This set of Biomedical Instrumentation Questions and Answers for Campus interviews focuses on “Medical Diagnosis with Chemical Tests”.
1. Which of the following is not the electrolyte?
Explanation: For instance, the group of important anions and cations of the blood plasma (electrolytes) like sodium, potassium, chloride and bicarbonate, which together with serum urea form a related set of tests— performed on patients with electrolyte disturbances.
2. The blood pressure within the glumerular capillaries is _________ of mercury.
a) 80 mm
b) 70-80 mm
c) 90 mm
d) 70-90 mm
Explanation: The renal arteries carry blood at a very high pressure from the aorta into the glomerular capillary tuft. The blood pressure within the glomerular capillaries is 70–90 mm of mercury. The blood flow through the capillary tuft is controlled by the state of contraction of the muscle of the arteriole leading to the tuft.
3. In the sampling unit, when it is in its earlier form consisted of a circular turntable carrying around its rim 40 disposable __________ of 2 ml capacity.
a) polyvinyl cups
b) polythene cups
c) polyester cups
d) polystyrene cups
Explanation: The unit in its earlier form consisted of a circular turntable carrying around its rim 40 disposable polystyrene cups of 2 ml capacity. The sample plate carrying these cups rotates at a predetermined speed. The movement of the turntable is synchronized with the movements of a sampling crook.
4. What is the ratio of the sampling time to wash time?
Explanation: Between each sampling, the crook enters a receptacle of water or other suitable wash fluid, to reduce cross-contamination of one sample with another. The ratio of sampling time to wash time is normally 2:1.
5. In the sampling control, one complete rotation of the plate thus presents _______
a) 35 samples
b) 40 samples
c) 20 samples
d) 30 samples
Explanation: The plate rotates a distance sufficient to allow the tube, when it next moves down, to dip into the next cup. One complete rotation of the plate thus presents 40 samples. As the sample plate completes a cycle, a switch is operated, which stops the rotating action of the plate and the sampling action of the sample probe. The sampling rate can be adjusted to 20, 40 or 60 per hour.
6. In the sampler, the range of the sample size is from _______
a) 0.1 to 8.5 ml
b) 1 to 8.5 ml
c) 0.85 to 0.1 ml
d) 8.5 to 10 ml
Explanation: With this sampler, the sample size may range from 0.1 to 8.5 ml. It utilizes cups of sizes 0.5, 2, 3 and 10 ml. The sample plate is kept covered to prevent evaporation, which may sometimes lead to errors up to 5%. Sampling and washing periods are controlled by a programming cam.
7. Which cams are used in the earlier modules of auto-analyzers to initiate and control sample aspiration and wash cycles?
a) Electrical cams
b) Digital cams
c) Analog cams
d) Mechanical cams
Explanation: Mechanical cams were used in the earlier modules of auto-analyzers to initiate and control sample aspiration and wash cycles. Modern systems use electronic timers to do the same function. These timers provide a greater flexibility in the control of the sample-to-wash ratios, which in turn allows flexibility in setting up parameters for analyses.
8. The function of the _________ is to continuously and simultaneously push fluids, air and gases through the analytical chain.
a) sampling unit
b) proportioning pump
Explanation: The function of the proportioning pump is to continuously and simultaneously push fluids, air and gases through the analytical chain. In fact, it is the heart of the automatic analysis system.
9. In the proportioning pump, two speed pump has a non-synchronous _____ rpm motor.
a) 10 rpm
b) 30 rpm
c) 45 rpm
d) 15 rpm
Explanation: Proportioning pumps are available either for single-speed or for two-speed operations. The single-speed pump has the capacitor synchronous gear head utilizing 10 rpm output shaft at 50 Hz. The two-speed pump has a non-synchronous 45 rpm motor.
10. ________ is not the part of the manifold.
a) Transmission tubing
b) Pump tubes
d) Plastic tubes
Explanation: A manifold mainly consists of a platter, pump tubes, coils, transmission tubing, fittings and connections. A separate manifold is required for each determination and the change can be effected within a few minutes. The pump tubing and the connected coils are placed on a manifold platter, which keeps them in proper order for each test.
Sanfoundry Global Education & Learning Series – Biomedical Instrumentation.
To practice all areas of Biomedical Instrumentation for Campus Interviews, here is complete set of 1000+ Multiple Choice Questions and Answers.