Hydraulics Books

«
»

We have compiled the list of Best Reference Books on Hydraulics subject. These books are used by students of top universities, institutes and colleges. Here is the full list of best books on Hydraulics along with reviews.

Kindly note that we have put a lot of effort into researching the best books on Hydraulics subject and came out with a recommended list of best books. The table below contains the Name of these best books, their authors, publishers and an unbiased review of books on “Hydraulics” as well as links to the Amazon website to directly purchase these books. As an Amazon Associate, we earn from qualifying purchases, but this does not impact our reviews, comparisons, and listing of these top books; the table serves as a ready reckoner list of these best books.

List of Hydraulics Books with author’s names, publishers, and an unbiased review as well as links to the Amazon website to directly purchase these books.

1. Hydraulic Engineering

1. “Open Channel Hydraulics” by R H French

“Open Channel Hydraulics” Book Review: The chapters are based on topics like types of flow in open channels, law of conservation of energy, uniform flow, gradually and spatially varied flow, lined, unlined and grass-lined channels, and varied unsteady flow. The transport processes and Chezy and Manning equations are mentioned in this book. The techniques for calculation of the normal depth of flow in open channels are discussed. The process of designing and construction of physical models for examination of open-channel flow phenomena is highlighted. Many exercises, solved examples, and problems are added to the book. The book will be suitable for the graduate and undergraduate students of civil engineering, agricultural engineering and hydrologic science.

2. “Applied Mathematics in Hydraulic Engineering” by Mizumura

advertisement
advertisement
“Applied Mathematics in Hydraulic Engineering” Book Review: The book basically lays emphasis on mathematical problems in hydraulics. It introduces non-linear differential equations along with calculus and partial differential equations. The topics like differentiation, integration, vectors, tensor, Fourier series, and Laplace transformation are discussed in detail. Many advanced topics like complex functions, complex integrals, conformal mapping, special functions, wave and potential equations, linearization methods, and non-linear system analysis are also discussed. To provide readers with practical content it contains many real-life problems. The book will be helpful for the students and professors of hydraulic, hydrologic, civil and coastal engineering. It can also be used as a mathematical tool by the researchers of preceding fields.

3. “Experiments In Hydraulic Engineering” by Sarbjit Singh

“Experiments In Hydraulic Engineering” Book Review: The book begins with fundamental theory of hydraulics and then moves to explanation of the process of experiments included in hydraulic engineering. It contains detailed descriptions of performing experiments. The physical properties of water, air and common fluids are mentioned in this text. The book thus enables the students in verifying the theoretical principles with practical values. The book is basically for undergraduate students of civil and hydraulic engineering.

4. “Hydraulic Power Engineering; A Practical Manual On The Concentration And Transmission Of Power By Hydraulic Machinery” by George Croydon Marks

“Hydraulic Power Engineering; A Practical Manual On The Concentration And Transmission Of Power By Hydraulic Machinery” Book Review: The book consists of detailed and updated content on hydraulics. The principles of hydraulics are mentioned in it. The book contains topics like flow of water, hydraulic pressure, test load, packing for sliding surfaces, pipe joints, and controlling values. Some important machines and devices like platform lifts, workshop cranes, hydraulic accumulators and riverters, hand and power pumps, types of turbines, water wheels, and hydraulic engines are discussed. It contains many diagrams, illustrations, and examples.

5. “Fundamentals of Hydraulic Engineering Systems” by Ned H C Hwang

“Fundamentals of Hydraulic Engineering Systems” Book Review: The book is an excellent blend of theoretical and practical concepts of engineering hydraulics. It presents fundamental principles and their applications in hydraulic engineering systems. The solutions of many engineering problems are included in this textbook. The initial chapters feature topics like fundamentals properties of water, water pressure and pressure forces, water flow in pipes, pipelines and pipe networks, water pumps, and water flow in open channels. The later section of the book describes groundwater hydraulics, hydraulic structures, water measurements, hydraulic similitude and model studies, hydrology for design, and graphical flow nets. The book will be an asset for students and practicing engineers of hydraulic engineering.

6. “Fundamentals of Hydraulic Engineering Systems” by Houghtalen

“Fundamentals of Hydraulic Engineering Systems” Book Review: The book is written from both theoretical as well as practical point-of-view. Along with the fundamental theory of hydraulics, the book presents practical approaches for solving various engineering problems. The most important topics of hydraulics namely hydrostatics, pipe flow, pipelines, pipe networks, pumps, open channel flow, hydraulic structures, water measurement devices, hydraulic similitude and model studies are thoroughly explained. The book also features chapters based on groundwater, deterministic hydrology and statistical hydrology.

advertisement
7. “Nuclear Thermal Hydraulics (An Advanced Course in Nuclear Engineering)” by Hajime Akimoto and Yoshinari Anoda

“Nuclear Thermal Hydraulics (An Advanced Course in Nuclear Engineering)” by Hajime Akimoto and Yoshinari Anoda Book Review: This volume provides fundamentals of nuclear thermal–hydraulics for reactor design and safety assessment. It also describes the basis for assessing cooling performance of nuclear reactors under accidental conditions. The descriptions in this book are virtually self-contained, beyond the assumption that readers are familiar with the introductory levels of nuclear engineering. This book helps readers understand the processes for nuclear reactor plant design and the most important factors in nuclear thermal-hydraulics.kimoto and Yoshinari Anoda.


2. Advance Hydraulics and Hydraulic Machinery

1. “Advances in Hydroinformatics (Springer Hydrogeology)” by Philippe Gourbesville and Guy Caignaert

advertisement
“Advances in Hydroinformatics (Springer Hydrogeology)” Book Review: This book is designed for the students, researchers and scientists. The topics which are covered in this book are flood management, natural resources preservation, and innovation in numerical methods. It also discusses the hydraulic machineries. It also discusses the modelling for marine, river & urban hydraulics.

2. “Fluid Machinery: Hydraulic Machines” by Sadhu Singh

“Fluid Machinery: Hydraulic Machines” Book Review: This book is designed for the B.E/B.tech students, researchers and scientists. The topics which are covered in this book are fluid machinery, whirling of fluids and hydro power generation fundamentals. It also explains the information about francis turbine, kaplan turbine and draft tube and cavitation. It also consists of examples, exercises, mcqs and summery at the end of the chapter.

3. “Hydraulic Machines: Fluid Machinery” by R K Singal and Mridual Singal

“Hydraulic Machines: Fluid Machinery” Book Review: It is designed for the students of civil, electrical, hydraulics and power engineering. It is divided into 13 chapters. The topics which are covered in this book are fundamentals of fluid flow, turbines, pumps, systems and power plants. Along with theoretical portions it also covers the practical applications of it. It consists of solved examples, numericals and mcqs at the end of the chapter.

4. “Vibration of Hydraulic Machinery (Mechanisms and Machine Science)” by Yulin Wu and Shengcai Li

“Vibration of Hydraulic Machinery (Mechanisms and Machine Science)” Book Review: This book is designed for the students, researchers and scientists. It discusses hydraulic machinery, such as turbines and pumps. It basically deals with vibration of hydraulic machinery. It discusses the topics with the help of flowcharts and diagrams. It also explains the mechanism of hydraulic machinery. It focuses on the fluid–structure coupled analysis.

