This set of Petroleum Production Operations Multiple Choice Questions & Answers (MCQs) focuses on “Well Completion Design – Concepts”.
1. Pseudo pressure is a pressure function that considers the variable compressibility and viscosity of gas with respect to temperature.
a) True
b) False
View Answer
Explanation: The statement is incorrect. The correct statement is Pseudo pressure is a mathematical pressure. Pseudo pressure considers the variable compressibility and viscosity of gas with respect to pressure.
2. What is a dog-leg in oil and gas well drilling?
a) Bore hole
b) Place near the perforation
c) Logging data obtained
d) Changing of well trajectory rapidly
View Answer
Explanation: A dog-leg in oil and gas well drilling means a crooked place where the wellbore trajectory changes rapidly. Sometimes directional drillers intentionally create the dog leg to reach the desired target.
3. The full form of BOP is _____
a) Bottom hole Pressure
b) Bottom Oil Price
c) Below Optimum Pressure
d) Blow Out Preventer
View Answer
Explanation: The full form of BOP is Blow Out Preventer. An uncontrolled kick (or influx of formation fluid into the well bore) is called a Blow Out. So, to prevent this BOP or arrangement of several valves are attached above the well to seal, control and monitor the well.
4. Which of the following is a Cased hole completion?
a) Casings are run into the zone of interest
b) Casings aren’t run into the zone of interest
c) Casings are not used inside the well
d) Cementing is not done in the well
View Answer
Explanation: Cased hole completion is a type of completion in which Casings are run in the zone of interest i.e. the reservoir. To initiate the production of oil or gas perforation is to be done through the casing then to the cement and finally to the formation of interest.
5. In general, when a perforation job is to be done then a Casing-Collar- Locator (CCL log) is also run to ensure the correct depth.
a) True
b) False
View Answer
Explanation: Yes, when a perforation job is to be done then a Casing-Collar- Locator (CCL log) is also run to ensure the correct depth. It identifies both the collar location and the packer location.
Sanfoundry Global Education & Learning Series – Petroleum Production Operations.
To practice all areas of Petroleum Production Operations, here is complete set of 1000+ Multiple Choice Questions and Answers.
If you find a mistake in question / option / answer, kindly take a screenshot and email to [email protected]
- Check Chemical Engineering Books
- Practice Chemical Engineering MCQs
- Apply for Chemical Engineering Internship
- Check Petroleum Production Operations Books