Best Reference Books – Additive Manufacturing Technology

We have compiled the list of Top 10 Best Reference Books on Additive Manufacturing Technology subject. These books are used by students of top universities, institutes and colleges. Here is the full list of top 10 best books on Additive Manufacturing Technology along with reviews.

Kindly note that we have put a lot of effort into researching the best books on Additive Manufacturing Technology subject and came out with a recommended list of top 10 best books. The table below contains the Name of these best books, their authors, publishers and an unbiased review of books on "Additive Manufacturing Technology" as well as links to the Amazon website to directly purchase these books. As an Amazon Associate, we earn from qualifying purchases, but this does not impact our reviews, comparisons, and listing of these top books; the table serves as a ready reckoner list of these best books.

1. “Additive Manufacturing Technologies” by Ian Gibson and David Rosen

“Additive Manufacturing Technologies” Book Review: The book explains how to join materials to form parts. The book overviews rapid prototyping and layered manufacturing. The book starts with basics. The book covers applications like micro-scale manufacturing, medical applications. Aerospace, and rapid manufacturing is also discussed. Support technologies like software systems and vacuum casting are discussed. Investment casting, plating, infiltration and other systems are also there. The book has recent developments of ASTM, SI. There are new topics like automotive technology, aerospace technology. Low-cost AM technologies are also there.

2. “Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing” by Ian Gibson and David Rosen

advertisement
“Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing” Book Review: The book explains how to join materials to form parts. The book overviews rapid prototyping and layered manufacturing. The book starts with basics. The book covers applications like micro-scale manufacturing, medical applications. Aerospace, and rapid manufacturing is also discussed. Support technologies like software systems and vacuum casting are discussed. Investment casting, plating, infiltration and other systems are also there. The book has recent developments of ASTM, SI. There are new topics like automotive technology, aerospace technology. Low-cost AM technologies are also there.

3. “Additive Manufacturing of Metals: From Fundamental Technology to Rocket Nozzles, Medical Implants, and Custom Jewelry (Springer Series in Materials Science)” by John O Milewski

“Additive Manufacturing of Metals: From Fundamental Technology to Rocket Nozzles, Medical Implants, and Custom Jewelry (Springer Series in Materials Science)” Book Review: The book explains how to join materials to form parts. The book overviews rapid prototyping and layered manufacturing. The book starts with basics. The book covers applications like micro-scale manufacturing, medical applications. Aerospace, and rapid manufacturing is also discussed. Support technologies like software systems and vacuum casting are discussed. Investment casting, plating, infiltration and other systems are also there. The book has recent developments of ASTM, SI. There are new topics like automotive technology, aerospace technology. Low-cost AM technologies are also there.

4. “Design for Additive Manufacturing” by Dr Tom Page

advertisement
advertisement
“Design for Additive Manufacturing” Book Review: This book provided an introduction on Additive Manufacturing. The book describes Design for Manufacture constraints. This is done by Injection Moulding. Various new methods of designs are also explained. This includes the need to remove excess resin from hollow geometry. Consumer awareness of the topic is also given.
5. “Additive Manufacturing: Advanced Manufacturing Technology in 3d Print Deposit” by Sabrie Soloman

“Additive Manufacturing: Advanced Manufacturing Technology in 3d Print Deposit” Book Review: The book explains how to join materials to form parts. The book overviews rapid prototyping and layered manufacturing. The book starts with basics. The book covers applications like micro-scale manufacturing, medical applications. Aerospace, and rapid manufacturing is also discussed. Support technologies like software systems and vacuum casting are discussed. Investment casting, plating, infiltration and other systems are also there. The book has recent developments of ASTM, SI. There are new topics like automotive technology, aerospace technology. Low-cost AM technologies are also there.

6. “Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing” by Ian Gibson and David W Rosen

“Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing” Book Review: The book explains how to join materials to form parts. The book overviews rapid prototyping and layered manufacturing. The book starts with basics. The book covers applications like micro-scale manufacturing, medical applications. Aerospace, and rapid manufacturing is also discussed. Support technologies like software systems and vacuum casting are discussed. Investment casting, plating, infiltration and other systems are also there. The book has recent developments of ASTM, SI. There are new topics like automotive technology, aerospace technology. Low-cost AM technologies are also there.

advertisement
7. “Laser Additive Manufacturing of High-Performance Materials” by Dongdong Gu

“Laser Additive Manufacturing of High-Performance Materials” Book Review: The topic is described for high-performance new materials components. This is based on non traditional methods. This can be incremental manufacturing philosophy. Prospects of new metallic materials are discussed. They can be developed by laser additive manufacturing process.Materials can be nanostructured, in situ composite, particle reinforced metal matrix composites. Prime focus is laser additive manufacturing technology. It explains how laser technology is linked with materials science, and engineering sciences. This book can be used by researchers and students. It can also be used by practicing engineers and manufacturing industry professionals.

8. “The 3D Printing Bible: Everything You Need To Know About 3D Printing” by Jerry Rogers
9. “Advances in 3D Printing and Additive Manufacturing Technologies” by David Ian Wimpenny and Pulak M Pandey

“Advances in 3D Printing and Additive Manufacturing Technologies” Book Review: This is a new and edited volume of the book. It explains the topic and their applications. This book is for designers, R&D personnel, and practicing engineers. It helps to understand state-of-the-art developments of 3D Printing and Additive Manufacturing.

advertisement
10. “Technology of Reduced-Additive Foods” by Jim Smith

“Technology of Reduced-Additive Foods” Book Review: This book studies how to reduce use of additives in food. It also studies development of new and acceptable additives. This book covers the latest research done in this field. Their results are also published. Starter cultures in dairy products, meat products and bread are in the 1st chapter.

People who are searching for Free downloads of books and free pdf copies of these top 10 books on Additive Manufacturing Technology – we would like to mention that we don’t have free downloadable pdf copies of these good books and one should look for free pdf copies from these Authors only if they have explicitly made it free to download and read them.

We have created a collection of best reference books on "Additive Manufacturing Technology" so that one can readily see the list of top books on "Additive Manufacturing Technology" and buy the books either online or offline.

If any more book needs to be added to the list of best books on Additive Manufacturing Technology subject, please let us know.

Sanfoundry Global Education & Learning Series – Best Reference Books!

Participate in the Sanfoundry Certification contest to get free Certificate of Merit. Join our social networks below and stay updated with latest contests, videos, internships and jobs!
Join Sanfoundry@YouTube
advertisement
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He is Linux Kernel Developer & SAN Architect and is passionate about competency developments in these areas. He lives in Bangalore and delivers focused training sessions to IT professionals in Linux Kernel, Linux Debugging, Linux Device Drivers, Linux Networking, Linux Storage, Advanced C Programming, SAN Storage Technologies, SCSI Internals & Storage Protocols such as iSCSI & Fiber Channel. Stay connected with him @ LinkedIn | Youtube | Instagram | Facebook | Twitter