Best Reference Books – Advanced Manufacturing Process Simulation and Management

«
»
We have compiled the list of Top 10 Best Reference Books on Advanced Manufacturing Process Simulation and Management subject. These books are used by students of top universities, institutes and colleges. Here is the full list of top 10 best books on Advanced Manufacturing Process Simulation and Management along with reviews.

Kindly note that we have put a lot of effort into researching the best books on Advanced Manufacturing Process Simulation and Management subject and came out with a recommended list of top 10 best books. The table below contains the Name of these best books, their authors, publishers and an unbiased review of books on "Advanced Manufacturing Process Simulation and Management" as well as links to the Amazon website to directly purchase these books. As an Amazon Associate, we earn from qualifying purchases, but this does not impact our reviews, comparisons, and listing of these top books; the table serves as a ready reckoner list of these best books.

1. “Advanced Modeling and Optimization of Manufacturing Processes: International Research and Development (Springer Series in Advanced Manufacturing)” by R Venkata Rao

“Advanced Modeling and Optimization of Manufacturing Processes: International Research and Development (Springer Series in Advanced Manufacturing)” Book Review: This book is designed for designers, manufacturing engineers, practitioners, researchers, advanced students in mechanical, industrial, and manufacturing engineering. Book mainly focuses on the latest international research and development trends in the modeling and optimization of manufacturing processes. It provides examples of various manufacturing processes to discuss advanced modeling and optimization techniques. various manufacturing processes, mathematical models, traditional and non-traditional optimization techniques are discussed in this book. It covers the latest technological advances, including rapid prototyping and tooling, micromachining, and nano-finishing.

2. “Filtration Equipment Selection, Modelling and Process Simulation” by Richard J Wakeman and E S Tarleton

advertisement
“Filtration Equipment Selection, Modelling and Process Simulation” Book Review: This book is designed for the Engineers. The main aim of this book is to inform engineers about the available equipment options for solid/liquid separation. This book focuses on design and simulation, linking practical aspects of filter selection and design of models so that an engineer can make an equipment for a particular separation problem. And it provides the information of applicable models so that meaningful design and simulation calculations can be fulfilled. The role of expert systems and computer simulations are also explained in this book.

3. “Advanced Process Control and Simulation for Chemical Engineers” by Katia Ghanadzadeh Samper and Reza Khodaparast Haghi

“Advanced Process Control and Simulation for Chemical Engineers” Book Review: This book is designed for chemical engineering courses as well as for the teaching of mechanical, nuclear, industrial, and metallurgical engineering. The chapters covered in this book are growth of educational, scientific, and industrial research among chemical engineers. It covers the experimental data on thermodynamics, main techniques used for chemical processing. The topics which are also discussed are – unified approach to model representations, statistical quality control, and model-based control.

4. “Diffusion Processes in Advanced Technological Materials” by Devendra Gupta

advertisement
advertisement
“Diffusion Processes in Advanced Technological Materials” Book Review: This book is designed for engineers, chemists, and physicists. The main aim of this book is to give information about atoms, diffusion processes and various other properties used in advanced technological materials. It covers nanotechnology, surface science, materials science, and semiconductors. Some important topics which are covered in this book are organic chemicals, polymers, granular materials, complex oxides, metallic glasses, and quasi-crystals, polycrystalline, MEMS, electronics, and other applications of current.

5. “Advanced Thermoforming: Methods, Machines and Materials, Applications and Automation (Wiley Series on Polymer Engineering and Technology)” by Sven Engelmann

“Advanced Thermoforming: Methods, Machines and Materials, Applications and Automation (Wiley Series on Polymer Engineering and Technology)” Book Review: This book is designed for engineering professionals and students. This book explains about thermoforming materials, processes, and its applications. It covers topics like development, design, machine and mold technology, proper handling of semi-finished products and formed parts, basic principles of extrusion etc. This book also helps us in learning how technology helps us in order to design and manufacture products at minimum cost and maximum efficiency. It also covers the application of advanced thermoforming for the production of technical parts and packaging. It also gives information about new technologies that offer higher productivity, better quality, and are available at a cheaper rate.