5. “Five Hundred and Seven Mechanical Movements: Dynamics, Hydraulics, Hydrostatics, Pneumatics, Steam Engines, Mill and Other Gearing” by Henry T Brown

“Five Hundred and Seven Mechanical Movements: Dynamics, Hydraulics, Hydrostatics, Pneumatics, Steam Engines, Mill and Other Gearing” Book Review: This book is basically designed for the students of mechanical engineering, researchers and scientists. It deals with dynamics, hydraulics, hydrostatics, steam engines and other gearing. The topics which are covered in this book are engine disks, cranks, gasometer, gear and steering. It consists of solved examples, exercise and mcqs at the end of the chapter. Along with theoretical aspects it also consists of practical applications of mechanical movements.

6. “Hydraulic Servo-systems: Modelling, Identification and Control (Advances in Industrial Control)” by Mohieddine Jelali and Andreas Kroll

“Hydraulic Servo-systems: Modelling, Identification and Control (Advances in Industrial Control)” Book Review: This book is designed for the students of mechanical engineering, researchers and scientists. It basically deals with hydraulics servo-system. It also focuses on the strategies for hydraulic servo-systems. It also explains the theoretical and experimental modelling of hydraulic servo-systems. It also discusses the principles, benefits and limitations of hydraulic servo-systems.

7. “Hydraulics and Fluid Mechanics Including Hydraulics Machines” by S M Seth and Dr P N Nodi

“Hydraulics and Fluid Mechanics Including Hydraulics Machines” Book Review: This book is designed for the students of mechanical engineering, researchers and scientists. It explains the mechanism of hydraulics and fluid mechanics. The topics which are covered are fluid pressure, hydrostatic forces and laminar flow. It also explains the equations of motions and energy equations. The properties of fluids are also discussed. It contains solved examples and problems with solutions at the end of the chapter. This book is a detailed study of SI units in hydraulics and fluid mechanics. It starts with basic concepts that include properties of fluids, fluid pressure and its measurements, hydrostatic forces on surfaces, buoyancy and floatation etc. Then it goes on to include separate chapters on the flow of fluids such as flow through orifices and mouthpieces, flow over notches and weirs etc. The book also covers some technical topics such as impact of free jets, hydraulic turbines, reciprocating pumps, centrifugal pumps etc. In addition, it contains several questions from previous year university and competition exams that makes the book important for students preparing for engineering services, AMIE and ICS exams.
8. “Fluid Mechanics and Hydraulic Machines” by Rajput R K

“Fluid Mechanics and Hydraulic Machines” Book Review: This book is designed for the students of mechanical, aeronautical engineering and researchers. It focuses on the properties of fluid mechanics, fluid dynamics, flow over notches. It also explains the centrifugal and reciprocating pumps. It discusses the pipe turbulent flow. The mechanism of fluid and hydraulics machines are also covered. It also consists of solved examples, exercises and mcqs at the end of the chapter.

9. “Hydraulic Machines Including Fluidics” by Lal J

“Hydraulic Machines Including Fluidics” Book Review: This book is designed for the students of mechanical, aeronautical engineering and researchers. It basically deals with the hydraulic machines. There are 17 chapters which are discussed in this book. It provides the idea of the use of flowing fluids. It explains the reciprocating pumps & centrifugal pumps. Along with the theoretical portions it also covers the practical applications of hydraulic machines. It consists of solved examples, exercises and mcqs at the end of the chapter.

10. “Fluid Mechanics and Hydraulic Machines: Problems and Solutions” by K Subramanya

“Fluid Mechanics and Hydraulic Machines: Problems and Solutions” Book Review: This book is designed for the students of mechanical, aeronautical engineering and researchers. It basically deals with the fluid and hydraulic machines. The principles, limitations and applications of fluid mechanics and hydraulic machines are covered. It consists of solved examples, exercises and objective questions at the end of the chapters.

10. “Free-Surface Hydraulics” by Dr J M Townson

“Free-Surface Hydraulics” Book Review: This book contains information of research likely to be undertaken in the respective field of freshwater aquaculture. The book will be useful for the scientists, teachers and extension workers engaged in this field. The book deals with practically almost all the sectors of freshwater aquaculture and contains up-to-date information and throws game light on the future line of research likely to be undertaken in the respective field of freshwater aquaculture. The book will be a needed requirement of the scientists, teachers and extension workers engaged in this field.


3. Hydraulics and Pneumatics

1. “Fluid Power with Applications” by Anthony Esposito

“Fluid Power with Applications” Book Review: This textbook focuses on the various components of fluid power systems, which includes hydraulic systems, pneumatics and fluid logic control systems. The textbook contains a total of seventeen chapters covering the various areas of fluids and hydraulics and their application. The coverage of the book includes Hydraulic Pumps, Energy and Power in Hydraulic Systems, Physical Properties of Hydraulic Fluid, Hydraulic Valves, Maintenance of Hydraulic Systems, Fluid Logic Control Systems etc. Each chapter wraps up with a summary of key equations and an exhaustive exercise for extensive practice.

2. “Pneumatics and Hydraulics” by Andrew Parr

“Pneumatics and Hydraulics” Book Review: This textbook intends to provide guidance on operation of hydraulic and pneumatic systems. The book is written in a simple and lucid manner and mathematical treatment has been avoided to make the book easily understandable and less rigorous. It contains a total of nine chapters covering various concepts and topics such as Safety, Fault finding and Maintenance, Sequencing Applications, Hydraulic and Pneumatic Accessories, Actuators, Control Valves etc. It also demonstrates use of simulation software for the purpose of maintenance of the systems. The book can serve as a basic guide for technicians and engineers to get an insight into the components and operations of fluid systems.

3. “Oil Hydraulic Systems – Principles and Maintenance” by S R Majumdar

“Oil Hydraulic Systems – Principles and Maintenance” Book Review: This textbook discusses the fundamentals of hydraulic systems with focus on oil hydraulic systems. It is organized into a total of fifteen elaborate chapters. Some of the chapters present in the book are Hydraulic Piper, Hoses and Fittings, Seals and Packings, Design of Hydraulic Circuits, Heat Generation in Hydraulic System, Linear Actuators, Flow and Pressure Control etc. The textbook is majorly theoretical in nature but mathematical formulas are also sufficiently included wherever necessary. Each concept or theory is explained with sufficient number of diagrams, figures, circuit diagrams and schematics.

4. “Fundamentals of Pneumatic Control Engineering” by J P Hasebrink and R Kobbler
5. “Hydraulics and Pneumatics” by Jagadeesha T

“Hydraulics and Pneumatics” Book Review: This textbook provides an overview of the basic principles of hydraulics and pneumatics. It provides a basic understanding on the application of hydraulics and pneumatics in engineering problems, the numerical manipulations and the magnitude of various parameters that occur in this subject. It contains a number of solved question papers to give readers a clear understanding of the type of questions asked in the examinations and for better practice in general. Ample number of numerical problems has also been included for concrete comprehension. The textbook can benefit undergraduate and postgraduate students in mechanical, production, automobile, and mechatronics engineering.

