68 Best Books on Material Characterization

“An Introduction to Material Characterization” Book Review: The book is about material characterization. This book is a summary of various methods of characterization. They are commonly used in engineering. It is useful to students and professionals studying material characterization. It provides basic concepts to in-depth knowledge of the subject. It also summarizes all different methods of characterization of materials. This book can be used by engineers.

“Molecular Materials: Preparation, Characterization, and Applications” Book Review: This book elaborates about interdisciplinary research of advanced-molecular materials. It contains synthesis and characterization of molecular materials.

“Materials Characterization Techniques” Book Review: This book will be very helpful to scientists and engineers involved in characterization of materials. It is also useful to undergraduate students studying material characterization. This book performs analysis and differentiation of different materials as well as their combination. These materials can be metals, ceramics, polymers, semiconductors or even composites. In order to know the structure of a material and its properties, scientists carry out application of principles related to physics, chemistry and biology, its processing as well as engineering. The book also stresses on the practical applications and case studies. The book also demonstrates topics like advanced surface, quality assurance, and contamination control and process improvement. It provides information about electrons, x-ray photoelectrons and UV spectroscopy. It explains different uses and technical requirements for characterization techniques. This book is very useful to scientists and engineers as well as for students at the graduate and undergraduate level.

“Microstructural Characterization of Materials” Book Review: The book is suitable for senior undergraduate and graduate students of material science, materials engineering and materials chemistry. This is an introduction to the subject. Introduction is for Microstructure of Engineering Materials. The experimental method has also been described. Methodology and characterization has been explained. They are given for crystal structure, microstructural morphology, and microanalysis. Methods included are diffraction analysis, optical microscopy and electron microscopy.Chemical microanalytical techniques have also been included. There is a new chapter included. It is based on surface probe microscopy. New sections of digital image recording and analysis are also included. Other new sections are orientation imaging microscopy. This is focused on ion-beam instruments, atom-probe microscopy, and 3-D image reconstruction. There are new examples and exercises. It introduces the expertise involved in assessing the microstructure of engineering minerals. It consists of topics like diffraction analysis, optical microscopy, electron microscopy and chemical microscopy. This book can be used by senior undergraduate and graduate students.

“Characterization of Metals and Alloys (Materials Characterization Series)” Book Review: Molecular and atomistic properties have been focused upon in this book. Their effects on different techniques have also been studied. These techniques are for measuring and analysing. They do so for internal structure, surface structure, and chemical/physical properties. It explains how scanning electron microscopy can be used in various other techniques. It connects common characterization techniques and it’s ways of using.

“Materials Characterization: Introduction to Microscopic and Spectroscopic Methods” Book Review: The book can be used by undergraduate students who are starting with study of material characterization. The book contains commonly used methods for microstructure analysis. It includes light microscopy, x-ray diffraction and scanning electron microscopy. It also includes techniques for chemical analysis and introduces x-ray energy dispersive spectroscopy. This is a book based on metallurgical and material science. It can be used by undergraduate and postgraduate students. Basics of each topic have been described. Crystal structure and instruments have been studied. The characterization techniques have been described in great detail. The book has been divided into two parts. Understanding of structures in the very first part. Description of crystallographic planes and directions is also given. They are described quantitatively. Second part is based on basic principles and applications. These are given for X Ray and electron diffraction. Small angle increasing incidence is also described. It also describes x-ray diffraction and spectroscopic analysis methods. There is a chapter on electron microscopes. Various instruments are described in this chapter. They are TEM, SEM, FESEM. Microprobe analyzer and AFM are also included. Spectroscopic methods like UV-VIS, IR & FTIR are discussed. Raman and Auger electron spectroscopy is also included in this.

