This set of Farm Machinery Multiple Choice Questions & Answers (MCQs) focuses on “Harrows”.
1. The flanged tube, mounted on the gang axle between every two discs to retain them at fixed position laterally on the shaft is called ______
a) Spool
b) Gang
c) Bearing
d) Scraper
View Answer
Explanation: Spool is just a device for keeping the discs at equal spacing on the axle. It is usually cast in special shapes and sizes and is generally made of cast iron.
2. Which disc harrow has two gangs in tandem and two fitted one behind the other?
a) Tractor drawn
b) Off set
c) Tandem
d) Double action
View Answer
Explanation: Offset Disc harrow has two gangs in tandem and two fitted one behind the other. The discs of both gangs face in opposite directions.
3. What is the size of the discs in tractor drawn disc harrows?
a) 20-30 cm diameter
b) 10-30 cm diameter
c) 90-110 cm diameter
d) 35-70 cm diameter
View Answer
Explanation: Disc is a circular, concave revolving steel plate used for cutting and inverting the soil. Disc is made of high grade heat treated hardened steel. Tractor drawn disc harrows have concave discs of size varying from 35 to 70 cm diameter.
4. What is the weight of the disc harrow?
a) 80 to 100 kg
b) 30 to 50 kg
c) 10 to 40 kg
d) 23 to 56 kg
View Answer
Explanation: Usually transport wheels are provided for easy movement of the harrow from place to place. The size of the harrow is determined by the maximum width of cut of the soil. The weight of the disc harrow varies between 80 to 100 kg.
5. What is the range of the gang angle?
a) 29°-39°
b) 34°-56°
c) 0°-27°
d) 89°-100°
View Answer
Explanation: The lever of the gang angle mechanism is usually made of mild steel flat with wooden handle. The gang angle can be adjusted approximately in the range from 0° to 27° only.
6. Which harrow is known as knife harrow?
a) Patela
b) Spring tooth harrow
c) Triangular harrow
d) Acme harrow
View Answer
Explanation: Acme harrow is a special type harrow having curved knives also known as knife harrow. The front part of the knife compacts the soil and crushes the clods. A good pulverisation is obtained by this harrow easily.
7. How many acres can be covered by a harrow of 1.5 m width in a day of 8 hours with bullock power. If each spike of the harrow is giving 1 kg resistance when there are 50 spikes. What power would be necessary for the bullocks to pull the harrow?
a) 0.544 KW
b) 0.987 KW
c) 0.123 KW
d) 0.333 KW
View Answer
Explanation: Area covered/hr = 1.5*4*1000 m3
Area per 8 hours = 6000*8 m2 = 4.8 ha
Total draft = 50 kg
Power, KW = \(\frac{Draft*speed}{1000}=\frac{50*9.8*4*1000}{60*60*1000}\) = 0.544.
8. What power is necessary for pulling a harrow with 50 times, each giving a resistance of 1 kg, when the speed of harrow is 5km/hr.
a) 0.980 KW
b) 0.223 KW
c) 0.680 KW
d) 1.902 KW
View Answer
Explanation: Total soil resistance = 50 kg
Power = \(\frac{soil \, resistance*speed}{1000}=\frac{50*9.8*5*1000}{1000*60*60}\) = 0.680 KW.
Sanfoundry Global Education & Learning Series – Farm Machinery.
To practice all areas of Farm Machinery, here is complete set of 1000+ Multiple Choice Questions and Answers.
If you find a mistake in question / option / answer, kindly take a screenshot and email to [email protected]
- Check Farm Machinery Books
- Practice Agricultural Engineering MCQs
- Check Agricultural Engineering Books
- Apply for Agricultural Engineering Internship