6. “Fluid Power: Hydraulics and Pneumatics” by James R Daines

“Fluid Power: Hydraulics and Pneumatics” Book Review: The book provides the fundamentals of fluid power with stress on design and operation of hydraulic and pneumatic components, circuits and systems. It provides extensive coverage of both hydraulic and pneumatic systems and detailed explanation of fluid power fields. The book focuses more on the application of mathematical formulas and keeps the flavor of overall text considerably theoretical and simple to understand for undergraduate students. The textbook also includes application of simulation software to promote modern computational techniques and give students a taste of laboratory activities by creating their own designs.

7. “Essential Hydraulics: Fluid Power – Basic” by M Winston

“Essential Hydraulics: Fluid Power – Basic” Book Review: This textbook serves as an essential guide for those who have absolutely no background in hydraulic systems or fluid power systems. It provides the basic fundamental concepts surrounding the hydraulic systems and fluid power. The coverage of the book includes three chapters dedicated to covering the basics of oil hydraulics and the rest of the book maintaining a balance of basic hydraulic coverage and applications of hydraulic power systems for machineries and equipment. The chapters are supplemented with a step-by-step solution approach as well as calculations and illustration of hydraulic components and their symbols.

8. “Pneumatics and Hydraulics” by Harry L Stewart

“Pneumatics and Hydraulics” Book Review: The textbook comprehensively covers various aspects of pneumatics and hydraulics. It provides detailed explanations for various installations using step-by-step circuit analysis and elaborately discusses power checking, hydrostatic transmission, fluid motors, and hydraulic servo mechanisms. The coverage of the text also includes uses of fluid power and the symbols, principles, installation, operation, and maintenance of pneumatic and hydraulic devices and components. The book can benefit undergraduate and postgraduate students in mechanical engineering, production engineering and related fields.

9. “Mobile Hydraulics Manual” by Eaton Hydraulics Training

“Mobile Hydraulics Manual” Book Review: This textbook covers the various aspects of mobile hydraulics and theory in great detail. It starts from the fundamentals of the basic fluid mechanism to the advanced hydraulic concepts. The coverage of the book includes all major concepts, including basic hydraulic theory, basic electrical theory, hydrostatic transmissions, and steering, and fixed and variable displacement pumps. Thus, a reader needs no prior background in hydraulics to be able to study this book. The theory is supported by a number of diagrams, illustrations, examples and schematics. The textbook can be helpful for undergraduate students in mechanical engineering and related fields.

10. “Five Hundred and Seven Mechanical Movements: Embracing All Those which are Most Important in Dynamics, Hydraulics” by Henry T Brown

“Five Hundred and Seven Mechanical Movements: Embracing All Those which are Most Important in Dynamics, Hydraulics” Book Review: The textbook covers a large number of concepts starting from engineering principles to Otis’s elevator safety stop, Colt’s revolver action, and Ferguson’s mechanical paradox. Some of the chapters covered in the book are Shears, Seesaw, Tongs, Lifting, Trap, steam, Wheels, crown, Gasometers, Gauges, pressures, Jack, hydrostatic, Epicyclic Trains, Cranks, Drums and Rope, Chasers and Clutches etc. The index of the textbook contains the various movements covered in the book in an alphabetically sorted manner. Thus, instead of finding a chapter, you can directly jump to a certain mechanical movement or concept. Each mechanism is illustrated with clear diagrams and elaborates explanation on its use and operation. The book can be of interest to mechanical students and mechanics enthusiasts in general.

11. “Engineering Applications of Pneumatics and Hydraulics” by Ian C Turner

“Engineering Applications of Pneumatics and Hydraulics” Book Review: This textbook covers the basics of pneumatics and the applications of pneumatics and hydraulics in industry. The textbook contains a total of fifteen chapters. Some of the chapters present in the book are Basic Principles of Fluid Power systems, Actuators, Fluid Power Measurement Systems, Troubleshooting and Maintenance, Health and Safety at Work, Emergency Shutdown and Safety Systems etc. The textbook can serve as a relevant reference guide for engineering students as well as practicing engineers. The material is presented in practical and easily understandable format with a number of circuit diagrams and well illustrated examples wherever necessary.

12. “Industrial Hydraulics” by John J Pippenger


4. Hydraulic, Pneumatic and Fluidic Controls

1. “Fluid Power Control” by J F Blackburn

“Fluid Power Control” Book Review: This book provides a fundamental overview of basic concepts in the field of hydraulics and pneumatics. It covers various components of fluid power control systems in detail like pumps, cylinders, valves, seals, gauges, sensors and many more. It contains numerous diagrams, graphs, and numerical calculation to help the reader understand the concepts. It is designed with focus on students, teachers, and professionals in the field of mechanical, chemical, petroleum, and other engineering and sciences.

2. “The Analysis and Design of Pneumatic Systems” by B W Anderson

“The Analysis and Design of Pneumatic Systems” Book Review: This book is designed to focus on students and professors pursuing post-graduate courses in the field of mechanical, chemical, and other engineering. It provides detailed overview on pneumatics, basic mechanics of compressible flow, basic tools to perform efficiency, design pneumatic components and systems and much more. The reader is expected to have basic knowledge of the subject as a prerequisite. The book contains numerous equations, methods of solution, worked-out numerical examples, unsolved numerical examples and summary to enhance understanding of the reader.

3. “Fluidic Components and Circuits” by K Foster and G Parker

“Fluidic Components and Circuits” Book Review: This book provides overview on fluid components and circuits. It covers topics like introduction to control systems, types of control system and their utility, hydraulic power generation and transmission, pneumatic values and much more. It also focuses on circuit design, lumped and distributed parameter fluid systems, pure fluid analog amplifiers, analog signal control technique and many others. The author expects the reader to have fundamental knowledge in the subject. It is designed mainly for students and teachers of post-graduate courses in the field of mechanical, chemical, automobile, petroleum, and other engineering.

4. “Fluid Power Systems” by A B Goodwin

“Fluid Power Systems” Book Review: This book covers in-depth the topic of fluid power systems. It provides basic and in-detail knowledge on various aspects of hydraulics and pneumatics. It is written in an easy to understand language. It is well-structured by providing theory, solved and unsolved problems, real-world examples, and solutions. It provides the reader with techniques to handle real-world problems. The book is designed mainly focusing on students and teachers in the field of engineering and science who need to learn fluid power systems.

5. “Fluid Power Control : Hydraulics and Pneumatics” by Ahmed Abu Hanieh

“Fluid Power Control : Hydraulics and Pneumatics” Book Review: This book is designed to focus on students and professors pursuing graduate and post-graduate courses in the field of mechanical, chemical, and other engineering and science. The author expects the reader to have basic knowledge on the subject as a prerequisite. It covers the design of components of hydraulic and pneumatic systems. It provides theoretical and practical understanding of fluid power systems. The book contains several diagrams, graphs, equations solved and unsolved problems to enhance understating of the reader.

6. “Hydraulic Power System Analysis” by Richard Smith

“Hydraulic Power System Analysis” Book Review: This book covers the modern computer-aided analytical techniques used to model linear and non-linear aspects of dynamic hydraulic power systems. It is written in an easy to understand language. It talks about various relevant fluid properties, energy calculations, and steady state and dynamic analysis along with a review of automatic control theory. It provides numerous solved and unsolved examples, equations and calculations to enhance understanding of the subject. The book is focused on students, teachers, and professionals in the field of mechanical, chemical, petroleum engineering and science.

