Best Reference Books – Drives and Controls for Automation

«
»
We have compiled the list of Top 10 Best Reference Books on Drives and Controls For Automation subject. These books are used by students of top universities, institutes and colleges. Here is the full list of top 10 best books on Drives and Controls For Automation along with reviews.

Kindly note that we have put a lot of effort into researching the best books on Drives and Controls For Automation subject and came out with a recommended list of top 10 best books. The table below contains the Name of these best books, their authors, publishers and an unbiased review of books on "Drives and Controls For Automation" as well as links to the Amazon website to directly purchase these books. As an Amazon Associate, we earn from qualifying purchases, but this does not impact our reviews, comparisons, and listing of these top books; the table serves as a ready reckoner list of these best books.

1. “Advanced Control of Electrical Drives and Power Electronic Converters (Studies in Systems, Decision and Control)” by Jacek Kabziński

“Advanced Control of Electrical Drives and Power Electronic Converters (Studies in Systems, Decision and Control)” Book Preview: This textbook is compiled by professionals in electrical engineering, linking control theory, power electronics, artificial neural networks, embedded controllers and signal processing fields. The chapters are written by different professionals and the reports presented are based on their personal research, laboratory experiments and productive implementation. It focuses on three major topics which are motion control in complex electromechanical systems, including sensorless control, fault diagnosis and fault tolerant control of electric drives and new control algorithms for power electronics converters. Practical and theoretical problems are included in the book.

2. “Digital Control of Electrical Drives (Power Electronics and Power Systems)” by Slobodan N Vukosavic

advertisement
“Digital Control of Electrical Drives (Power Electronics and Power Systems)” Book Review: This book contains a comprehensive understanding of problems of coding control algorithms on a DSP platform. It has a set of Simulink simulation files (source codes) that allows readers to predict the outcomes of control solutions on the overall motion control system. It connects control analysis and industrial practice. It expounds on concepts related to electric drives and their usage in a motion control environment. There are also application-specific problems. Readers get to learn the fundamental concepts of motion control systems, analyze and design discrete-time speed and position controllers, set adjustable feedback parameters and evaluate closed-loop performances.

3. “Advanced and Intelligent Control in Power Electronics and Drives (Studies in Computational Intelligence)” by José Rodríguez and Frede Blaabjerg

“Advanced and Intelligent Control in Power Electronics and Drives (Studies in Computational Intelligence)” Book Review: This book contains the combined work of different professionals in the electrical engineering field. It expounds on power electronics and variable frequency drives. It includes the uptodate development in other fields like control theory, computational intelligence and signal processing as they all affect modern solutions in control of power electronics and drives. It is compiled by a professional in the modern advanced control methods sector which penetrates current implementation of power converters and drives. It is divided into three parts; Advanced Power Electronic Control in Renewable Energy Sources, Predictive Control of Power Converters and Drives and Neurocontrol and Nonlinear Control of Power Converters and Drives.

4. “Vector Control of Three-Phase AC Machines (Power Systems)” by Nguyen Phung Quang

advertisement
advertisement
“Vector Control of Three-Phase AC Machines (Power Systems)” Book Review: This book expounds on the vector control of three-phase AC machines, in particular induction motors with squirrel-cage rotors (IM), permanent magnet synchronous motors (PMSM) and doubly-fed induction machines (DFIM), from a practical design and development perspective. It centres on the application of IM and PMSM in electrical drive systems, where field-orientated control has been established in practice. It explains the use of grid-voltage oriented control of DFIMs in wind power plants. Students, researchers, practitioners, development engineers and designers in the field of electrical drives and wind-power technology would definitely find it beneficial.

5. “Microcomputer-Based Adaptive Control Applied to Thyristor-Driven DC-Motors (Advances in Industrial Control)” by Ulrich Keuchel and Richard M Stephan

“Microcomputer-Based Adaptive Control Applied to Thyristor-Driven DC-Motors (Advances in Industrial Control)” Book Review: This book describes technology transfer in control engineering. It provides updated information on the development of control technology. It also includes industrial reports, feasibility study papers and the reports of advanced collaborative projects. It showcases the works of researchers in industrial control. It indicates that technology transfer can be achieved and that progressive adaptive controllers provide performance benefits over conventional industrial (three term) controllers.

