Automation in Manufacture Books

«
»

We have compiled the list of Best Reference Books on Automation In Manufacture subject. These books are used by students of top universities, institutes and colleges. Here is the full list of best books on Automation In Manufacture along with reviews.

Kindly note that we have put a lot of effort into researching the best books on Automation In Manufacture subject and came out with a recommended list of best books. The table below contains the Name of these best books, their authors, publishers and an unbiased review of books on “Automation In Manufacture” as well as links to the Amazon website to directly purchase these books. As an Amazon Associate, we earn from qualifying purchases, but this does not impact our reviews, comparisons, and listing of these top books; the table serves as a ready reckoner list of these best books.

List of Automation in Manufacture Books with author’s names, publishers, and an unbiased review as well as links to the Amazon website to directly purchase these books.

1. Automation in Manufacture

1. “Automation, Production Systems and Computer Integrated Manufacturing” by Mikell P Groover

“Automation, Production Systems and Computer Integrated Manufacturing” Book Review: The book deals with production systems and modern manufacturing techniques. It may be of use to students across a variety of engineering domains related to the subject. Concepts of automation in manufacturing are given special attention. Computer – integrated manufacturing is also covered.

2. “CAD / CAM” by Mikell P Groover and Emory W Zimmers

advertisement
advertisement
“CAD / CAM” Book Review: The book acts as a guide for students of senior and graduate-level and professionals studying CAD/CAM. The reader can find concepts and applications of interactive computer graphics in the design of industrial robots and automated inspections and flexible manufacturing systems. The contents of the book are spread over 8 chapters. Initially the book gives an introduction of computers, basics of CAD/CAM to the readers before diving into more complex topics. The middle sections of the book contain concepts of Numerical Control, the Beginnings of Cam, Industrial Robots. The last few chapters mainly talk about Computer – Integrated Production Management Systems, Computer Control and Cad/Cam Implementation. The reader can find various concepts in and around CAD/CAM described well in detail with the help of illustrations throughout the text.

3. “Numerical Control and Computer Aided Manufacture” by Pressman and Williams
4. “An Introduction to Automated Process Planning System” by Tiess Chieu Chang and Richard A Wysk
5. “Automation in the Design and Manufacture of Large Marine Systems” by Chryssostomos Chryssostomides

“Automation in the Design and Manufacture of Large Marine Systems” Book Review: The book focuses on concepts of automation. It can be accessed by students as well as researchers alike. Emphasis is laid on design and fabrication of composite materials. Sculptured shape representation and interrogation in a computer environment are discussed. Apart from this, automated analysis, tolerances, forming of metal shells and adaptive control are also included.

6. “Virtual and Augmented Reality Applications in Manufacturing” by S K Ong and A Y C Nee

“Virtual and Augmented Reality Applications in Manufacturing” Book Review: The book deals with the concepts of Virtual and Augmented reality from a manufacturing standpoint. It may be of interest to advanced students and researchers. The book focuses more on the manufacturing aspects of virtual and augmented reality rather than computer science. A wide variety of applications of these technologies in industries are also presented.

7. “Robots and Automated Manufacture: Meeting on UK Research in Robotics and Automated Manufacture” by John Billingsley

“Robots and Automated Manufacture: Meeting on UK Research in Robotics and Automated Manufacture” Book Review: The book provides an overview of robots and automation in the field of manufacturing. It can be referred to by industrial workers and robotics researchers. Vision and several other sensory systems employed by robots are covered. The required equipment is discussed while also talking about the financial aspects involved. Computer simulations and programming are treated such as collision avoidance.

8. “Control and Dynamic Systems: Manufacturing and Automation Systems v.46: Advances in Theory and Applications” by Cornelius T Leondes

“Control and Dynamic Systems: Manufacturing and Automation Systems v.46: Advances in Theory and Applications” Book Review: The book is a collaboration of various research papers presented on manufacturing and automated systems. It can be of use to students, engineers and researchers. The book focuses mainly on the recent technological changes and advances in the field of modern control theory.

advertisement
9. “Automation Encyclopedia: A to Z in Advanced Manufacturing” by G Graham

“Automation Encyclopedia: A to Z in Advanced Manufacturing” Book Review: The book presents all the terminology one may come across in the field of automation. Students and researchers can find this book to be of use. An in-depth definition is provided for a majority of automation and manufacturing terms. Over 700 definitions can be found in the book. A summary of all the applications and the current state of automation is also covered.

10. “Production Planning in Automated Manufacturing” by Yves Crama and Alwin G Oerlemans

“Production Planning in Automated Manufacturing” Book Review: Written in a simple and user-friendly way, this text documents the approaches for production planning problems in automated manufacturing. Topics covered in this text include automated manufacturing, throughput rate optimization in the automated assembly of printed circuit boards, approximation algorithms for 3-dimensional assignment problems with triangle inequalities, scheduling jobs of equal length: complexity, facets and computational results, tool loading problem: an overview, column generation approach to job grouping, job grouping problem for flexible manufacturing systems: some extensions, local search approach to job grouping, and minimizing the number of tool switches on a flexible machine. References are provided at the end of each chapter.


advertisement

2. Automation in Manufacturing Systems

1. “Computer Automation in Manufacturing: An introduction” by Thomas O Boucher

“Computer Automation in Manufacturing: An Introduction” Book Review: This book is designed for undergraduate students with a background of physics and calculus. This book provides instructions about computer architecture, interfacing of mechanical systems and software development. The book starts with the basic topics such as development in manufacturing technology for automation and hierarchical model of automation. The book covers the architecture of microprocessor based systems, sensors and automatic data acquisition, actuators and the performance of work, control theory, programmable logic controllers and supervisory control of manufacturing systems. The book contains a summary at the end of every chapter which helps to review the chapter. The book provides exercises at the end of each chapter which enables the better understanding of topics covered.