7. “Noise Control of Hydraulic Machinery” by Skaistis

“Noise Control of Hydraulic Machinery” Book Review: This book focuses on hydraulic machinery and various components of the machinery. It provides basic overview on different terminologies used in noise control of hydraulic machinery like sound, vibration, isolation, fluid pulsations, cavitation, shock and much more. It is written in an easy to understand language with numerous real-world examples. It provides tools for the reader to design hydraulic machines with noise control. The book is primarily designed for graduate students in various fields of engineering and sciences.

8. “System-Specific Pi Control Theory for Fluid and Motion Systems” by I Krakow Kalman

“System-Specific Pi Control Theory for Fluid and Motion Systems” Book Review: This book provides a fundamental overview of system specific pi control theory for fluid and motion systems. It describes methods to achieve analytical tuning of fluid and motion systems. It enables the reader to design systems keeping in mind various parameters like PI coefficients, modulated capacities, update intervals, system response characteristics and much more. It provides numerous real-world design problems, methods to analyze them and provide meaningful solutions. The book is designed mainly for graduate and post-graduate students in various fields of engineering and sciences.

9. “Channels and Channel Control Structures: Proceedings of the 1st International Conference on Hydraulic Design in Water Resources Engineering” by K V H Smith

“Channels and Channel Control Structures: Proceedings of the 1st International Conference on Hydraulic Design in Water Resources Engineering” Book Review: This book focuses on fundamentals of hydraulic design and its application in the field of water resources engineering. It covers topics like control structures, systems of irrigation, drainage, water supply channels and much more. It covers computer-aided techniques for analysis and design of channel and channel control structures for hydraulic design. It provides deep insight into hydraulic design in open channel flow and open channel control structures. The book is designed for post-graduate students in the field of water resource engineering and expects the reader to have basic knowledge of hydraulic design.

10. “Fluid Power Design Handbook” by Franklin D Yeaple

“Fluid Power Design Handbook” Book Review: This book is a design handbook for students, teachers in various fields of engineering and professionals who work on fluid power design on a daily basis. It covers methods to maintain and enhance standards and features of fluid power components in hydraulic or pneumatic systems. It provides insights into microprocessor control, smart actuators, virtual displays, position sensors, computer aided design, performance testing and much more. The book is written in an easy to understand manner and contains numerous solved and unsolved problems.


5. Applied Hydraulics, Pneumatics and Fluid Machines

1. “Applied Hydraulics and Pneumatics in Industry” by J R Fawcett
2. “Applied Hydraulics in Engineering” by Henry M Morris and James M Wiggert
3. “Handbook of Applied Hydraulics” by V Calvin Davis and K Sorenson

“Handbook of Applied Hydraulics” Book Review: This book covers different concepts of applied hydraulics from basic hydrology to water treatment. It gives numerous examples on how to use the material on all important applied hydraulics topics. The book provides 41 new chapters which addresses current problems in hydraulics. It explains various topics including canals, conduits, tunnels and shafts, roller compacted concrete dams, environmental aspects and fish facilities. It also includes hydroelectric plants, water distribution and treatment, wastewater conveyance and treatment.

4. “Applied Hydraulics: Practical Hydraulics for Technology” by J D Karen
5. “Vectors, Tensors and the Basic Equations of Fluid Mechanics” by Rutherford Aris

“Vectors, Tensors and the Basic Equations of Fluid Mechanics” Book Review: This textbook demonstrates and uses mathematical concepts to illuminate physical theories. It is designed for engineers, physicists and applied mathematicians at advanced graduate and undergraduate levels. It explains the required background material, then continues to explore the algebra and calculus of Cartesian vectors and tensors. It covers topics such as the kinematics of fluid motion, stress in fluids, equations of motion and energy in Cartesian coordinates, tensors, and equations of fluid flow in Euclidean space. At the end, the book illustrates the geometry of surfaces in space, the equations of surface flow and equations for reacting fluids. It provides numerous exercises providing various opportunities for manipulation and understanding of the concept included.

7. “Applied Hydraulics and Pneumatics” by Dr V Jayakumar
8. “Computational Hydraulics: Numerical Methods and Modelling” by Ioana Popescu

“Computational Hydraulics: Numerical Methods and Modelling” Book Review:This is a conceptual book on the subject. It illustrates the concept of modelling and various numerical methods and analysis to modelling. It provides a short and complete overview of hydraulic principles, and the problems considered by these principles in the aquatic environment. The book covers different flow equations, numericals and analytical solutions. It provides the required steps for building and applying numerical methods in hydraulic comprise. It continues with the report of different example applications of computational hydraulics. The book included both theory and exercises which helps to learn concepts within the academic environment. It is designed for undergraduate and graduate students, researchers, members of governmental and non-governmental agencies and professionals involved in management of water related issues.


6. Fluid Mechanics and Hydraulics

1. “Hydraulics and Fluid Mechanics” by Modi P N and Seth S M

“Hydraulics and Fluid Mechanics” Book Review: This book is a detailed study of SI units in hydraulics and fluid mechanics. It starts with basic concepts that include properties of fluids, fluid pressure and its measurements, hydrostatic forces on surfaces, buoyancy and floatation etc. Then it goes on to include separate chapters on the flow of fluids such as flow through orifices and mouthpieces, flow over notches and weirs etc. The book also covers some technical topics such as impact of free jets, hydraulic turbines, reciprocating pumps, centrifugal pumps etc. In addition, it contains several questions from previous year university and competition exams that makes the book important for students preparing for engineering services, AMIE and ICS exams.

2. “A Textbook of Fluid Mechanics and Hydraulic Machinery” by Bansal R K

“A Textbook of Fluid Mechanics and Hydraulic Machinery” Book Review: This book covers many important topics related to fluid mechanics and hydraulic machinery. In the beginning it describes properties of fluids, pressure and its measurement, hydrostatic forces on surfaces, buoyancy and floatation and other basic topics. Then it goes on to include separate chapters on kinematics of flow and ideal flow, dynamics of fluid flow, viscous flow , turbulent flow and flow through pipes. At last objective type questions are given for the students to test their understanding of the subject matter. The diagrams and pictures help in technical understanding of the subject. The book is useful for students preparing for competitive examinations and for those studying civil engineering at colleges.

3. “Fluid Mechanics through Problems” by R J Garde

“Fluid Mechanics through Problems” Book Review: This book introduces the readers to the important subject of fluid mechanics. The seventeen chapters of the book include topics like Fluid Properties, Dynamics, Dimensional Analysis, Kinematics, Laminar Flow, Turbulent Flow etc. The book describes properties of fluids along with their kinematics of flow with the help of topics such as fluid statics, Bernoulli’s theorem, equation of motion and momentum equation. It explains the principles of fluid mechanics in a more practical manner with the application of these principles in solving engineering problems. The topics are illustrated with diagrams and pictures to help the students understand the subject clearly. The book is designed for undergraduate and graduate students studying fluid mechanics in an engineering course.

