mechanical system. This book provides the general approach of the mechanical system.It discusses the degrees of freedom and steady state position.It also covers the topics like force field and rotor dynamics. This also consists of a large number of solved examples, problems with solutions, principles and their applications.

“Advanced Engineering Fluid Mechanics” Book Review: TIt is designed for the students of biotechnology, researchers and scientists. This book provides the concepts of methodology of plant breeding. The topics which are covered in this book are heterosis breeding, mutation breeding, plant genetic resources and intellectual property rights. It also explains the plant genomics and molecular approaches in crop improvement.

“Advanced Fluid Dynamics” Book Review: It is designed for the students of mechanical engineering, chemical engineering, researchers and scientists. The main aim of this book is to provide the information of fluid dynamics. Various topics are covered in this book are experimental and numerical fluid dynamics and aeroacoustics. It also explains the multiphase flow analysis, combustion and turbulence modeling. This book also focuses on the principles and practical applications of fluid mechanics in an advanced manner.

“Advanced Fluid Mechanics” Book Review: It is designed for the students of mechanical engineering, scientists and researchers. This covers all major aspects of fluid mechanics. It discusses the flow stability, turbulence, viscous and thermal boundary. The topics which are covered in this book are irrotational 2D flows, navier-stokes equations and thermal effects. It also provides the information of turbulence flows, differential equations and surface waves. It also consists of various solved examples, questions with answers, principles and its application.

“Fundamentals of Fluid Mechanics” Book Review: its application of the visual component of fluid mechanics, and its strong focus on learning. The authors have designed their presentation to allow for the gradual development of student confidence in problem solving. Each important concept is introduced in simple and easy-to-understand terms before more complicated examples are discussed.Continuing this book’s tradition of extensive real-world applications, the new 6th edition includes more Fluids in the News case study boxes in each chapter, new problem types, an increased number of real-world photos, and additional videos to augment the text material and help generate student interest in the topic. Example problems have also been updated and numerous new photographs, figures, and graphs have been added.

“Fluid Mechanics Fundamentals and Applications” Book Review: Fluid Mechanics: Fundamentals and Applications communicates directly with tomorrow’s engineers in a simple yet precise manner. The text covers the basic principles and equations of fluid mechanics in the context of numerous and diverse real-world engineering examples. The text helps students develop an intuitive understanding of fluid mechanics by emphasizing the physics, and by supplying attractive figures, numerous photographs and visual aids to reinforce the physics.

“The Pi-Theorem: Applications to Fluid Mechanics and Heat and Mass Transfer (Experimental Fluid Mechanics)” Book Review: This volume presents applications of the Pi-Theorem to fluid mechanics and heat and mass transfer. The Pi-theorem is important for the intelligent planning of experiments in fluids. The Pi-theorem yields a physical motivation behind many flow processes and therefore it constitutes a valuable tool for the intelligent planning of experiments in fluids. After a short introduction to the underlying differential equations and their treatments, the author presents many novel approaches on how to use the Pi-theorem to understand fluid mechanical issues. The book is a great value to the fluid mechanics community, as it cuts across many subdisciplines of experimental fluid mechanics. The book will be beneficial to the fluid mechanics community, as it cuts across many subdisciplines of experimental fluid mechanics.

“LDA Application Methods: Laser Doppler Anemometry for Fluid Dynamics (Experimental Fluid Mechanics)” Book Review: This technical book considers the application side of LDA techniques. Starting from the basic theories that are crucial for each LDA user, the main subject of the book is focused on diverse application methods. In detail, it deals with universal methodical techniques that have been mostly developed in the last 15 years. The book thus gives for the first time an application reference for LDA users in improving the optical conditions and enhancing the measurement accuracies. It also provides the guidelines for simplifying the measurements and correcting measurement errors as well as for clarifying the application limits and extending the application areas of LDA techniques. Thus, it also supports the further developments of both the hard- and software of LDA instrumentations.

“New Results in Numerical and Experimental Fluid Mechanics” Book Review: This book contains the papers of the 10th AG STAB (German Aerospace Aerodynamics Association). In this association all the scientists and engineers from universities, research-establishments and industry are involved who are doing research and project work in numerical and experimental fluid mechanics and aerodynamics for aerospace and other applications. This book gives an overview of the ongoing work of the first results from the “Luftfahrtforschungsprogramm der Bundesregierung (German Aeronautical Research Program) 1995-1998”. Some of the papers report on work sponsored by the Deutsche Forschungsgemeinschaft, DFG, which also was presented at the symposium is given in this book. This book is beneficial for those in the field of aeronautical engineering and for those who are doing research on fluid mechanics and aerodynamics.

“Analytical Methods for Problems of Molecular Transport (Fluid Mechanics and Its Applications)” Book Review: This book provides readers with fundamental concepts in topics such as kinetic theory of gases, rarefied gas dynamics, transport theory and aerosol mechanics, these topics would help readers understand the problems of molecular transport. It is written in a very simple manner so teachers can use it as a guide while teaching, readers can also use it in the homes. Scientists and engineers working in the fields of rarefied gas dynamics and aerosol mechanics.

“New Results in Numerical and Experimental Fluid Mechanics” Book Review: This book mentions the latest results in numerical and experimental fluid mechanics. Main chapters included are implementation of a method to determine aerodynamic propeller wing integration, Unsteady wake, accurate gradient computations. Other chapters included are cyber matrix, global aerodynamic design optimization, validation of a new near wall. Total of 80 chapters are discussed in this book at great length. This book contains contributions of engineers, researchers and scientists provided at the 21st biannual symposium of the German aerospace aerodynamics Association. This book is suitable for advanced physics and mechanical engineering students.

“Introduction to Fluid Mechanics and Fluid Machines” Book Review: The book is suitable for students of civil engineering, aerospace engineering, biological engineering, and others. It aims to help the students analyse and design various flow systems. It also helps them master fluid mechanics and machines. Introduction, explanation of application and principles has been provided for each chapter. Some of the salient features include coverage of fluid schematics, a thoroughly revised treatment of fundamental equations of conservation, and the complete derivation of the Navier Stokes equation. Expanded coverage for Fluid Kinematics, Boundary Layer, Turbulent Flows, Unsteady and Compressible Flows has been given. Solved examples, exercise problems, etc help in enhanced learning.

“Fluid Mechanics: Including Hydraulic Machines” Book Review: This book is intended for civil, mechanical, aeronautical, chemical and electrical engineering students. It deals with the various aspects of flow phenomena. It projects a physical picture through description aided with illustrations. The table of contents include Fluid Statics and Kinematics and Dynamics; Navier Stokes Equations of Motion; Laminar, Boundary and Turbulent Flow, etc.Variety of solved, unsolved problems, numericals and objective type questions and answers selected from examination question papers of various Engineering colleges have been provided.