“Materials Characterization” Book Review: This book has the new research of the field. This is a book based on metallurgical and material science. It can be used by undergraduate and postgraduate students. Basics of each topic have been described. Crystal structure and instruments have been studied. The characterization techniques have been described in great detail. The book has been divided into two parts. Understanding of structures in the very first part. Description of crystallographic planes and directions is also given. They are described quantitatively. Second part is based on basic principles and applications. These are given for X Ray and electron diffraction. Small angle increasing incidence is also described. It also describes x-ray diffraction and spectroscopic analysis methods. There is a chapter on electron microscopes. Various instruments are described in this chapter. They are TEM, SEM, FESEM. Microprobe analyzer and AFM are also included. Spectroscopic methods like UV-VIS, IR & FTIR are discussed. Raman and Auger electron spectroscopy is also included in this. The book consists of research results for process and techniques of material characterization. This book contains all aspects of structural and chemical characterization of the materials. It also contains a lot of examples and illustrations for better understanding.

“Perspectives in Materials Characterization” Book Review: The book will be useful to undergraduate and postgraduate students of engineering. It is also useful to engineers of the metallurgy field. It contains numerous experimental techniques for determining physical and chemical characterization of materials. It also contains advanced techniques with basics.

“In-situ Materials Characterization (Springer Series in Materials Science)” Book Review: The book contains interdisciplinary reference for research using situ techniques. It provides real-time dynamics of materials, surface processes and chemical and biological reactions at various time scales.

“Characterization of Materials” Book Review: This is a book based on metallurgical and material science. It can be used by undergraduate and postgraduate students. Basics of each topic have been described. Crystal structure and instruments have been studied. The characterization techniques have been described in great detail. The book has been divided into two parts. Understanding of structures in the very first part. Description of crystallographic planes and directions is also given. They are described quantitatively. Second part is based on basic principles and applications. These are given for X Ray and electron diffraction. Small angle increasing incidence is also described. It also describes x-ray diffraction and spectroscopic analysis methods. There is a chapter on electron microscopes. Various instruments are described in this chapter. They are TEM, SEM, FESEM. Microprobe analyzer and AFM are also included. Spectroscopic methods like UV-VIS, IR & FTIR are discussed. Raman and Auger electron spectroscopy is also included in this.

“Production, Handling and Characterization of Particulate Materials (Particle Technology Series)” Book Review: This is the new edition of the book. It is based on various techniques and methods. Commercial production of particulate materials has been described. It starts from millimetre and ranges to nanometer scale. The physical and chemical background of the subject has been included. Experimental optimisation of equipment has also been described. The current procedures and future prospects has been included. The book addresses various issues like specification and control parameters. These issues are of industrial importance. Techniques are discussed. They are discussed in relation to applications. The experts of the field have contributed to this book. The book aims to help different unit operations. The book is mainly focused on industrial applications.

“Characterization of Composite Materials” Book Review: This book is based on research work. The research was conducted on mechanical properties of E-glass/Epoxy & E-glass/Polyester composite. The results are documented in this book. Describe the dependence of mechanical properties on the strain rate. Better properties of E-glass/Epoxy were observed When strain rate was high. This research described that a particular material was suitable for structural automotive body panel applications.

“Advances in Materials Characterization” Book Review: An expert team of national and international scientists have contributed to this book. This book is mainly based on characterization. The basics and current progress has been described. The book reviews the advances made in the field. This book has review articles, introductions and overviews. Demonstrations of applications have also been included.

“Radar Absorbing Materials: From Theory to Design and Characterization” Book Review: The book describes the subject in an easy way. It is a brief but complete book. The chronological development of RAM is studied. The basic principles are studied. Mathematical analysis and design of RAM presented. The relevant computer codes have also been included. It also includes the correspondent source codes.

Book Review: This book provides introduction to the methods that are used for analysis of instruments. The book also covers numerous topics like chemo metrics, robotics, information management systems related to laboratory, instrumentation role in analytical methods and many more. The book also provides updated information on graphite furnace AA, ICP and DCP, Fourier transform instruments, hyphenated methods, ion chromatography, spectroscopy and many more. The book also discusses about the computer role in the field of instrumentation and laboratories.

“Materials Characterisation: v. 5: Computational Methods and Experiments: 72 (WIT Transactions on Engineering Sciences)” Book Review: The book contains papers presented at the 6th international conference on materials characterisation. It is recommended to researchers, scientists along with students of advanced level courses on the topic. Concepts of computational methods, experimental strategies and other key areas of materials characterisation are elucidated. The various papers presented covered a plethora of topics such as Computational models and experiments, Mechanical characterisation and testing, Micro and macro materials characterisation, Corrosion problems, Innovative experimental technologies, Recycled materials, Thermal analysis, Advances in composites, Cementitious materials, Structural health monitoring; Energy materials.