4. “Fluid Mechanics: Including Hydraulic Machines” by A K Jain

“Fluid Mechanics: Including Hydraulic Machines” Book Review: This book contains a comprehensive coverage of fluid mechanics and hydraulic machinery. The seventeen chapters deal with basic concepts of fluid mechanics and other important aspects of fluids. The topics are explained with the help of illustrations, pictures, diagrams that help the students understand the subject in a practice-oriented manner. The objective type questions and questions from previous year examinations help the students prepare for university and competitive exams.

5. “Textbook of Fluid Mechanics and Hydraulic Machines” by Sukumar Pati

“Textbook of Fluid Mechanics and Hydraulic Machines” Book Review: This book contains a detailed coverage of important topics in hydraulic machines. In the beginning it includes topics such as turbines, centrifugal and reciprocating pumps. Then it goes on to describe miscellaneous hydraulic machines such as hydraulic press, accumulator, intensifier, ram, lift and crane. A detailed discussion on kinematics and dynamics of Fluid Flow, laminar, turbulent and compressible flow is also included in the book. It contains 600 solved examples, 365 numerical problems along with other questions to help the students prepare for examinations and test their understanding of the subject. Theoretical explanations and mathematical derivations are included along with illustrations to make the learning easier. The book will benefit students of engineering subjects and those who wish to appear in different competitive exams.

6. “Fluid Mechanics and Hydraulics (Schaum’s Outline Series)” by Ranald Giles and Jack Evett

“Fluid Mechanics and Hydraulics (Schaum’s Outline Series)” Book Review: This book covers all the important aspects of fluid mechanics. It includes 622 fully solved problems to help the readers understand the subject in a clear and concise manner. The book contains a detailed description of Introduction to Fluid Dynamics, Introduction to Hydraulics, Fluid Mechanics, Statics and Mechanics of Materials. In addition, it contains detailed explanations of free-body analysis, vector diagrams, the principles of work and energy and impulse momentum and Newton’s laws of motion. Separate chapters on fluid statics and the flow of compressible fluids are also included. The practical examples of proofs of theorems and derivations of formulas help in a thorough understanding of the subject. The book is a useful learning source for students in engineering courses and for those appearing for competition exams.

7. “Fluid Mechanics: Hydraulics” by A K Upadhyay

“Fluid Mechanics: Hydraulics” Book Review: This book covers many important topics related to fluid mechanics and hydraulic machinery. In the beginning it describes properties of fluids, pressure and its measurement, hydrostatic forces on surfaces, buoyancy and floatation and other basic topics. Then it goes on to include separate chapters on kinematics of flow and ideal flow, dynamics of fluid flow, viscous flow , turbulent flow and flow through pipes. At last objective type questions are given for the students to test their understanding of the subject matter. The diagrams and pictures help in technical understanding of the subject. The book is useful for students preparing for competitive examinations and for those studying civil engineering at colleges.

8. “Fluid Mechanics and Hydraulic Machines” by Goyal M K

“Fluid Mechanics and Hydraulic Machines” Book Review: This book provides a detailed understanding of basic concepts and methods of fluid mechanics and hydraulic machines. The sixteen chapters of this book include conceptual aspects of fluid mechanics and the application based working of hydraulic machines. It comes with a set of theoretical questions and numerical problems at the end of each chapter. The summary present at the end of each chapter highlights the key points and examples help in application based understanding of fluid mechanics. The book also includes previous year questions from competition exams that help the students in preparing for these exams. It will be useful for the undergraduate students of civil, mechanical, chemical and aeronautical engineering.

9. “Fluid Mechanics and Hydraulic Machines Lab Manual” by Damodara Reddy Annapureddy

“Fluid Mechanics and Hydraulic Machines Lab Manual” Book Review: This book provides a basic knowledge of fluid mechanics and machinery. It focuses on problems involving flow of fluids in aerodynamics, force of fluid on structural surfaces and fluid transport. The aim of this lab manual is to help the students understand how to apply scientific knowledge to find solutions for problems of practical importance. The experiments are explained in a step-by-step manner with diagrams and well-labelled pictures to make the learning experience more convenient for students. The manual is designed for students in degree courses in Mechanical, Chemical, and Electrical and Electronics Engineering.


7. Design of Hydraulic and Pneumatic Systems

1. “Principles of Hydraulic Systems Design, Second Edition” by Peter Chapple

“Principles of Hydraulic Systems Design, Second Edition” Book Review: Fluid power systems are manufactured by many organizations for a very wide range of applications,exemplifying various courses of action of segments to satisfy a given undertaking. Pressure driven segments are made to give the control capacities needed to the activity of a wide scope of frameworks and applications. This subsequent version is organized to give a comprehension of: Essential kinds of parts, their operational standards and the assessment of their exhibition in an assortment of utilizations. A resume of the stream measures that happen in water powered parts. A survey of the displaying interaction for the proficiency of siphons and engines. This new release likewise incorporates a total examination for assessing the mechanical misfortune in a run of the mill pressure driven engine; how circuits can be masterminded utilizing accessible parts to give a scope of useful framework yields, including the investigation and plan of shut circle control frameworks and a few applications; a portrayal of the utilization of worldwide guidelines in the plan and the board of pressure driven frameworks; and broad examination of pressure driven circuits for various sorts of hydrostatic influence transmission frameworks and their application.

2. “Design of Piping Systems” by M W Kellogg Company

“Design of Piping Systems” Book Review: This title made accessible unexpectedly an enough coordinated, thorough logical strategy for assessing the burdens, responses and avoidances in an unpredictable funneling framework in space, limitless regarding the character, area or number of concentrated loadings or limitations. Lavishly represented and fastidiously itemized.

3. “Pneumatic Drives: System Design, Modelling and Control” by Peter Beater

“Pneumatic Drives: System Design, Modelling and Control” Book Review: The plan to utilize air for communicating power is old. Ctesibius in – cient Greece portrayed a launch utilizing pneumatic chambers to initially store energy and afterward quickly quicken a bolt. Heron of Alexandria dev-oped programmed sanctuary entryways which opened and shut by methods for hot air. Also, from the Greek word for breath he instituted the term that was utilized as title for his book and today portrays an entire industry: – pneumatics. Pneumatic parts and frameworks have become a significant point for course books. Most have their emphasis on the portrayal of the consistent state – haviour, functional issues like investigating or Boolean variable based math to help planning control calculations. A couple of course readings covering the theore-cal examination and plan of pneumatic frameworks have been distributed. Yet, they were composed when computerized PCs were not effectively free to en-neers and in this manner contain not much material about demonstrating and reproduction. This book attempts to overcome any issues between logical orders (liquid mechanics, thermodynamics, arithmetic, control, and so forth), the traditional way to deal with portray pneumatic parts and frameworks by their stea-state conduct, the wish of a plan architect to test his plan previously – tually constructing equipment and the subsequent requirement for numerical models to utilize the present ground-breaking advanced PCs.

