## PLC Program for Oil and Water Separation Process

This is a PLC Program for Oil and Water Separation Process. Problem Description Implement programming of Oil and Water separation process in PLC using Ladder Diagram programming language. Problem Diagram Problem Solution Due to the gravitational force and different liquid density of Water and Oil, when water and oil both are present in the liquid, … Read more

## PLC Program to Store Temperature Data of a Process at Different Time

This is a PLC Program to Store Temperature Data of a Process at Different Time. Problem Description Temperature of two tanks are being controlled. To display and compare temperature of both the tanks, graphical display is used. Update temperature of these tanks on the display every 5secs for comparison with respect to time. Implement this … Read more

## PLC Program to Store Data of Various Process Sequentially

This is a PLC Program to Store Data of Various Process Sequentially. Problem Description There are total two parameters to be monitored of a tank. Display level and temperature of this tank for 5secs each. Implement this in PLC using Ladder Diagram programming language. Problem Solution Continuous measurement is necessary in this case. Continuous level … Read more

## PLC Program to Detect and Remove Burned Chips

This is a PLC Program to Detect Burned Chips and Remove Them. Problem Description Potato chips are made and ready to be packed. But before that, it goes through a conveyor in which final quality check is done, burnt chips are detected and removed from the process line. Implement automation of this process in PLC … Read more

## PLC Program to Operate Screwing of Parts

This is a PLC Program to Operate Screwing of Parts. Problem Description When a plate is placed, screws are to be fit at each corner of the plate. Use robotic arm to perform this action and implement automation of this in PLC using Ladder Diagram programming language. Problem Diagram Problem Solution Robotic arm used to … Read more

## PLC Program to Separate Big and Small Parts

This is a PLC Program to Separate Big and Small Parts. Problem Description Two different sized particles are being moved on the conveyor belt. To pack these particles, two different boxes are used separately. These products must not be packed in the same box. Separation of these particles is to be controlled. Implement automation to … Read more

## PLC Program to Control Spray-Painting of Parts

This is a PLC Program to Control Spray-Painting of Parts. Problem Description Control Spray-Painting operation in PLC using Ladder Diagram programming language. Problem Diagram Problem Solution Spray-Paining operation is similar to the bottle capping operation. The only difference is that Bottle Capping operation used timers while Spray-Paining operation do not require timers. Two limit switches … Read more

## PLC Program to Display Level of Three or More Tanks

This is a PLC Program to Display Level of Three or More Tanks. Problem Description There are total 3 tanks of which level is being controlled. Display level of these tanks for 5secs of one by one. Implement this in PLC using Ladder Diagram programming language. Problem Solution Continuous measurement is necessary in this case. … Read more

## PLC Program to Display Level of a Tank

This is a PLC Program to Display Level of a Tank. Problem Description There is a tank of which level is controlled automatically. Display level of this tank continuously. Perform this in PLC using Ladder Diagram programming language. Problem Solution Continuous measurement is necessary in this case. Continuous level measuring devices such as Ultrasonic, Radar, … Read more