“Multi Length-Scale Characterisation: Inorganic Materials Series” Book Review: The book covers topics of characterisation of inorganic materials. It can be referred to by students and researchers alike. Various experimental techniques employed in characterising inorganic materials in order to apply them in the required fields. Meso- and macro-scopic length scales used in evaluating the structures and properties of materials are covered. Other topics included are Measurement of Bulk Magnetic Properties, Thermal Methods, Atomic Force Microscopy, Gas Sorption in the Analysis of Nanoporous Solids, Dynamic Light Scattering.

“Nonconventional and Vernacular Construction Materials” Book Review: Non Conventional construction materials are studied in this book. It can be of use to researchers, students of the field. The contents of the book are covered in four parts. Part 1 deals with the historical overview of vernacular construction and discusses the future scope of these materials. Further, the book proceeds to talk about natural fibers and their applications in various composites. Part three of the book focuses on usage of industrial by-products and ashes in cement mortar, concrete and other construction materials. Last part of the book emphasises the usage of timber, bamboo, and paper as construction materials.

“Carbon and Oxide Nanostructures: Synthesis, Characterisation and Applications: 5 (Advanced Structured Materials)” Book Review: Carbon and oxide based nanostructured materials are examined in this book. It can be accessed by students of undergraduate and postgraduate level courses on the subject and researchers carrying out studies in the field. Synthesis, characterisation and applications of carbon based nanomaterials such as carbon nanotubes, carbon nanofibers and fullerenes are discussed. Nanostructured magnetic and electric materials along with their applications in various fields including the petro-chemical industry are elucidated. Apart from theory, mathematical calculations and modeling of nanostructured materials are also covered.

“Polymer Optical Fibres: Fibre Types, Materials, Fabrication, Characterisation and Applications” Book Review: The book presents various aspects of polymer optical fibres. It targets students and researchers of the subject. A range of topics regarding materials, fabrication, characterization, measurement techniques and applications of the fibres are elucidated. Optical effects such as light propagation, degrading effects of attenuation, scattering, and dispersion are emphasised. Applications of the concepts in the field of communication, illumination and sensors are also covered.

“Non-Destructive Testing (Characterisation of high temperature materials)” Book Review: The book covers a wide variety of non destructive testing of flaws in various materials. Engineers and working professionals can access this book. Detection of flaws in components like forgings, castings, bar, tube, pipe and fabrications are elucidated. Characterisation of these flaws is also discussed.

“Characterization of Catalytic Materials (Materials Characterization Series)” Book Review: The book covers common and conventional means of characterising catalytic materials. It is of use to researchers as well as students. Surface and structural properties of various catalytic materials are discussed. Bulk metals, alloys, metal oxides and metal sulfides are studied. Zeolites, molecular sieves and alumina pillared clays are also emphasised. A range of applications of the included concepts such as Auger Electron Spectroscopy, Energy-Dispersive X-Ray Spectroscopy, Neutron Activation Analysis, Scanning Electron Microscopy, and Transmission Electron Spectroscopy are described.

“Materials Metrology and Standards for Structural Performance” Book Review: This book is used as a reference in the subjects materials metrology and standards for engineering design. It is used internationally due to its comprehensive examination of metrological considerations along with control techniques. Some of the main topics discussed in this book are Mechanical Testing Machine Criteria, Dynamic Control Methods, Materials Metrology and Standards, Dynamic Control Methods. It is used by materials scientists and engineers from graduates to experienced professionals and anyone dealing with instrumentation.

“Ferroelectric Dielectrics Integrated on Silicon” Book Review: This book talks about microsystems applied to microelectronics core technologies. It explains the basic thermodynamics applied to high-K materials emphasizing the specificity of thin films. It even explains the role played by X-Ray Diffraction characterization in the field. Three applicative chapters cover integrated capacitors, variable capacitors and ferroelectric memories. The final chapter deals with a reasonably new research field, multiferroic thin films. This book is a reference for engineering graduates and science professionals working specifically in the field, Ferroelectric Dielectrics.