4. “Design of All Terrain Mobile Cranes for Required Capacities” by Naveen Daham Weerasekera and Laksman Perera

“Design of All Terrain Mobile Cranes for Required Capacities” Book Review: Pneumatic passing on is perhaps the most mainstream strategy for dealing with mass powdered and granular materials in mining, substance and agrarian enterprises. This third release of this fruitful book covers both hypothetical and viable parts of the subject. It is novel in its mixing of scholastic materials and great modern plan procedures. Every theme is canvassed top to bottom, with accentuation put on the most recent strategies, equipment frameworks and plan and exploration procedure. Its exhaustive worked models and tables guarantee that the peruser need not counsel some other reference material.In this third release new segments on reproduction and displaying have been added, while the utilization of tomography as an apparatus for checking pneumatic passing on is likewise covered.

5. “Analysis and Design of Pneumatic Systems” by Blaine W Andersen

“Analysis and Design of Pneumatic Systems” Book Review: This title looks for: to clarify the fundamental mechanics of compressible stream; to figure general strategies for starter assessment and itemized plan examination of pneumatic segments and frameworks; and to give essential devices needed to play out this investigation productively.

6. “Pneumatic Conveying of Solids: A theoretical and practical approach (Particle Technology Series)” by G E Klinzing and F Rizk

“Pneumatic Conveying of Solids: A theoretical and practical approach (Particle Technology Series)” Book Review: Pneumatic passing on is quite possibly the most famous techniques for dealing with mass powdered and granular materials in mining, substance and horticultural ventures. This third version of this effective book covers both hypothetical and commonsense parts of the subject.It is novel in its mixing of scholastic materials and great modern plan methods. Every point is canvassed top to bottom, with accentuation set on the most recent procedures, equipment frameworks and plan and examination technique. Its far reaching worked models and tables guarantee that the peruser need not counsel some other reference material.

7. “Modern Plumbing” by E Keith Blankenbaker

“Modern Plumbing” Book Review: Movement Control discovers applications in some seaward, subsea and digging establishments. Movement Control is constantly founded on a mix of mechanical-, electrical-and water powered drive frameworks along with control methods. The book gives the fundamental hypothesis of water powered controls, conduct of water powered liquids, pressure driven segment capacities, boundary choices, estimation of essential water driven frameworks and fundamental hypothesis of electrical drives: offbeat engines with recurrence drives. Aside from the hypothetical foundation on the drive standards, numerous new reasonable applications are given on the plan of drive and control procedures for the seaward and digging industry, for instance, the plan of the saw that needed to cut the nose from the Russian submarine “Kursk” before it very well may be rescued from the seabed. Unique consideration is given to the static and dynamic conduct of powerfully and electrically determined frameworks, the conduct of criticism control frameworks with the leftover elements and correctness that can be acquired. Numerous models are given of introduced drives for seaward applications, pipe tensioners, pipe dealing with gear, pipe-lay pinnacles. Itemized data is introduced on dynamic and latent hurl compensators for cranes, remote ocean establishments, access frameworks pull dredgers and the plan of high pressing factor gas gear in these frameworks.

8. “Principles of Hydraulic System Design” by Peter J Chapple
9. “Rubber Seals for Fluid and Hydraulic Systems (Plastics Design Library)” by Chellappa Chandrasekaran

“Rubber Seals for Fluid and Hydraulic Systems (Plastics Design Library)” Book Review: Elastic Seals for Liquid and Pressure driven Frameworks is an exhaustive manual for the assembling and utilizations of elastic seals, with fundamental inclusion for industry areas including avionics, oil boring and the car business. Liquid spillage costs industry a great many dollars consistently. Notwithstanding squandered cash, unattended breaks can bring about personal time, influence item quality, dirty the climate, and cause injury. Fruitful fixing includes regulation of liquid inside a framework while barring the toxins; the flexibility of elastic empowers it to be utilized to accomplish these two destinations and make a tight fixing impact. A sound comprehension of the intricate elements engaged with fruitful liquid fixing is fundamental for engineers who determine, plan, work and keep up hardware and mechanical gear. This book centers around the attributes of rubbers as seals, their assembling methods, the ramifications of their physical and compound qualities for the fixing capacity in the liquid and water driven frameworks, how rubbers seal and forestall spills, what properties are needed for fixing capacity, and how they change when establishment. The part on Assembling of Seals and ‘O’Rings incorporates roughly 25 functional beginning stage definitions dependent on various rubbers, with fix and property information of those plans as rules for technologists and designers. Accentuation on significant regions, for example, utilizations of elastic as liquid seals in the atomic, avionics, oil boring and auto industriesIncludes a section on Elastic Development Joints as the capacity of such extension joints as line connectors is by implication connected with spillage and counteraction of liquid course through the pipesThe part on Production of Seals and ‘O’Rings incorporates approx. 25 serviceable beginning stage details dependent on various rubbers, with fix and property information of those definitions as rules for technologists and architects.

10. “Automotive Sensory Systems” by C Nwagboso

“Automotive Sensory Systems” Book Review: The quickly developing requirement for versatility has carried with it a significant test for development in the activity and usage of auto frameworks. The practical, ecological and wellbeing imperatives forced by the increment in the quantity of street vehicles and resulting government arrangements likewise require generous item improvement through the utilization of information innovation. This includes the upgrade of vehicle informatics and telematic frameworks with extra sensors and frameworks. The development in the plan and improvement of auto tangible frameworks is quick to the point that there is a pressing requirement for the specialists associated with the innovation to cooperate to give a reference book to the designer of today and tomorrow. This book is planned for engineers, supervisors, researchers, academicians and strategy creators, understudies ought to likewise think that it’s important. To meet the necessities of understudies the rudiments are clarified in basic terms; nonetheless, it is trusted that others will value this methodology, since the majority of us are very much aware that holes stay in our insight into the components of our calling.

11. “Hydraulic Machines: Turbines and Pumps” by Krivchenko G I

“Hydraulic Machines: Turbines and Pumps” Book Review: This book covers operating principles, design, performance characteristics of hydraulic machines. It provides insights on use of hydraulic machines in electric power plants, construction works, hydraulic engineering, municipal facilities, industry, agriculture, and many other disciplines. It uses numerical examples to promote better understanding of concepts, methods, and relationships and empowers readers to apply them in real-world problem solving. Numerous diagrams and graphical representation help the reader to understand the subject easily. It is primarily designed for students and teachers of mechanical and chemical engineering.


8. Numerical Techniques in Hydraulic Engineering

1. “Computational Fluid Dynamics for Engineers” by K A Hoffmann and S T Chiange
2. “Computational Fluid Dynamics for Engineers” by Bengt Andersson

Book Review: This book has become a valuable tool for many engineers. The book introduces CFD simulations of turbulence, mixing, reaction, combustion and multiphase flows. The book stresses on the understanding of physics of these flows thereby helping the engineers to select appropriate models to gain reliable simulations. The book also explains and discusses the basics and limitations of models. The book also gives hands on experience of drawing, meshing and simulation. The book also deals with the design of industrial scale selective reduction processes and explores various design improvements.

3. “Numerical Methods for Engineers” by S C Chapra and R P Canale

Book Review: This book demonstrates the instructional techniques and covers motivation, mathematical background, orientation and epilogue along with tradeoffs, important formulas and relationships. The book also discusses the most advanced methods in the field of numerical analysis. The book contains numerous examples and case studies covering all areas of engineering thereby exposing the students to various fields in engineering. The book also covers areas of biotechnology and biomedical engineering.