2. “Intelligent Manufacturing Systems” by Andrew Kusiak

“Intelligent Manufacturing Systems” Book Review: This book defines the structure and function of knowledge based systems. This book presents hardware and software components of flexible machining, flexible assembly and computer integrated manufacturing systems. The book covers the optimization-based systems in the areas of design of products and components, design for automated assembly, process planning, equipment procurement, layout design, group technology, planning and scheduling. This book includes discussions of manufacturing, artificial intelligence and optimization concepts. This book provides a presentation of design and management aspects of modern manufacturing systems.

3. “Manufacturing Systems: An introduction to the technologies” by D J Williams

“Manufacturing Systems: An Introduction to the technologies” Book Review: The book introduces the principles of individual technologies and their integration into complete, automated, programmable manufacturing facilities and systems. The book indicates how the complete manufacturing facility can be viewed as a system. This book is designed for undergraduate seniors, postgraduate students and practising engineers. This book deals with essential topics as factory layouts, machine tool programming languages, advanced machine tools, industrial robots and automated cells.

4. “Manufacturing Processes and Systems” by Phillip F Ostwald and Jairo Munoz

“Manufacturing processes and Systems” Book Review: The book provides over 400 manufacturing processes and uses a systems direction to manufacturing. This book provides the modern definition of processes and its evaluation. The book also includes the recent developments in the subject. The book starts with the topic: The manufacturing system. This book covers nature and properties of materials, production of ferrous metals, production of nonferrous metals, foundry processes, contemporary casting processes, pressworking and operations, heat treating, plastic materials and processes, electronic fabrication, metrology and testing, quality systems, cost estimating, bibliography, operations planning and photo credits.

5. “Cellular Manufacturing Systems: An Integrated Approach” by Parashar and B S Nagendra

“Cellular Manufacturing Systems: An Integrated Approach” Book Review: This book is designed for postgraduate students of mechanical engineering and production engineering with specific knowledge in manufacturing systems. The book starts with the introduction and history of cellular manufacturing. This book covers cell formation techniques, processing the exceptional components in cellular manufacturing, evaluation of cellular manufacturing solutions, cell characteristics, production control activities in cellular manufacturing, implementation issues in cellular manufacturing. The book provides a case study about cellular manufacturing. This book provides review questions at the end of every chapter. The book provides conclusions at the end of each chapter.

6. “Manufacturing Decision Support Systems (Manufacturing Systems Engineering Series)” by imusti
7. “Changeable and Reconfigurable Manufacturing Systems (Springer Series in Advanced Manufacturing)” by imusti
8. “Stochastic Models of Manufacturing Systems” by J George Shanthikumar and J A Buzacott

“Stochastic Models of Manufacturing Systems” Book Review: This book is designed for professionals working in the area of manufacturing system modelling. The book discusses the major issues that have to be addressed in the design and operation of each type of system. The book covers flow lines, job shops, transfer lines, flexible manufacturing systems, flexible assembly systems, cellular systems. This book explores the stochastic models of different varieties of manufacturing systems.

9. “Industrial Hydraulic Systems: Theory and Practice” by Joji Parambath

“Industrial hydraulic Systems: Theory and Practice” Book Review: This book is designed for designers, engineers, technicians, and students of engineering colleges, polytechnics, and vocational training centers. This book covers conventional hydraulic systems surrounding fixed-displacement pumps, control valves, actuators, conventional hydraulic systems surrounding variable-displacement pumps. The book also describes auxiliary devices such as reservoirs, filters, accumulators and piping. The quantities in this book are given in the SI system as well as in the English system of units. The book provides information about hydrostatic transmission, cartridge valves, load sensing pump controls, design, installation and maintenance aspects of hydraulic systems. This book provides working examples, design problems and review questions at the end of every chapter.

10. “Manufacturing Systems Design and Analysis” by B Wu

“Manufacturing System Design and Analysis” Book Review: This book describes how structured approaches in design and evaluation of modern manufacturing plant may be adopted, with the aim of improving the performance of the factory as a whole. This book starts with the overview of manufacturing systems analysis in the technological age. The book is divided into four parts. The first part of the book deals with systems. The second part of the book deals with manufacturing. The third part of the book deals with systems engineering and the fourth part deals with manufacturing systems. Review questions are provided at the end of each chapter.

People who are searching for Free downloads of books and free pdf copies of these books on Automation In Manufacture – we would like to mention that we don’t have free downloadable pdf copies of these good books and one should look for free pdf copies from these Authors only if they have explicitly made it free to download and read them.

We have created a collection of best reference books on “Automation In Manufacture” so that one can readily see the list of top books on “Automation In Manufacture” and buy the books either online or offline.

If any more book needs to be added to the list of best books on Automation In Manufacture subject, please let us know.

advertisement
advertisement
Subscribe to our Newsletters (Subject-wise). Participate in the Sanfoundry Certification contest to get free Certificate of Merit. Join our social networks below and stay updated with latest contests, videos, internships and jobs!

Youtube | Telegram | LinkedIn | Instagram | Facebook | Twitter | Pinterest
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & technical discussions at Telegram SanfoundryClasses.