There are lots of great material on Design of Heat-Exchange Equipment subject in the internet, buts its always a challenge to figure out a ready list of top books on Design of Heat-Exchange Equipment that one can refer to immediately. Even though online materials are good, but nothing can beat the depth of coverage that a book can offer. Hence, we researched the list of Design of Heat-Exchange Equipment books which are used by students worldwide and came up with top 10 Book Recommendations on Design of Heat-Exchange Equipment subject. These books can be used as a great starting point for anyone studying Design of Heat-Exchange Equipment and can also be used as a ready reference for Under-Graduate and Post-Graduate programs.
Most of these Design of Heat-Exchange Equipment books are also in the best-seller lists in Amazon website. We have added a brief description of these best books and have also included direct links to Amazon site (as affiliate). This allows anyone to directly visit the site and order printed copies of these best books.
Here is the full list of best reference books on Design of Heat-Exchange Equipment.
|1. “Heat Exchangers – Thermal Hydraulic Fundamentals and Design” by S. Kokac
Book Review: This book focuses on the selection, design, rating and operational challenges of different types of heat exchangers. This book covers different types of heat exchangers that also include condensers and evaporators. The book also classifies different types of heat exchangers and illustrates many methods for sizing and rating. The book also includes two phase flow heat transfer correlations for thermal design and also covers topics like pressure drop and pumping power analysis. The book also contains a chapter on fouling problem. The book also provides information on thermo physical properties of fluids and contains many examples to illustrate the methods and procedures.
|2. “Extended Surface Heat Transfer” by D.Q. Kern and A.D. Kraus
Book Review: This book focuses on theory, design and analysis of a series of surface types. The book also covers compact heat exchangers, periodic heat flow, boiling off finned surfaces and many other important topics. The book covers all aspects of extended surface technology that includes basics of extended surface analysis, Murray Gardner assumptions, single fins analysis and finned array optimization. The book also contains chapters on finned passages, heat exchanges for different configurations, radiation effects, optimum designs and many more.
|3. “Compact Heat Exchangers” by W.M. Kays and A.C. London|
|4. ” Step by Step Guideline for Plate and Frame Heat Exchanger Design, Sizing, Purchasing, and Installing: Save your time in designing and cross-checking vendor’s design” by Wiroon Tanthapanichakoon|
|5. “Design And Technology Of Heat Pipes For Cooling And Heat Exchange” by Cal Silverstein|
|6. ” Advances in Heat Exchanges Design, Radiation, and Combustion, 1991: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Atlanta, Georgia” by M. A. Ebadian|
|7. ” Closed Feedwater Heaters for Power Generation: A Working Guide” by Stanley Yokell|
|8. “Perry’s Chemical Engineers’ Handbook” by Don W. Green|
If any more book needs to be added to the list of best books on Design of Heat-Exchange Equipment Subject, please let us know.
Sanfoundry Global Education & Learning Series – Best Reference Books!