4. “Numerical Modeling in Open Channel Hydraulics” by Romuald Szymkiewicz

“Numerical Modeling in Open Channel Hydraulics” Book Review: The book is an updated and revised piece of work featuring latest theory and recent developments in hydraulic engineering. The book covers both theoretical as well as practical concepts like hydrodynamics and channel hydraulics. The chapters describe various aspects of fluid dynamics in detail. The book delicately focuses students, researchers, professionals, and engineers in the development of hydraulic engineering. Many important algorithms are highlighted in this text. This book will be useful for marine and hydraulic engineers.

5. “Open Channel Flow: Numerical Methods and Computer Applications” by Jeppson Roland

“Open Channel Flow: Numerical Methods and Computer Applications” Book Review: The book will be suitable for both graduate students as well as the professional engineers related to the field of channel systems. It begins with an overview of basic principles and key concepts of channel systems. The topics like fluid mechanics, conservation of mass, energy, and momentum are discussed. Moving further the advanced topics and complex problems of channel systems are discussed. Many real-world problems can be solved with the help of given concepts and methodologies. For better understanding of the readers, the book contains several examples. The book will act as a guide for analyzing and designing economical channel systems.

6. “An Introduction to Recent Developments in Theory and Numerics for Conservation Laws” by UNIVERSITY OF MARIO OHLBERGER,DIETMAR KRNER UNIVERSITY OF FREIBURG GERMANY

“An Introduction to Recent Developments in Theory and Numerics for Conservation Laws” Book Review: The book aims in presenting latest information on practical approach on problem sets in realistic situations. This book covers various topics and theories like scientific computing and mathematical modelling, optimization methods, discretization techniques and multi scale approaches. The book contains all lectures and notes in high quality. This book is an excellent resource for students and professionals in computational science and engineering of hydrodynamics.

7. “Numerical and Phyical Aspects of Aerodynamic Flow III” by Cebeci

“Numerical and Physical Aspects of Aerodynamic Flow III” Book Review: This book focuses on presenting latest information on fundamental concepts of Aerodynamic flows. The chapters of the book are nicely interpreted and cover various topics like recent developments in stability and transition of aerodynamics laws. The topics like subsonic and transonic aerodynamic flows are discussed in detail. The book provides easy-to-grab knowledge to the readers. This book will be an asset for the students and professionals in engineering of aerodynamics.

8. “Numerical Simulation of Compressible Navier-Stokes Flows” by Marie Odile Bristeau

“Numerical Simulation of Compressible Navier-Stokes Flows” Book Review: The book is an updated and revised piece of work featuring latest theory and recent developments in aircraft and engine design. The book is based on numerical simulation of navier stokes flows. It covers various applications along with examples. The applications highlighted in the book include simulation of very complex turbulent and combustion phenomena. The book will be suitable for the students of mechanical and aerospace engineering.

9. “Numerical Methods for Shallow-Water Flow” by Boudewijn Vreugdenhil

“Numerical Methods for Shallow-Water Flow” Book Review: The book presents the latest information on fundamental concepts of water flow. It offers various concepts in advance learning. The book is reader-friendly and covers both theoretical and practical concepts. It also features various projects along with their definitions. The chapters of this book cover various topics related to flow of shallow water namely, atmospheric flows, lakes flows, and river flows. The major part of the book is about two-dimensional shallow-water equations and covers those ideas with better solutions. This book is an excellent resource for students and professionals in hydraulic engineering.

10. “Environmental Hydraulics:Numerical Methods” by Jean-michel

“Environmental Hydraulics: Numerical Methods” Book Review: The book stresses on the understanding of physical processes used in many scientific disciplines like meteorology and coastal morphodynamics. The book is written from both theoretical as well as practical point-of-view and aims in presenting latest information on fundamental concepts of hydraulics. The book also offers various concepts in advance learning along with mathematical models and conceptual models. The book addresses many mathematical and numerical tools used in various scientific fields. For presenting practical applications of hydraulics, the book features a bunch of case-studies. The book will be suitable for the students and professionals of hydraulic engineering.


9. Hydraulics of Sediment Transport

1. “An Introduction to Hydraulics of Fine SEDiment Transport (Advanced Series On Ocean Engineering)” by Mehta

“An Introduction to Hydraulics of Fine SEDiment Transport (Advanced Series On Ocean Engineering)” Book Review: This book is for graduates and under-graduate students of civil and coastal engineering. It explains transport processes and its complexities. Although it is an introduction to the subject; The book contains development of transport in scientific and engineering applications. This book represents the components of fine-grained — especially cohesive — sediment transport.The book contains various solved examples and exercises.

2. “Fluvial Hydraulics: Flow and Transport Processes in Channels of Simple Geometry” by Walter H Graf

“Fluvial Hydraulics: Flow and Transport Processes in Channels of Simple Geometry” Book Review: This book is useful as a textbook for undergraduate or graduate students.Also, it helps the professionals dealing with problems of environment, water resources, civil and agricultural engineering. The book consists of hydrodynamic concepts and calculation procedures. It explains steady/unsteady uniform and non-uniform flow in open channels. Also,it discusses transport phenomena, turbidity currents and mixing processes in open channels. The book contains various solved exercises with proper explanation of the solution. The book contains unsolved examples too for students to practice.

3. “Fluvial Hydrodynamics: Hydrodynamic and Sediment Transport Phenomena (GeoPlanet: Earth and Planetary Sciences)” by Subhasish Dey

“Fluvial Hydrodynamics: Hydrodynamic and Sediment Transport Phenomena (GeoPlanet: Earth and Planetary Sciences)” Book Review: The book works as a textbook for graduates and as a guide for field engineers. To understand this book students must have basic knowledge in hydraulics. The book consists of fundamentals of hydrodynamics and particle motion. The book explains turbulence characteristics related to sediment motion. It includes a statistical description for the role of turbulence. It also analyses the local scour problems at hydraulic structures and scale models.

4. “Hydrodynamics and Water Quality: Modeling Rivers, Lakes, and Estuaries” by Zhen–Gang Ji

“Hydrodynamics and Water Quality: Modeling Rivers, Lakes, and Estuaries” Book Review: This book is a reference for practicing engineers, scientists, and water resource managers. The book summarizes principles, basic processes, mathematical descriptions and practical applications related to surface waters.It explains hydrodynamics, sediment transport, toxics fate and transport and water quality in surface waters. The content within the book is used to solve practical problems in rivers, lakes, estuaries, etc. This book is also used in mathematical models which are applied to simulate processes in surface waters. Also, it points out the environmental risks and shallow water processes in wetlands. The book discusses technical approaches to understand mathematical models.

5. “Studies of Cave Sediments: Physical and Chemical Records of Paleoclimate” by I D Sasowsky and John Mylroie

“Studies of Cave Sediments: Physical and Chemical Records of Paleoclimate” Book Review: This book is best for geoscience researchers, graduates and undergraduates. This book is also useful for students interested in climate change, paleohydrology, karst geology, and sedimentology. This book consists of data on cave sediments. It directs students in appropriate applications of techniques, and their limitations. It also explains synthesized methods that can be used to decipher complex deposits.The book contains data on chemical deposits (speleothems) as well as clastic sediments.

