Here is the full list of best reference books on Automotive Embedded System.
We have put a lot of effort into researching the best books for reference on this subject and came out with a recommended list of best books. The table below contains a review of these books and links to the Amazon website to directly purchase these books. As an Amazon Associate, we earn from qualifying purchases, but this does not impact our reviews, comparisons, and listing of these books; the table serves as a ready reckoner list of these best books.
|1. “Automotive Embedded Systems Handbook (Industrial Information Technology)” by Nicolas Navet and Francoise Simonot-Lion
“Automotive Embedded Systems Handbook (Industrial Information Technology)” Book Review: This book provides a thorough knowledge of existing and future automotive electronic systems. It includes methodological and technical solutions in the areas of in-vehicle architectures, multipartner development processes, etc. The book begins with an introduction to the design constraints of automotive-embedded systems. The next section focuses on networks and protocols, including CAN, LIN, FlexRay, and TTCAN. The third part explores the design processes of electronic embedded systems, along with new design methodologies, such as the virtual platform. The final section presents validation and verification techniques relating to safety issues. The book is written for students in electrical and industrial engineering. MCQs and short answer questions at the end of each chapter help the students to test their understanding of the topic.
|2. “Analysis of Microcontrollers” by D P Kothari Shriram
“Analysis of Microcontrollers” Book Review: This book teaches the usage and programming of microcontrollers. It is useful for the students who are interested in learning about the embedded systems. The topics range from the basic microcontroller to the most frequently used microcontroller 8051. After that PIC microcontroller is discussed in detail. The book contains all the important topics related to microcontroller 8051 like architecture, instruction sets, and programming models. Towards the end, the ARM model of architecture is described in a concise manner. Practical examples included in each topic help the students to understand the concepts clearly. Few projects and assignments have also been discussed in the end as per the requirement of the topic.
|3. “Fault Detection in Automotive Network Embedded Electronics Systems” by Alexandre Vicente
“Fault Detection in Automotive Network Embedded Electronics Systems” : This research book includes the data from the Controller Area Network from two vehicles. Then it goes on to evaluate different techniques for data mining and feature extraction. The book also describes possible methods for fault detection that could be used in complex systems. The focus is on advanced technology as vehicles are becoming more computerized. The data used in this research was collected from an ordinary vehicle which helps the reader to understand without any issues of technicality. The book provides a practice-oriented reading experience as the techniques involved in the research are based on proven mathematical methods. These methods have an original application in areas of statistics and digital signal processing. At the end of the book, techniques to devise a model of the Controller Area Network bus are discussed along with the usage of the network bus for finding faults in the network.
|4. “Model-Based Engineering of Embedded Systems: The SPES 2020 Methodology” by Klaus Pohl and Harald Hönninger
“Model-Based Engineering of Embedded Systems: The SPES 2020 Methodology” Book Review: This book provides a detailed explanation of the Software Platform Embedded Systems (SPES) modeling framework and describes its applicability in embedded system development in various industry domains. These domains are automation, automotive, avionics, energy, and healthcare. The first part discusses the status quo of embedded systems development and model-based engineering. The second part describes the SPES modeling framework. The third part discusses the steps taken to ensure that the framework met the requirements discussed in the first part. At last, the book summarizes the results achieved and also provides an outlook on future work. The book is beneficial for professionals and practitioners who work with the development of embedded systems on a daily basis. Researchers in academia and industry can also use it as per the requirements.
|5. “International Workshop: ModEasy 2007: Model Driven Design for Automotive Safety Embedded Systems (MODEASY) (Keine)” by Jean Luc Dekeyser and Klaus D McDonald-Maier|
|6. “Software Engineering for Embedded Systems: Chapter 22. Embedded Software for Automotive Applications” by Inga Harris
“Software Engineering for Embedded Systems: Chapter 22. Embedded Software for Automotive Applications” Book Review: The chapter given in the book describes a special kind of automotive system- the embedded software. It describes the planning, architecting, development, testing, validation and verification of the automotive system. The book explains how the physical task of writing embedded software for automotive applications is different from other application areas. It will be useful for software engineers who work with embedded systems in their daily lives. Besides, it will also help students and researchers who are looking to increase their knowledge of the subject. The book helps the readers to understand how and why the systems have evolved into the complex environment. The readers are made familiar with the applicable quality standards and why such strict quality controls exist. All these application based methods given in the book provides the readers with a practical approach, along with theoretical understanding. The pictures given throughout the book help in better understanding of the subject.