6. “Operations Management in Automotive Industries: From Industrial Strategies to Production Resources Management, Through the Industrialization Process” by Marco Gobetto

advertisement
“Operations Management in Automotive Industries: From Industrial Strategies to Production Resources Management, Through the Industrialization Process” Book Review: This book is basically designed for automotive engineering students. The main aim of this book is to provide the information about the basics of industrial management. This book deals with the production management of automotive Engineering. This book covers the management analysis of the main resources needed in production, supply chain management and collecting techniques. Also a specific chapter also contains the basics of production management where all main relevant definitions, techniques and criteria are covered, including some numerical examples. It also discusses the product development, “make or buy” decision strategies to the manufacturing systems.

7. “A Systems Approach to AMT Deployment (Advanced Manufacturing)” by D R Towill and J E Cherrington

“A Systems Approach to AMT Deployment (Advanced Manufacturing)” Book Review: This book deals with introduction of the production environment. It discusses the importance of learning curve modelling. This book informs that “A Systems Approach to AMT Development” is part of the advanced manufacturing series. This book explains that a systems approach to AMT Development works with a variety of industries. Various topics are covered in this book and one of them is payback periods. It basically explains the properties of advanced manufacturing technology (AMT). It also discusses how the introduction of AMT has made a significant impact internationally.

8. “Justifying Investment in Advanced Manufacturing Technology” by The Chartered Institute of Management Accountants the Institution of Production Engineers

advertisement
“Justifying Investment in Advanced Manufacturing Technology” Book Review: It is basically designed for the production engineers.This book informs that a creative analysis approach is used to investigate the important topic of justification of AMT. It also discusses the level of functional integration and the level of effort applied to several activities during the justification stage of the AMT projects. This book provides information like results of research on the “justification of investment”. The main objective of this book is to examine the whole area of the “justification of investment”. It also explains the factors which supported the introduction of advanced manufacturing technology (AMT) in engineering manufacture.

9. “Advances in Manufacturing: Decision, Control and Information Technology (Advanced Manufacturing)” by Spyros G Tzafestas

“Advances in Manufacturing: Decision, Control and Information Technology (Advanced Manufacturing)” Book Review: This book deals with operation to manufacture old and new high-quality products with speed, accuracy and economy. The topics which are covered in this book are Process planning/scheduling, machine-cell design process, monitoring, inspection, diagnosis and maintenance forecasting, optimization, control design and control of robotic automated crane systems. This book also explains its applications such as laser material processing, stereolithography systems, alimentary pasta processes and automated/robotic road construction and maintenance.

10. “Intelligent Manufacturing:: Programming Environments for CIM (Advanced Manufacturing)” by William A Gruver and J C Boudreaux

advertisement
“Intelligent Manufacturing:: Programming Environments for CIM (Advanced Manufacturing)” Book Review: This book informs that the intelligent manufacturing is part of the advanced manufacturing series. It basically deals with the programming environments for manufacturing and discusses the specific software systems developed for industrial application. It explains how manufacturing languages can be used to create computer controlled machines and intelligent sensors in automated manufacturing systems including machine tools, robots, inspection and material handling equipment. It also covers the topic like state-of-the-art, trends in manufacturing languages and programming environments etc.

People who are searching for Free downloads of books and free pdf copies of these top 10 books on Advanced Manufacturing Process Simulation and Management – we would like to mention that we don’t have free downloadable pdf copies of these good books and one should look for free pdf copies from these Authors only if they have explicitly made it free to download and read them.

We have created a collection of best reference books on "Advanced Manufacturing Process Simulation and Management" so that one can readily see the list of top books on "Advanced Manufacturing Process Simulation and Management" and buy the books either online or offline.

If any more book needs to be added to the list of best books on Advanced Manufacturing Process Simulation and Management subject, please let us know.

Sanfoundry Global Education & Learning Series – Best Reference Books!

advertisement
advertisement
Subscribe to our Newsletters (Subject-wise). Participate in the Sanfoundry Certification contest to get free Certificate of Merit. Join our social networks below and stay updated with latest contests, videos, internships and jobs!

Youtube | Telegram | LinkedIn | Instagram | Facebook | Twitter | Pinterest
Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & technical discussions at Telegram SanfoundryClasses.