“Welding Metallurgy of Stainless Steels” Book Review: The important topics under stainless steels, corrosion resistance, weld metal mechanical properties and the integrity of the welded joint, are discussed. This book also gives information on the metallurgical problems that may be encountered during stainless steel welding. It also specifically discusses the signif­icance of constitution diagrams, on the processes occurring during the solidification of weld metal and on the recrystallization and precipitation phenomena which take place in the area of the welds. It is a useful book for engineers and academicians in the field and people simply interested in the subject.

“Characterization of Corrosion Products on Steel Surfaces (Advances in Materials Research)” Book Review: The fundamental aspects of the materials characterization for the ferric oxyhydroxides formed on steel surfaces is discussed. The text relates this to their various states and their role in corrosion processes. The atomic-scale structure of rust is an important aspect that has been explored in this textbook. It relates to how ferric oxyhydroxides containing a small amount of alloying elements play a role in the corrosion process. This is a valuable source for anyone studying corrosion, to experts or non-experts, alike.

“Handbook of Applied Superhard Materials” Book Review: A comprehensive overview of the major superhard materials such as polycrystalline, single crystal diamond, and boron nitride is provided in this handbook. The properties of the corresponding materials in the different fields is discussed to give the reader an idea about the applications of these materials. The authors explain in detail about when and how to make the transition to a superhard solution and explore the changes in requirements that are the driving force behind the creation and modification of superhard materials. This book is for the materials scientists and engineers. Its appeal lies in the collation of both current research knowledge of the materials and the latest relevant requirements and solutions from industry.

“Materials Characterization, Metals Handbook Vol. 10” Book Review: This is the 10th volume. This handbook acts as a reference on modern analytical techniques. The goal of this handbook facilitates the interactions between materials engineers and characterization specialists to come up with solutions. It enables the materials engineer to make a fairly quick decision about what type of characterization specialist to see. This volume is one of the few basic reference sources on the subject of materials characterization. It cuts through the confusing and at times intimidating array of analytical acronyms.

“Materials for Nuclear Plants: From Safe Design to Residual Life Assessments” Book Review: The book, as the title suggests, provides a comprehensive treatment of the structural materials for nuclear power plants with emphasis on advanced design concepts. It has a systematic approach to explaining the concepts. Important components and materials currently in use as well as those which can be considered in future designs are detailed. Designers on courses for code development, such as ASME or ISO and nuclear authorities will also find this a useful reference.

“Corrosion and Electrochemistry of Zinc” Book Review: This book is about one of the earliest known alloys. The book simply talks about zinc. Its properties, history of the element, its uses in the different places, etc,. Is discussed in the book. The uses of zinc are manifold, ranging from galvanizing to die castings to electronics. These applications are also comprehensively described. It has also been found to be used as a sacrificial anode for the protection of ships and pipelines from corrosion. This reference book is a must read for anyone exploring zinc and its uses.

“Inter-Laboratory Study on Electrochemical Methods for the Characterization of Cocrmo Biomedical Alloys” Book Review: This book is a special issue of Corrosion Engineering Science and Technology and is dedicated to the study of corrosion of objects from historical sites. It is based on the contributions from the 2009 EUROCORR session on Corrosion of Archaeological and Heritage Artefacts organised by the European Federation of Corrosion’s working party and commissioned articles on other key issues. This book’s aim is to give the readers a view into how corrosion of ancient materials worked. The articles here shed light on a range of analytical approaches related to the study of the complex systems that make up historical artifacts.

“Electrochemical and Optical Techniques for the Study and Monitoring of Metallic Corrosion” Book Review: This book explains the recent years developments in a renaissance in the development of new electrochemical and optical techniques. These are the techniques discussed in the book. It even uses instrumentation to aid the quest to gain insight into the complex mechanisms involved in metallic corrosion and passivation. The book is basically for anyone interested in learning and studying and monitoring of metallic corrosion.