6. “Urban Water Distribution Networks: Assessing Systems Vulnerabilities, Failures, and Risks” by Michalis Fragiadakis and Agathoklis Agathokleous

“Urban Water Distribution Networks: Assessing Systems Vulnerabilities, Failures, and Risks” Book Review: This book provides an approach on water distribution networks (WDN) based on component analysis, network topology and the effects of a network’s past performance. The book helps the water distribution networks engineers and system designers. The book evaluates methods for water distribution pipes. It also talks about the topological aspects and their effects on network vulnerability. The book explains numerical modeling methods for finding and analyzing systems vulnerabilities in water distribution networks. It provides case studies of networks under continuous water supply operations.

7. “Sediment Transport: A Geophysical Phenomenon (Fluid Mechanics and Its Applications)” by Albert Gyr and Klaus Hoyer

“Sediment Transport: A Geophysical Phenomenon (Fluid Mechanics and Its Applications)” Book Review: This book is helpful for graduates, undergraduates and researchers of sediment transport. Also,it works as a manual for engineers. The book explains the fundamental principles of sediment. It provides different ways of modeling the sediment transport. This book discusses phenomena such as bed load and suspension transport. It introduces concepts from turbulent flow regime.

8. “Cohesive Sediments in Open Channels: Erosion, Transport and Deposition” by Emmanuel Partheniades

“Cohesive Sediments in Open Channels: Erosion, Transport and Deposition” Book Review: This book explains how cohesive sediments are transported, deposited and eroded. It provides information on how to apply hydraulic design and understand the behavior of cohesive sediments in a flow field. The book contains properties, nature and origin of interparticle physicochemical forces. It also discusses forces between clay particles. It explains the processes and dynamics of flocculation and the hydrodynamic behavior of cohesive sediments. The book describes deposition and resuspension of beds deposited from suspension from flowing waters. It contains applications of the hydraulics of cohesive sediments.

9. “River System Analysis and Management” by Nayan Sharma

“River System Analysis and Management” Book Review: This book is helpful for scientists, water managers, environmentalists, researchers and students in water management and river system analysis. This book contains information on various interrelated processes, analysis and activities on river management. It explains various details essential to achieve a sustainable development of river basins. It helps to achieve water demand and river management. The book presents knowledge on behaviour of rivers and analyses the issues related to rivers to develop river system management techniques. It provides river restoration and training measures to remove intensified erosion, land water degradation and stream flow pollution.

10. “Rivers – Physical, Fluvial and Environmental Processes (GeoPlanet: Earth and Planetary Sciences)” by Paweł Rowiński and Artur Radecki-Pawlik

“Rivers – Physical, Fluvial and Environmental Processes (GeoPlanet: Earth and Planetary Sciences)” Book Review: This book is useful for engineers, geophysicists, students and researchers in water-related fields. This book analyses physical, chemical and biological attributes of flowing water. It shares knowledge on the rivers on the basis of their physical, fluvial and environmental processes. The book is written on the basis of information by experts from leading research laborataries.


10. Case Studies On Computational Hydraulics and Sediment Transport

1. “Computational Fluid Dynamics: An Introduction” by John Wendt

“Computational Fluid Dynamics: An Introduction” Book Review: This book is based on a lecture series of the samne name. This is an introductory book on the subject. This book includes numerical techniques with their practical applications. This book describes methods of discretizing the equations. Various transformation techniques and grids and grids are also explained. There are two examples of numerical methods given in this book. These are source and vortex panel methods and the explicit method. The 3rd part has chapters on advanced material.

2. “Intelligent Transportation Systems – Problems and Perspectives (Studies in Systems, Decision and Control)” by Wiesław Pamuła and Aleksander Sładkowski

“Intelligent Transportation Systems – Problems and Perspectives (Studies in Systems, Decision and Control)” Book Review: Application problems of Intelligent Transport Systems (ITS) are discussed in this book. Designing and proofing are given special importance. Design problems of urban ITS are explained in the first part. Case studies for different modes of transport are given in the 2nd part. This includes flight transport, rail transport and aerospace transport. Space stations have also been included. Various ideas for deployment are provided. These can be further developed by scientists. This book can be used for training purposes. It can help specialists, students and post-graduate students.

3. “Experimental and Computational Fluid Mechanics (Environmental Science and Engineering)” by Jaime Klapp and Abraham Medina Ovando

“Experimental and Computational Fluid Mechanics (Environmental Science and Engineering)” Book Review: This book is based on a lecture conference. It was the Enzo Levi and XVIII Annual Meeting of the Fluid Dynamic Division. This book is for fourth-year undergraduate and graduate students. This can also be used by scientists of physics, engineering and chemistry. This is an introductory book on the subject. Various applications are given. These include oceanography, multiphase flows and convection. Diffusion, heat transfer, rheology and granular materials are also included. It also has viscous flows, porous media flows and astrophysics. This book can be used for both teaching and research.

4. “Dam Break Analysis Using Hec-Ras- A Case Study” by Dilip Kumar

“Dam Break Analysis Using Hec-Ras- A Case Study” Book Review: The book aims for development of mathematical models. This is for simulating dam break hydraulics. This uses the HEC-RAS software. This model is also used to predict and analyze the flood. This is when flood is about to happen due to breaking of a dam.

5. “Bioengineering Case Studies” by Wendi Goldsmith and Donald Gray

“Bioengineering Case Studies” Book Review: This book describes 30 bio-stabilization projects from the United States. Bio-stabilization means using plant materials to reinforce soils and protect upland slopes. It can also be used for surficial erosion and shallow slope failures. Various examples and challenges are included. Various photographs are included. This book can be used by civil and environmental engineers. It can also be used by environmental scientists.

6. “Integrating Hydraulic and Hydrological Modelling for Flood Mitigation: A Case Study in Taga Village, Chhattisgarh, India” by Triambak Baghel and Mukesh Kumar Verma
7. “Successful Case-based Reasoning Applications-2 (Studies in Computational Intelligence)” by Stefania Montani and Lakhmi C Jain

“Successful Case-based Reasoning Applications-2 (Studies in Computational Intelligence)” Book Review: This is a brief research guide. Case-based reasoning (CBR) applications are the main focus of this book. Its flexibility and applications are given in the first volume. Heterogeneity of CBR domains are explored in the second part. This book is for application engineers, scientists, professors and students.

People who are searching for Free downloads of books and free pdf copies of these books on Hydraulics – we would like to mention that we don’t have free downloadable pdf copies of these good books and one should look for free pdf copies from these Authors only if they have explicitly made it free to download and read them.

We have created a collection of best reference books on “Hydraulics” so that one can readily see the list of top books on “Hydraulics” and buy the books either online or offline.

If any more book needs to be added to the list of best books on Hydraulics subject, please let us know.

advertisement
advertisement
Subscribe to our Newsletters (Subject-wise). Participate in the Sanfoundry Certification contest to get free Certificate of Merit. Join our social networks below and stay updated with latest contests, videos, internships and jobs!

Youtube | Telegram | LinkedIn | Instagram | Facebook | Twitter | Pinterest
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & technical discussions at Telegram SanfoundryClasses.