Best Books – Thermomechanical Processing and Forming of Steel

We have compiled the list of Top 10 Best Reference Books on Thermomechanical Processing and Forming of Steel subject. These books are used by students of top universities, institutes and colleges. Here is the full list of top 10 best books on Thermomechanical Processing and Forming of Steel along with reviews.

Kindly note that we have put a lot of effort into researching the best books on Thermomechanical Processing and Forming of Steel subject and came out with a recommended list of top 10 best books. The table below contains the Name of these best books, their authors, publishers and an unbiased review of books on "Thermomechanical Processing and Forming of Steel" as well as links to the Amazon website to directly purchase these books. As an Amazon Associate, we earn from qualifying purchases, but this does not impact our reviews, comparisons, and listing of these top books; the table serves as a ready reckoner list of these best books.

1. “Mechanical Metallurgy” by G Dieter

Book Review: This book is the most popular book in the field of metallurgy and carries out examination of the behavior of materials under stress and also captures their reaction to many hostile environments. The book covers all the aspects related to mechanical metallurgy ranging from stress and strain description through flow and fracture defect mechanisms. The book also takes into account the mechanical property tests and basic metal working processes. The book also contains exercise questions at the end of every chapter.

2. “Thermo-Mechanical Processing of Metallic Materials” by B Verlinden

“Thermo-Mechanical Processing of Metallic Materials” Book Review: The book deals with the underlying principles of thermo-mechanical processing. It can be accessed by graduate students along with working engineers of the field. The contents of the book are covered in three sections. The initial section of the book talks about microstructural science of metallic materials and hence the derived properties. Further, the book discussed recent advances and the present status of technology involved in plastic forming of metals. The last section of the book correlates the former sections with the help of numerous case studies and also provides the scope of TMP processing.

3. “Manufacturing Engineering and Technology” by S Kalpakjian

Book Review: This is a very good course book in manufacturing processes and is a great reference book for professionals. This book also provides a strong foundation in manufacturing processes. The book demonstrates the science, technology and practice of manufacturing. The book contains in depth descriptions about the manufacturing processes thereby helping the students to study important concepts. This book is of great use to the professionals as well as students studying manufacturing engineering.

4. “Handbook on Steel Bars, Wires, Tubes, Pipes, S. S. Sheets Production with Ferrous Metal Casting & Processing” by B P Bhardwaj

“Handbook on Steel Bars, Wires, Tubes, Pipes, S. S. Sheets Production with Ferrous Metal Casting & Processing” Book Review: The book focuses on various processes employed in the manufacturing of steel products. It can be of importance to working professionals as well as entrepreneurs looking to invest in iron and steel industries. Several concepts related to ferrous metals such as casting, heat treatment, stamping process, forming process, machining process and joining process. Apart from ferrous metals, emphasis is also laid on fabrication of Steel Bars, Steel Tube & Pipe, Stainless Steel Sheet and Different Grades of Stainless Steel.

5. “High-Quality Steel Rolling: Theory and Practice” by Vladimir B Ginzburg

“High-Quality Steel Rolling: Theory and Practice” Book Review: Science and technology of high quality steel products. It can be of interest to students, researchers as well as working professionals of the field. Various geometrical parameters to be considered in flat-rolled steel products are described. Transducers and sensors are classified into various categories. Methods of changing the width using casting, rolling, and pressing are covered. Important concepts of roll deformation, roll thermal expansion, roll wear, and roll bending are elucidated. Analysis of defects in automatic control systems along with new techniques of computer modeling employed in product quality analysis are also highlighted.

6. “Steel Processing and Conversion” by AMERICAN DROP FORGE

“Steel Processing and Conversion” Book Review: The book highlights numerous steel processing and conversion techniques. It targets anybody involved in the processing of steel products as well as engineers and laymen working on steel as a profession or hobby. Processes involved in manufacturing of steel products are covered. The financial aspects of setting up a manufacturing industry are also discussed. Science and technology involved in the metallurgy of steel is presented.

7. “Advanced Processing of Metals and Materials” by Kongoli Reddy

“Advanced Processing of Metals and Materials” Book Review: The book contains proceedings of the Sohn International Symposium held in august 2006 at San Diego, California. It can be read by researchers and scientists working in the field. The book in discussion focuses on management, environmental concerns and the legal aspects involved in processing of metals and materials. It is the last book in a series of books dealing with the topics at hand. Legal perspectives and business management strategies of metals and materials industries are presented. Emphasis is laid on environmental issues and methods of dealing with them such as recycling and efficient waste treatment.

8. “The Basic Open-Hearth Steel Process” by Carl Dichmann

“The Basic Open-Hearth Steel Process” Book Review: The book focuses on the open-hearth steel process. It can be of use to working professionals of the field and researchers of the topic. Quantitative treatment of the subject is employed. Various factors and properties of the materials used in the open-hearth process are discussed. Concepts of fuel technology and gas producer working are also covered.

9. “Quality Improvement of PM Steel Processes: A Statistical Approach” by Bjarne Bergquist

“Quality Improvement of PM Steel Processes: A Statistical Approach” Book Review: Quality improvement techniques of steel processes and hence the products are covered in this book. It targets working professionals and researchers alike. Both statistical methods as well as metallurgical investigations concepts are discussed and further extended to enhancing the quality of sinter steel products. Mechanical and dimensional properties of steel are described so as to highlight the scope of quality improvement. Iron phosphorous system and water atomization of iron powder are emphasised.

10. “Flat-Rolled Steel Processes : Advanced Technologies” by Ginzburg

“Flat-Rolled Steel Processes : Advanced Technologies” Book Review: The book focuses on specific steel processes and the science and technology involved. It is recommended to researchers and scientists as well as students of graduate level courses of the domain. Recent advances in technological improvements in steel processes are discussed. Modern rolling mills are covered and contrasted with standard rolling mills to understand them better. Emphasis is laid on modeling of flat-rolling processes. Measurement, automation and process control strategies are elucidated. Strip profile and flatness control are also covered.

People who are searching for Free downloads of books and free pdf copies of these top 10 books on Thermomechanical Processing and Forming of Steel – we would like to mention that we don’t have free downloadable pdf copies of these good books and one should look for free pdf copies from these Authors only if they have explicitly made it free to download and read them.

We have created a collection of best reference books on "Thermomechanical Processing and Forming of Steel" so that one can readily see the list of top books on "Thermomechanical Processing and Forming of Steel" and buy the books either online or offline.

If any more book needs to be added to the list of best books on Thermomechanical Processing and Forming of Steel subject, please let us know.

Sanfoundry Global Education & Learning Series – Best Reference Books!

Subscribe to our Newsletters (Subject-wise). Participate in the Sanfoundry Certification contest to get free Certificate of Merit. Join our social networks below and stay updated with latest contests, videos, internships and jobs!

Youtube | Telegram | LinkedIn | Instagram | Facebook | Twitter | Pinterest
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & technical discussions at Telegram SanfoundryClasses.