“Active Protective Coatings: New-Generation Coatings for Metals (Springer Series in Materials Science)” Book Review: The book covers a wide range of materials science. It has been brought to bear on providing solutions to the challenges of developing self-healing and protective coatings for a range of metals. It has borrowed from fields such as the food and pharmaceutical industries who have used polymer techniques, sol-gel science and colloidosome technology for a range encapsulation techniques. The book talks about how materials react with each other and can be used as a protection for certain other materials.

“Modern Aspects of Electrochemistry” Book Review: This book analyzes and summarizes recent developments in several key interfacial electrochemical systems in the areas of fuel cell electrocatalysts, electrosynthesis and electrodeposition. The chapters are written by internationally recognized experts in their corresponding fields. It analyzes and summarizes recent developments in several key interfacial electrochemical systems in the areas of fuel cell electrocatalysts, electrosynthesis and electrodeposition.

“Catalysts and Surfaces Characterization Techniques” Book Review: This book explores analytical techniques of studying surfaces. Static and dynamic aspects of surfaces have been studied. This book examines surfaces on a molecular level. The nature of the transformants have also been studied. They have been studied by electron, ion, photon induced spectroscopic techniques.

“Polymer Characterization: Physical Techniques” Book Review: This is an up-to-date book on the subject. The book reviews various characterization methods. Basic polymer science is described in the beginning. Principles are described in easy language. There are various applications and illustrations. Topics like molecular weight determination are included. It also has molecular and structural characterization by spectroscopic techniques. Morphology and structural characterization by microscopy and diffraction is also included. Thermal analysis has also been described. There is a new chapter based on surface analysis. Basic knowledge of the subject is required.

“Characterization Techniques of Glasses and Ceramics” Book Review: This book contains lectures of a summer course. It was held at University of La Laguna. It describes some main characterization techniques. They are useful for ceramics, glasses and glass-ceramics. Describe characterization by microscopic methods. Also reviews inorganic materials like zeolites.

“Synthesizing Methods: Characterization Techniques” Book Review: This book describes synthesis of nanoparticles. It describes their characterization techniques. This helps to study structural, optical, magnetic properties of the particles. Methods like sol-gel, Solution Combustion have been described for synthesis. Green Synthesis, Modern Ayurvedic methods have also been included.

“Atmospheric Aerosols: Measurement and Characterization Techniques” Book Review: This book describes the basics of aerosols. The impact on the environment is also given. Methods for measurement and characterization are included. Estimation of aerosol optical depth (AOD) has been described. The results are used for aerosol radiative forcing through radiative transfer models. Results from Winter Phase Integrated Campaign, Trace Gases and Radiation Budget (W-ICARB) are included. Results have been compared with MISR, MODIS, TOMS. NCEP/NCAR Reanalysis, and HYSPLIT are used for comparison as well.

“Characterization of Solid Polymers: New techniques and developments” Book Review: This book covers different types of solid polymers with new techniques. Main chapters included are electron crystallography of linear polymers, new techniques in microscopy, X Ray studies using synchrotron radiation. Other chapters mentioned are neutron scattering techniques, next crystal infrared spectroscopy, Raman spectroscopy and mechanical properties. All the techniques are described in detail. Conclusions add at the end of every chapter for quick review purposes. Students studying advanced physics and mechanical engineering students can use this book. Recent developments of the field have been included in this book. These developments include atomic force microscopy. X-ray diffraction and electron microscopy are also included. With the use of neutron scattering, large data sets can be manipulated.

“Polymer Characterization Techniques and Their Application to Blends” Book Review: This book is based on different types of polymer techniques. These include thermal, rheology, mechanical, relaxational. Scattering, and spectroscopic analysis are also included. Applications are discussed comprehensively. Data analysis has also been described. Blending of polymers is the focus area of this book.

“Second-order Nonlinear Optical Characterization Techniques: An Introduction” Book Review: The subject is described as the theoretical aspect of the field. Extensive mathematics has been avoided. This is a multi-disciplinary book. This book introduces linear optics. It also describes incoherent second-harmonic generation. Surfaces and interfaces are covered later. Second-order imaging techniques are given in the final chapter. This includes confocal microscopy and two-photon excited fluorescence microscopy. This book can be used by scientists from many disciplines.