|7. “Embedded Systems Handbook, Second Edition 2-Volume Set (Industrial Information Technology)” by Richard Zurawski
“Embedded Systems Handbook, Second Edition 2-Volume Set (Industrial Information Technology)” Book Review: This book covers various aspects of embedded systems such as their design, verification, networking, and applications. The book is divided in two volumes. Volume one starts with an introduction to embedded systems design and verification. After that, embedded processors and various aspects of system-on-chip and FPGA, as well as solutions to design challenges are discussed. The last section of volume 1 talks about power-aware embedded computing, design issues specific to secure embedded systems, and web services for embedded devices. Volume II focuses on selected application areas of networked embedded systems. It will also benefit embedded-systems engineers who will gain an understanding of new application areas and new ways of addressing old problems more efficiently by the end of the book. Every topic is explained with the help of pictures to make it easily understandable for the readers.
|8. “Embedded Systems Handbook (Industrial Information Technology)” by Richard Zurawski
“Embedded Systems Handbook (Industrial Information Technology)” Book Review: This book offers a blend of basic and advanced topics of embedded systems. The topics discussed are- broad introduction to embedded systems, system- and network-on-chip (SoC/NoC) design, testing of embedded core-based integrated circuits, etc. Topics like technology developments, deployments, and trends are also talked about in the book. It is useful for people who are new to engineering as well as for trained engineers. The book explains in detail topics like networked embedded systems and sensor networks. This comprehensive handbook presents timely tutorials, surveys, and technological overviews that helps the readers to gain a researched analysis of the topics included in the book.
|9. “Solutions on Embedded Systems” by Massimo Conti and Simone Orcioni
“Solutions on Embedded Systems” Book Review: Embedded systems have an increasing importance in today’s world. This book describes how the growing complexity of embedded systems and the emerging trend to interconnections between them lead to new challenges. It provides intelligent solutions necessary to overcome these challenges and to provide reliable and secure systems to the customer. The book also talks about several innovative approaches that provide intelligent solutions in embedded systems. It provides detailed information on the implementation of these solutions. The results obtained after the implementation are thoroughly included that helps the readers to have a practical approach towards the subject matter. The book will benefit those engineers working in the field of embedded systems, students and researchers who wish to expand their knowledge of the subject.
|10. “Embedded System Applications” by Jean-Claude Baron and J C Geffroy
“Embedded System Applications” Book Review: This book describes the latest techniques for embedded system design in a variety of applications. It also includes some of the latest software tools for embedded system design. Applications of embedded system design in avionics, satellites, radio astronomy, space and control systems are illustrated in separate chapters. Finally, the book contains chapters related to industrial best-practice in embedded system design. The book is important for researchers and designers working with the design of embedded systems for industrial applications. The readers will get to know how the advances in microelectronics have made possible applications that would have been impossible without an embedded system design. The topic is explained with the help of examples and pictures that make the readers more interested in learning.
People who are searching for Free downloads of books and free pdf copies of these books – “Automotive Embedded Systems Handbook (Industrial Information Technology)” by Nicolas Navet and Francoise Simonot-Lion, “Analysis of Microcontrollers” by D P Kothari Shriram, “Fault Detection in Automotive Network Embedded Electronics Systems” by Alexandre Vicente, “Model-Based Engineering of Embedded Systems: The SPES 2020 Methodology” by Klaus Pohl and Harald Hönninger, “International Workshop: ModEasy 2007: Model Driven Design for Automotive Safety Embedded Systems (MODEASY) (Keine)” by Jean Luc Dekeyser and Klaus D McDonald-Maier,”Software Engineering for Embedded Systems: Chapter 22. Embedded Software for Automotive Applications” by Inga Harris, “Embedded Systems Handbook, Second Edition 2-Volume Set (Industrial Information Technology)” by Richard Zurawski, “Embedded Systems Handbook (Industrial Information Technology)” by Richard Zurawski, “Solutions on Embedded Systems” by Massimo Conti and Simone Orcioni, “Embedded System Applications” by Jean-Claude Baron and J C Geffroy – we would like to mention that we don’t have free downloadable pdf copies of these good books and one should look for free pdf copies from these Authors only if they have explicitly made it free to download and read them.
We have created a collection of best reference books on “Automotive Embedded System” so that one can readily see the list of top books on “Automotive Embedded System” and buy the books either online or offline.
If any more book needs to be added to the list of best books on Automotive Embedded System Subject, please let us know.
Sanfoundry Global Education & Learning Series – Best Reference Books!Participate in the Sanfoundry Certification contest to get free Certificate of Merit. Join our social networks below and stay updated with latest contests, videos, internships and jobs!