6. “Drives and Control for Industrial Automation (Advances in Industrial Control)” by Kok Kiong Tan and Andi Sudjana Putra

advertisement
“Drives and Control for Industrial Automation (Advances in Industrial Control)” Book Review: This book introduces the fundamental material for comprehending servo control in automation. It starts with a macroscopic view of the subject matter, treating drives and control as parts of a single system. The key components of servo control: sensors, controllers and actuators are well explained in the book. It is written in a beginner-friendly manner. Every chapter includes material that can be studied independently. Some chapters explain drivers based on the way they are regularly classified in the industry, each comprising its actuators and sensors.

7. “Hard Disk Drive: Mechatronics and Control (Automation and Control Engineering)” by Abdullah Al Mamun and GuoXiao Guo

“Hard Disk Drive: Mechatronics and Control (Automation and Control Engineering)” Book Review: This textbook surveys the obstacles introduced by modern hard disk drives. Readers can grasp the ways to get over the challenges with Hard Disk Drive: Mechatronics and Control. It starts with a summary of hard disk drive history, components, operating principles and industry trends. The head positioning servomechanism is well explained and the design of the actuator servo controller, the critical aspects of spindle motor control and the servo track writer are also explained in detail. It includes comparison between different design approaches for both single- and dual-stage servomechanisms and their pros and cons.Different examples and figures are used to elaborate on the subject matter.

8. “Advances in Systems, Control and Automation: ETAEERE-2016 (Lecture Notes in Electrical Engineering)” by Avinash Konkani and Rabindranath Bera

advertisement
“Advances in Systems, Control and Automation: ETAEERE-2016 (Lecture Notes in Electrical Engineering)” Book Review: This book contains the select proceedings of the ETAEERE 2016 conference. It expounds on different systems or machines and their complex operation, behaviors and linear–nonlinear relationship in different environments. Problems of multivariable control systems are included. It gives the reader the fundamental concepts required for doing research in the field of control and automation. The classical and modern design of different intelligent automated systems are well explained.

9. “Control of Electrical Drives (Power Systems)” by Werner Leonhard

“Control of Electrical Drives (Power Systems)” Book Review: This book shows the importance of electrical drives in converting electromechanical energy in transportation, material handling and most production processes. It also describes the ease of controlling electrical drives and the need for energy conservation. It expounds on stringent operating conditions and widely varying specifications. The differences between chemical or thermal processes are added.It includes the progress made in the controlled electrical drives field.

10. “Fundamentals of Electrical Drives (Power Systems)” by Andre Veltman and Duco W J Pulle

advertisement
“Fundamentals of Electrical Drives (Power Systems)” Book Review: This book teaches the reader a lot about electrical drives. It is written in an intermediate friendly manner. It shows how electrical drives are important for power generation, household appliances, automotive and industrial applications and how adjustable speed drives are used in robotics, wind turbines and hybrid vehicles. power semiconductors, digital signal processors and simulation software. It is designed for students and engineers who are interested in modern electrical drives.

People who are searching for Free downloads of books and free pdf copies of these top 10 books on Drives and Controls For Automation – we would like to mention that we don’t have free downloadable pdf copies of these good books and one should look for free pdf copies from these Authors only if they have explicitly made it free to download and read them.

We have created a collection of best reference books on "Drives and Controls For Automation" so that one can readily see the list of top books on "Drives and Controls For Automation" and buy the books either online or offline.

If any more book needs to be added to the list of best books on Drives and Controls For Automation subject, please let us know.

Sanfoundry Global Education & Learning Series – Best Reference Books!

Participate in the Sanfoundry Certification contest to get free Certificate of Merit. Join our social networks below and stay updated with latest contests, videos, internships and jobs!
advertisement
advertisement
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He is Linux Kernel Developer & SAN Architect and is passionate about competency developments in these areas. He lives in Bangalore and delivers focused training sessions to IT professionals in Linux Kernel, Linux Debugging, Linux Device Drivers, Linux Networking, Linux Storage, Advanced C Programming, SAN Storage Technologies, SCSI Internals & Storage Protocols such as iSCSI & Fiber Channel. Stay connected with him @ LinkedIn | Youtube | Instagram | Facebook | Twitter