“Synthesis and Characterization Techniques” Book Review: This book describes the external techniques of characterization. This helps to study internal structure and properties of a material. This book can be used by researchers of materials science.

“Powder Metallurgy: An Advanced Technique Of Processing Engineering Materials” Book Review: The book is suitable for students interested in Chemistry Powder Metallurgy. The book explores a thorough coverage of various aspects of powder metallurgy involving raw materials, various methods of production of metallic powders and non-metallic powders, their characteristics, technological aspects of compacting and sintering, various applications of powder metallurgy technology. The book is used as a learning tool for the undergraduate students of metallurgical and materials engineering for a one semester course on powder metallurgy. The book includes Sections on mechanical comminution of solid materials, structural P/M parts, grinding in mills, disintegration of liquid metals and alloys, some more methods for the production of iron powder by reduction of oxides, metallothermic reduction of oxides, etc.

“Grafting/Characterization Techniques/Kinetic Modeling: Volume 137 (Advances in Polymer Science)” Book Review:The book is suitable for students interested in Grafting and characterisation or kinetic modeling. The book includes improved surface hydrophilicity, hydrophobicity, bio compatibility, conductivity, anti-fogging, anti-fouling, grazing, surface hardness, surface roughness, adhesion, lubrication, and antistatic property. The book also explains how The protein adsorption and attachment of biological components trigger a subsequent series of mostly adverse biological reactions toward the polymeric materials. The book also explains substances like adhesives, printing inks, and paints because they generally consist of polar compounds.

“Defects and Properties of Semiconductors: Defect Engineering (Advances in Solid State Technology)” Book Review: The book is mainly suited for students interested in physics semiconductors and for students pursuing in defect engineering. The book also describes defects and properties of semiconductors. The book also describes methods how to suppress generation of harmful defects during device processing in order to achieve a high yield of device fabrication. The book also includes techniques such as generation and development of defects desired depending on type of devices and degree of integration. Electrical, optical and mechanical effects of defects is also explained correctly.

“Advances in Acoustic Microscopy: Volume 1” Book Review: The book includes the principles of the contrast theory. The book also describes the role of surface acoustic waves, such as Rayleigh waves, dominates the contrast in most high­ resolution studies of many materials. The book is suitable for students interested in advance acoustics microscopy. The book also includes measuring Short Cracks by Time-Resolved Acoustic Microscopy, Probing Biological Cells and Tissues with Acoustic Microscopy , Lens Geometries for Quantitative Acoustic Microscopy etc.

“Structural Characterization Techniques: Advances and Applications in Clean Energy” Book Review: The book includes the principles of the contrast theory. The book also describes the role of surface acoustic waves, such as Rayleigh waves, dominates the contrast in most high­ resolution studies of many materials. The book is suitable for students interested in advance acoustics microscopy. The book also includes measuring Short Cracks by Time-Resolved Acoustic Microscopy, Probing Biological Cells and Tissues with Acoustic Microscopy , Lens Geometries for Quantitative Acoustic Microscopy etc.

“Advances in Photovoltaics: Part 2 (Semiconductors and Semimetals Book 89)” Book Review: The book is mainly suited for students interested in physics Polymers and for students pursuing in defect engineering. The book also describes defects and properties of semiconductors. The book also describes methods how to suppress generation of harmful defects during device processing in order to achieve a high yield of device fabrication. The book also includes techniques such as generation and development of defects desired depending on type of devices and degree of integration. Electrical, optical and mechanical effects of defects is also explained correctly.

“Chromatographic Characterization of Polymers: Hyphenated and Multidimensional Techniques” Book Review: The book is suitable for students pursuing polymer engineering. The book includes Emerging Mass Spectrometric Tools for Analysis of Polymers and Polymer Additives. Analysis of Polymer Additives and Impurities by Liquid Chromatography/Mass Spectrometry and Capillary Electrophoresis/Mass Spectrometry are also described in the book. Direct Insertion Probe Mass Spectrometry of Polymers, Mass Spectrometric Characterization and Polysaccharides and Their Derivatives, are explained in the book with in-depth information. Electrospray Ionization-Mass Spectrometry for Molecular Level Understanding of Polymer Degradation is also covered in the book.

“Advances in Characterization Techniques for Nanotoxicology” Book Review: The book is mainly suited for students interested in physics Polymers and for students pursuing in defect engineering. The book also describes defects and properties of semiconductors. The book also describes methods how to suppress generation of harmful defects during device processing in order to achieve a high yield of device fabrication. The book also includes techniques such as generation and development of defects desired depending on type of devices and degree of integration. Electrical, optical and mechanical effects of defects is also explained correctly.

“Grafting/Characterization Techniques/Kinetic Modeling (Advances in Polymer Science)” Book Review: The book is suitable for students interested in Grafting and characterisation or kinetic modeling. The book includes improved surface hydrophilicity, hydrophobicity, bio compatibility, conductivity, anti-fogging, anti-fouling, grazing, surface hardness, surface roughness, adhesion, lubrication, and antistatic property. The book also explains how The protein adsorption and attachment of biological components trigger a subsequent series of mostly adverse biological reactions toward the polymeric materials. The book also explains substances like adhesives, printing inks, and paints because they generally consist of polar compounds.

“Mass Spectrometry of Polymers – New Techniques (Advances in Polymer Science)” Book Review: The book is suitable for students pursuing polymer engineering. The book includes Emerging Mass Spectrometric Tools for Analysis of Polymers and Polymer Additives. Analysis of Polymer Additives and Impurities by Liquid Chromatography/Mass Spectrometry and Capillary Electrophoresis/Mass Spectrometry are also described in the book. Direct Insertion Probe Mass Spectrometry of Polymers, Mass Spectrometric Characterization and Polysaccharides and Their Derivatives, are explained in the book with in-depth information. Electrospray Ionization-Mass Spectrometry for Molecular Level Understanding of Polymer Degradation is also covered in the book.

“Analytical Techniques for Thin Film – Treatise on Material Science and Technology Vol. 27” Book Review: This book explains the analytical techniques 4th in films. Chapters included are submicron structure and micro analysis, synchrotron radiation photoemission studies of interfaces, esca, modern developments in soft x ray imaging. Other topics included are X Ray diffraction analysis of strains and stresses in thin films, X Ray diffraction analysis of diffusion in thin films. All the techniques and equations are described in detail in this book. Summary and references are added at the end of every chapter for quick review purposes. This book is useful for advanced physics students.

“Electron Microprobe Analysis” Book Review: This book discusses electron microprobe analysis and end scanning electron microscopy in geology. Main chapters included are electron specimen interactions, scanning electron microscopy, X Ray spectrometer, element mapping. Other topics included are X Ray analysis instrumentation end plate section. All the methods and techniques are described in a detailed manner. Students studying advanced physics can use this book.

“Physical Characterization of Pharmaceutical Solids” Book Review: This book contains the applications of material science techniques to the pharmaceutical field. Chapters discussed are overview of physical characterization methodology, ultra Violet visible diffuse reflectance spectroscopy, particle size distribution, micro metrics. Other chapters mentioned are particle morphology, vibrational spectroscopy, Xray powder diffractometry. In this book various pharmaceutical scientists have contributed. A total of 32 references are added in this book. Illustrations are provided to make the text easy. Students studying advanced level physics and chemical engineering students can use this book.

“Reactions and Characterization of Solids” Book Review: This book Mentions reactions and characterization of solids. Major chapters mentioned are crystal chemistry, preparing and characterizing materials in solid state, elementary thermodynamics, bond strength. Other topics mentioned are electronic and magnetic behaviour, fundamental properties, structural behaviour of real systems and working materials. Plenty of illustrations and examples are added in this book for easy understanding. Students studying chemical engineering and advanced chemistry can refer to this book.

“Crystalline and Non-Crystalline Solids: Preparation and Characterization” Book Review: This book includes research papers on different subjects of crystalline and non-crystalline solids. The chapters discussed are crystalline solids, semi crystalline solids, non-crystalline solids. Other topics mentioned are nanocrystals, polymer composites, glasses, kidney stone crystals. The text written in this book for every topic is quite descriptive and with proper illustrations. This book is useful for advanced chemistry and chemical engineering students.

“Preparation and Characterization of Nanoscopic Solid State Hydrogen Storage Materials” Book Review: This book Describes the knowledge regarding storing hydrogen in solid hydrates and its applications. Main chapters discussed are theoretical and experimental methods, electron beam induced dehydrogenation of mgh2, nano coefficients of Libh4 in aerogel like carbon. Conclusions of every chapter are discussed at the end. All the techniques and methods are described in detail. This book is useful for advanced physics and chemistry students.

“Characterization of Solid Constituents in Blackwater Effluents from Coal Preparation Plants” Book Review: This book mentions the techniques and characterization of solid constituents in Blackwater. Main chapters discussed are bicycle for better environment, health effects of increasing sulphur oxides emissions draft, women in environmental health. This book consists of multiple historical documents. This book is useful for advanced physics and chemistry students.

“Characterization of Solid Surfaces” Book Review: This book helps learning about characterization of solid surfaces determine the impurities in materials. The main chapters mentioned are multiple beam interferometry, Stylus techniques, electron microscopy, scanning electron microscopy. Other chapters discussed are field ion microscopy, X Ray diffraction methods, Electrochemical techniques. At the end of every chapter summary and Glossary are added for easy understanding of the topics. References are added for further reading process. Students studying advanced physics and chemistry can read this book.

“Materials Characterisation” Book Review: The book is a collaboration of various research papers presented at the Sixth International Conference on the topic ‘Materials modelling and characterisation’. It is recommended to students of higher level courses and researchers of the topic. Both experimental and computational concepts are dealt with. The papers presented cover a wide spectrum of topics including Computational models and experiments, mechanical characterisation and testing, micro and macro materials characterisation, corrosion problems, innovative experimental technologies, recycled materials, thermal analysis, advances in composites, cementitious materials, structural health monitoring, energy materials.

“Particulate Materials: Synthesis, Characterisation, Processing and Modelling” Book Review: The book includes numerous research papers presented at the UK-China Particle Technology Forum held at Birmingham in 2011. Engineers of various disciplines along with researchers and scientists can refer to this book. The contents of the book are broadly covered in four parts such as synthesis, characterisation, processing and modelling. The first part deals with the recent technological advances in synthesis techniques such as spray-pyrolysis, supercritical fluid synthesis assisted with ultrasound, continuous synthesis using supercritical water, hydrothermal synthesis of nano-particulate materials and jet milling. Further, characterisation strategies for both particle and system levels such as inhalation, filling, and consolidation are elucidated. Subsequent parts of the book deal with processing of materials such as capsule filling, micro-dosing, dry granulation, roll compaction and milling before dwelling into the analytical and advanced mathematical and numerical modeling.

“Materials Characterisation” Book Review: The book entails proceedings of the Fourth International Conference on Computational Methods in Materials Characterisation held in The New Forest, UK, in 2009. This book can be of use to researchers along with scientists of various domains carrying out studies in the field. Various papers presented at the conference whose main agenda was materials characterisation are included. Key topics such as Advances in Composites, Ceramics and Advanced Materials, Alloys; Cements, Biomaterials, Thin Films and Coatings, Imaging and Image Analysis, Thermal Analysis, New Methods, Surface Chemistry. Nano Materials, Damage Mechanics, Fatigue and Fracture, Innovative Computational Techniques, Computational Models and Experiments, Mechanical Characterisation and Testing are discussed.

“Computational Methods in Materials Characterisation” Book Review: The book is a corroboration of research papers presented at First International Conference on Material Characterisation. It targets both researchers and scientists of the field alike. Both computational methods and modeling is emphasised in this book. The papers presented a wide range of topics covering crucial aspects. Topics covered include parameter identification, optimisation of materials, thermomechanical behaviour, damage mechanisms, composites, foams, polymers, concretes, and interface phenomena.